Question about 1995 Dodge Dakota

2 Answers

95 dodge dakota heater blower not working

My 95 dodge dakota truck,s heater (blower)is not working, would o need to pull the dash, like when replaceing a heater core??

Posted by on

  • Anonymous Mar 12, 2014

    +replcing heater core dodge dakota 2004

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 153 Answers

It has been a long time since I've replaced one of those. From what I remember you don't have to go through pulling the heater box out. You do need to remove the glove box assembly. Look up under the passenger side of the dash. If you see the bulge of the motor/cover hanging straight down then remove the cover and the motor will be there. If you don't see that then te motor is mounted horizonally. If that is the case then the fresh air door assembly will need to be removed and it is behind that.
Here is a quick check to see if the motor is bad. Thump the bottom of the heater box by the passenger's feet. if the motor comes alive or makes noise then it is bad. Also check the fuse and make sure that it doesn't work on any speed. (the resistor would prevent operation on only one speed or more but generally not all speeds)

Posted on Apr 05, 2009

  • Patrick Miller Apr 05, 2009

    I just checked my resources and found out this motor is horizontally mounted. When you remove the fresh air door cover/assembly. Remove the vacumm diaphram first. makes it easier to find the screws. Once that is out of the way you will need to remove the squirrel cage from the motor then you will easily see the three screws holding the motor in place. There is a vent hose on the back side. And the wiring comes up the back side to the top and towards you. The connector is easily visible right in front.

    Good luck and let me know how that works.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Yes the dash will have to come off to replace the core (pain). But first check under the hood to see if the resister is rusted out (mine was+fan bad). Way less work and cheep to free at junk yard. Located mounted on the front left of the back wall once hood is open. held on by 2 screws. Very easy to see if bad or good. Piece is about 4"x 2". There should be 3 coils of wires on the inside. If any are rusted apart this piece is bad. Good Luck! Winters coming!

Posted on Sep 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the heater resistor on a 2005 dodge dakota? Behind glove box?


should be just above the blower motor. You will need to remove the glove box door to gain access.

Dec 12, 2015 | 2005 Dodge Dakota Club

1 Answer

How do I get to the blower motor for a 1995 dodge Dakota to replace it ?


Bad design on the 1995 Dodge Dakota. The dash has to be removed to replace the blower motor. May want to replace the heater core while the dash is out to keep from having to remove it later for a leaking heater core.

Feb 17, 2015 | Dodge Cars & Trucks

1 Answer

1998 dodge dakota blower works but no air comes out


Here's a video on your door that is not opening to let air out.

Jan 20, 2013 | 1998 Dodge Dakota

1 Answer

I need instruction on replacing heater core in a 1998 dodge dakotain picture form along with words


i just pulled my heater core from my 97 dakota. first pull the negitive cble from the battery next start with pulling all the plastic from the dash and kick pannels. Next yu need ti pull the bolts from the dash and under the dash. third drop the stering wheel and let it set in the seat. Forth you need to pull your heater hose lines loose from the heater core and your evaporater from the cooler. next you need to pull the passenger side of the dash out about one and a half feet to get the heater box out and to put it back together go in rev the way you took it out.

Jan 23, 2011 | 1998 Dodge Dakota

1 Answer

87 dodge dakota heater blower stopped workng


The blower resistor will burn and smell without blowing a fuse

Feb 04, 2010 | 1987 Dodge Dakota

1 Answer

97 dodge dakota. Tried to replace the heater


There is some wire shorted to ground during the dash work due to some pinched points. Need to revisit the re-installation work.

Dec 12, 2009 | Dodge Dakota Cars & Trucks

3 Answers

Heater blower switch broken


mine was doing the same, then just quit all together. I went and got a resistor and everything is working again. Pretty easy to replace as well.

Dec 29, 2008 | 2001 Dodge Dakota

1 Answer

Cannot get to heater blower motor in 1993 Dodge Dakota


its a big job get yourself a hanes manual the module is the complete heater box underdash you have to pump down a/c. i put heater core and blower motor in a 95 dakota its not a fun thing to do

Dec 08, 2008 | 1995 Dodge Dakota

1 Answer

1998 Dodge Dakota heater nor a/c blowing


I have an 2002 Dakota , my blower is on passenger side of truck, under dash by feet there was 4 small screws to take out blower just came out on mine. Something to check see if there is a electronic card in behind the blower, mine had that, change the card if it has one that controls your blower speeds, when mine went bad only had off and high for a few months, then none, changed blower no go, then found out about this card, dealer cost about $75 canadian, auto wreckers $25 canadian ... hope this helps.

Dec 01, 2008 | 1998 Dodge Dakota

Not finding what you are looking for?
1995 Dodge Dakota Logo

628 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...