Question about 1993 Chevrolet Lumina APV

1 Answer

Wipers only work when switch is in high,but when i shut the switch off the wipers stop werever they are at the time.they do not work on intermitent or slow speed.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I had the same problem with my 93 Lumina and then it would work ramndomly then quit Wiper motor was the problem Changed all fuses first to no avail Wiper motor fuses are under the glove box behind the coweling as well as in the fuse box beside the glovebox for info

Posted on Apr 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 chevy silverado wipers only work on high.


It appears that the unit on the back of the wiper motor is out of sync with the motor movement It can be reset but generally unless you are capable of doing this best get a replacement wiper unit

Jan 07, 2013 | 2004 Chevrolet Silverado 1500

1 Answer

The wipers go on by themselves intermitently and at irregular spe


DISCONNECT WIRING FROM THE WIPER CONTROL SWITCH.IF WIPERS STOP REPLACE SWITCH IF THE WIPERS KEEP RUNNING YOU HAVE A DEFECTIVE LIMIT SWITCH IN THE MOTOR.YOU HAVE TO REPLACE WIPER MOTOR.

Feb 15, 2010 | 1997 Ford F150 Regular Cab

1 Answer

Wipers dont work on intermitent thry work on high and low but stop on windsheild when pulsed this is a 2000 L 2


replacing the front wiper motor on the early L series is not difficult.
search around in fixya and you will find my instructions somewhere
at least twice. do not buy a replacement wiper motor from saturn, they are much cheaper through advance or autozone.

before you begin the repair, make sure your wiper switch is off and note the
wipers off position of the crank arm as stamped onto the wiper mount. this will make sense after you have the assembly out of the car and are replacing the wiper motor. if you ignore that mark then the wipers will be in the wrong position all the time.

Nov 27, 2009 | 2000 Saturn Ls 4dr Sedan

1 Answer

Which fuse controls the windshield wipers??


There is no separate fuse for intermittant. You have a wiper fuse, and that's all. If that part has stopped , you have a probel with the switch, or the circuit board for your wiper motor.

Jun 06, 2009 | 1998 Isuzu Amigo

1 Answer

Wipers stop after 5 minutes of slow or intermiant speed use.


Try replacing the Wiper Motor Pulse Board Module. It is available at aftermarket parts stores, it is easy to replace, and it is a high failure item. Eventually, the module will fail completely and leave you with no wipers.

Feb 25, 2009 | 2001 Oldsmobile Intrigue

1 Answer

99 jeep wrangler wipers only work on high setting


your switch is broken, take it in and get the switch replaced.

tepfy

Jan 09, 2009 | 1999 Jeep Wrangler

1 Answer

Cruise Control, intermitent wipers acting up.


More then likely, the switch arm will have to be replaced, everything that contyrols your wipers and cruise are built into that left arm.

I hope this helps you.

Dec 31, 2008 | 2003 Jeep Grand Cherokee

3 Answers

Windshield wiper switch


the most common problem is called the multi-function switch or turn signal switch--replace it----8 out of 10 thats the problem

Jun 27, 2008 | 1991 Ford Explorer

Not finding what you are looking for?
1993 Chevrolet Lumina APV Logo

Related Topics:

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...