Question about 2001 Mercury Grand Marquis

1 Answer

My Vauxhall Vectra 1800 have just failed its MOT on rear seat belt 'fluffing'. No one ever sits in the rear of my car, and the same garage passed it last year. I have done nearly 500 miles this year. Are they right to fail the car for this, can it be repaired or must I replace the belt.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 76 Answers

Yes they can fail it but if u remove the rear seat and belt then it will pass advise NO REAR SEAT but they cant fail it 4 not being there as they cant acually test it! thanks jezza

Posted on Jul 24, 2009

3 Suggested Answers

SOURCE: Audi A4 coil pack

There are 4 coils, one for each cylinder. Audi tend to replace one at a time to save costs. So yes this is probably quite likely.

Posted on Oct 13, 2008

  • 13 Answers

SOURCE: remove servo from 2001 vauxhall vectra 1.8

You can download a repair manual here (8.51 MB):- http://vectra-c.swi.hu/VectraManual.pdf Hope this helps.

Posted on Jul 25, 2009

  • 1 Answer

SOURCE: How do i fix a loose wing mirror on my car?

Solution 1 works, but I had a more complex problem with the mirror in my corsa. The three screws have to be driven into cylindrical projections which sit on the outer triangle. Two of these three projections were broken, so the holes were not reachable with standard sized bolts from the inside. I somehow managed to get one screw which was long enough to reach the hole. So now the mirror is held by two screws. I could do nothing about the third one. However, the mirror doesn't wobble now. Hope is stays that way!

Posted on Sep 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Vauxhall corsa 2007 subframe dangerously rust the garage wouldn't let me drive it wen I took it for its mot going to complain to vauxhall


your sub frame is holding the engine in place and if its rusted to a state where the structure is seriously weakened.
at this point garage will not let you or other road user face risk

Mar 30, 2016 | Vauxhall Cars & Trucks

1 Answer

How do i fix a jammed rear seat belt


You must remove the rear seat bottom and remove the bolt for the seat belt retractor, this will allow you to in jam the seat belt.

Dec 13, 2015 | Vauxhall Astra Cars & Trucks

1 Answer

2000 Reg Vectra Engine Management Light On


Have you cleared all the faults?
Try it again after clearing.

Feb 18, 2014 | Cars & Trucks

1 Answer

When throttle is applied after being on the over run, sluggish and misfires. Vauxhall Vectra 1800 cc petrol 2001.


need to find what fault code is first then it should tell you what part or what as failed

Aug 06, 2013 | Cars & Trucks

1 Answer

On my vauxhall zafira 2007 the rear offside wheel bearing squeaks after driving for five to ten minutes tust pass mot wheel smoked when get home is it bearing


What makes you sure its the bearing? Sound like your brake to me? Is the brake disc or brake drum a rusty red colour?

Jun 18, 2012 | Vauxhall Astra Cars & Trucks

1 Answer

Just after a diagram of the fuse box for my vauxhall vectra


On this website (link below) you find fuse box diagram and description for Vauxhall Vectra C

Vauxhall Vectra 2002 2008 fuse box diagram Auto Genius

Feb 18, 2012 | 2003 Vauxhall Vectra

1 Answer

Vauxhall vectra c noise when going over bumps


jack front of car up clean around the coil spring where it sits on the shock absober probably do this with your fingers and a screw driver to clean the grit out, then squirt some oil on he bottom of the spring and where it sits on the shock absorber do the same with tho other side.might have to repeat every 3 months especially in winter

Aug 14, 2009 | 1998 Volkswagen Golf

2 Answers

Toyota avensis 2002 1798cc, headlights beam is low need to raise


you need to bring it to a garage with a headlight alignment machine to pass an MOT. ensure the headlight position switch (on the right hand side of the dash) is set to "0"

Mar 22, 2009 | 2002 Toyota Camry

Not finding what you are looking for?
2001 Mercury Grand Marquis Logo

Related Topics:

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...