I just had my spark plugs changed today on my 1989 buick century. I'll tell you this, the guy had a hard time doing it and had to take things off the engine to get to them. It was about a 5 hour job for the plugs and wires. Good Luck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Typically, spark wires are encased in a flexible plastic tube which is secured in usually 2 places with special clips. The tubing material gets brittle over time and cracks /breaks easily so patience and being careful are the key. After you remove the tube from its mounting points, you will notice that the tube has a split over its entire length. Carefully spread the split open at on end then pull (one wire at a time through the split. then reverse the process with the new wires..... unfortunately this is even more difficult and requires even more patience... good luck....