Question about 1992 Daihatsu Charade

1 Answer

Can't get my car into first gear when stopped, Australian Ford

When sitting at the lights, I push the clutch in ready to go, push the gear stick to go into 1st gear. Have to lean on it to make it go in.
Are the syncro's warn out it is it just and adjustment problem?

Posted by on

  • my_d21 May 11, 2010

    will it go into gear if rolling slightly.probaly syncro then.



    could be syncro,hydrolic master clutch, adjustment,if cable clutch check firewall for bent metal around where cable goes out or in..

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 508 Answers

Sounds like it could be just an adjustment problem. If your car has a cable to the clutch it could be stretched enough to not let it disengage enough. Or the other scenario is that your pressure plate and disk are worn out finally. Try the adjustment first.

Posted on Mar 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 ford ranger, My stick wont go into fifth gear position.


When you put the Shift Handle back into the TOP of the transmission, there is a spring on the Top and it that comes loose, it would cause this.

BTW... it happened to me

Pull the Stick UP, Clean the Ball, make sure all the parts are there and that the spring that you push against is there and reinstall

Apr 15, 2013 | 1992 Ford Ranger

1 Answer

I am unable to put my 2001 Ford Escape xls into gear! When I push the clutch pedal down all the way to the Floor and try to enter a gear it will not go at all. I had issues with it in the morning it did...


that is your clutch pump/cable in not functioning. u need to check the fluid level (if your car using hydraulic clutch) or your clutch cable broke...

Nov 19, 2010 | 2001 Ford Escape

1 Answer

After a few miles clutch sticks but gear change


For one thing you don't know the year of your vehicle. they stopped making the ford festiva in 1993

Aug 01, 2010 | 1993 Ford Festiva

1 Answer

Stick shift


Hi:
The shift pattern is pretty much the same on all 5 speed cars. The top row is the odd numbers, 1-3-5
the bottom row is 2-4-Reverse. The center position is neutral

Here is the key: The shifter is slightly spring-loaded to the center position. If you hold in the clutch pedal and pull the shifter to neutral, and let go of it, it will automatically be lined up in the position, that if you pushed it forward , it would go to 3rd gear, and if you pulled it back, it would go into 4th gear.
This way, to start driving, you start out in neutral, grab the shifter lightly, and push it first to the left, then forward. This is first gear, where you start out. when you want to shift to second, push in the clutch, and keeping left pressure on the shifter, pull all the way back . Here is the easy part, 2nd to 3rd. When you are ready, push in the clutch, and just push the gear shift forward , till it hits neutral, and is spring loaded to the middle. Then you just push it straight forward to 3rd, then next shift, straight back to 4th.
Last gear, 5th: push forward to the neutral row, then Push to the right till it lines up ,and forward to the 5th gear. Reverse should only be shifted into from a dead stop. Find neutral, push the shifter all the way right, then pull back towards you. Hope this helps.
Practice a bunch in the driveway!

Apr 21, 2010 | 2001 Hyundai Elantra

1 Answer

Overdrive light flashes on shifter then. Truck shuts off. I already replaced the speed sensor as that was the code it gave


sounds like the torque convertor clutch is staying locked up and not relsing when it quits running does it jurk like you were driving a stick shift and tryed to stop withe the car in gear without pushing in the clutch if so this is the problem the dtc will conferm this

Dec 29, 2009 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Stuck clutch only in 1st gear


slave cylinder is starting to stick try having fluid flushed first but you may need a slve cylinder

Jul 22, 2009 | 2000 Ford Ranger SuperCab

2 Answers

2002 Ford Ranger Clutch Problems


It's not the clutch, it is the clutch slave cylinder. Check the fluid level in the clutch master cylinder and you will see that it will be empty. The problem is the trans has to be removed to replace it.

Jan 13, 2009 | 2002 Ford Ranger Regular Cab

2 Answers

Stuck in 5th gear


try bleeding your clutch

Aug 19, 2008 | 1991 Ford Ranger Supercab

Not finding what you are looking for?
1992 Daihatsu Charade Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daihatsu Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...