Question about 2001 Chevrolet Impala

1 Answer

Instrument cluster lights out on 2001 Chev Impala.

Fuses still good, still have faint light on shifter display and radio.
Can't tell speed when driving in the dark.

Posted by on

  • Anonymous Mar 04, 2009

    I have exact same problem. I replaced the BCM and it did nothing.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Replace the bulb

Posted on Mar 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Instrument control panel gear position light is out


check your fuse on the instrument cluster and light. And it is probably your stop brake switch needs to be replaced. Just had to do the stop brake switch on 95 chevy suburban. the brake light and tail lights weren't working, had to get the switch now works. good luck I hope this helps you.

Mar 23, 2013 | 2001 Mercury Sable

1 Answer

Dash and radio lights don't work at night. They are on during the day. 2003 Chev Impala. Have checked all the fuses.


The same thing happens on my 2003 Impala. I found that my dimmer switch has an intermittent failure where sometimes the dash lights go out even with the headlights on.
If I wiggle the dimmer just right, the dash, radio, steering wheel, door locks, and every other light comes on (when the headlights are on). My fix was to mount my Garmin on the steering column in front of the speedometer so when the lights go out I know how fast I'm going. A replacement dimmer (or bypassing the current one and adding a resistor) should take care of it.

Jan 11, 2013 | 2003 Chevrolet Impala

1 Answer

Dome lights, insutrument cluster and radio do not work


try checking fuses, if not there, double check for wire connectors not fully inserted during reassembly

Dec 29, 2012 | 2001 Jeep Grand Cherokee

1 Answer

My nissan Almera S reg has no side lights or dash lights.All fuses seem ok.


This solution will be of great help to you,even in the case of future or other dashboard problems;
Instrument cluster consists of electronic analog gauges, various warning lights, and optional tachometer. Vehicles equipped with tachometer have an electronic vacuum fluorescent transmission range indicator (PRND3L),odometer and trip odometer display. Vehicles without tachometer are equipped with a cable-operated transmission range indicator.
Instrument cluster is equipped with the following warning lights:
Battery voltage.
Cruise (speed control).
Door ajar.
Fasten seat belt.
Lift gate ajar.
Low fuel level.
Low windshield and washer level.
Traction Control.
The Body Control Module (BCM), which receives input from various sensors, sends display information to instrument cluster and operates gauges. Instrument cluster incorporates a self-test diagnostic feature to identify electronic problems. BCM, Powertrain Control Module (PCM), and Transmission Control Module (TCM) are continuously monitored by the diagnostic system.

SELF-DIAGNOSTICS
With ignition off, press and hold TRIP and RESET buttons while turning ignition switch to ON position. Continue to hold TRIP and RESET buttons until odometer window displays CODE (approximately 5 seconds). If problem exists, system will display diagnostic trouble codes. See DIAGNOSTIC CODE CHART table. If no problem exists, Code 999 (end test) will be displayed.
DIAGNOSTIC CODE CHART
CodeDescription
110.......Cluster Memory Fault
111.......Cluster Calibration Fault
905.......No CCD Bus Message From TCM
921.......Odometer Fault From BCM
940.......No CCD Bus Message From PCM

After diagnostic code display ends, instrument cluster will go into each of the following tests in order:
Dim test.
Calibration test.
Odometer segment test.
Electronic Transmission Range indicator segment test.
Dim Test
CHEC-0 will be displayed in odometer window. Instrument cluster will dim Vacuum Florescent (VF) display. If VF displays do not dim, a problem in instrument cluster exists. See BODY CONTROL COMPUTER TESTS in BODY CONTROL COMPUTER article.
Calibration Test
CHEC-1 will be displayed in odometer window. Each of instrument cluster gauges will move sequentially through each calibration point. See GAUGE CALIBRATIONS table. If gauge needle is not calibrated properly, a problem in instrument cluster exists.

Odometer Segment Test
CHEC-2 will be displayed in odometer window. Each segment of odometer will light sequentially. If any segment does not light, replace instrument cluster.
Electronic Transmission Range Indicator Segment Test
CHEC-3 will be displayed in odometer window. Each segment of electronic transmission range indicator will light sequentially. If any segment does not light, replace instrument cluster.

Sep 10, 2012 | 2005 Nissan Almera 1.5

1 Answer

Tranmission and instrument cluster


The speed sensor on your trans sends a signal to the electronics telling it when to shift, this will be where you fault is.

Mar 05, 2012 | 2001 GMC Yukon XL

1 Answer

Instrument cluster,radio,and no rear parking lights


begin by checking all you fuses on the left end of the dash, if all the fuses are ok you will have to write back. what led up to this problem? ex:car got jump started backwards! hint: the radio fuse and inst cluster fuses are on the left end ,the tail lamp is under hood fuse box,also check if the dome light and glove box light are working

Oct 12, 2011 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Which fuse box has blower motor fuse on 2001 chev impala


There is a blower motor resistor located up under the passenger side dash. I believe there is actually 3 fuses that can cause problems with the blower....relays/fuses should be located in the engine compartment fuse block. They are High Blower fuse-HVAC fuse-Radio/HVAC/RFA/Cluster/etc...fuse. Hope this helps.

Feb 27, 2010 | 2001 Chevrolet Impala

1 Answer

Instrument panel lights dont come on


check the fuses first, if fuses are good then check for power at dimmer switch, also are all dash lights out. meaning no night light for heater control or cig lighter or radio, if thats the case then follow my advise, but if all other lights do work then go straight to checking the bulbs in the dash cluster. hope this helps.

Dec 19, 2009 | 2001 Pontiac Aztek

1 Answer

Instrument cluster lights out


check fuses, if no fuses then small bulbs in the display may be out. If bubls are non replaceable then insturment cluster must be swapped out, that's expensive, so get to the fuses first folks.

cheers,
r

Jul 31, 2008 | 2001 Dodge Caravan

Not finding what you are looking for?
2001 Chevrolet Impala Logo

Related Topics:

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...