2008 Nissan Xterra Logo

Related Topics:

A
Anonymous Posted on Mar 27, 2013

Vacuum hose diagram 2008 nissan xterra

A rodent got into the engine and chewed through some hoses. I need to figure out which ones I need to replace.

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Aug 12, 2008

SOURCE: vacuum hose

It's alot to handle at once but, I hope this helps you out...

<p>

http://www.courtesyparts.com/betasite/maxima-a32b-1995-1999/genuine-nissan-parts/engine-electrical/223-vacuum-piping/-c-1783_1784_1814_1817.html

Ad
GM Elec

Bruce Bracey

  • 1000 Answers
  • Posted on May 09, 2009

SOURCE: need a vacuum hose diagram for for an '88 nissan

Below is the vacuum diagram for your Nissan.
Good luck.
Regards,

FIG : Fig. 2: CLOSE X printdiagram_txt.gif print_icon.gif
0900c1528018d188.gif

daves944

Dave C

  • 1050 Answers
  • Posted on Jan 31, 2010

SOURCE: I need a vacuum hose diagram for a 1995 nissan

This should do it unless you're in California, but I have that on too if you need it.2353d32.gif

Testimonial: "thanks! its exactly what i needed"

ZJLimited

ZJ Limited

  • 17989 Answers
  • Posted on Jul 22, 2010

SOURCE: need vaccum hose diagram for 1984 nissan pick up

Check this diagrams....

2fdd710.jpg

Fig. 9: Emission control system vacuum diagram-1984 Z20 (49 States & Canada)


258c624.jpg

Fig. 10: Emission control system vacuum diagram-1984 Z24 (49 States & Canada except High Altitude)


c2a4aa8.jpg


Fig. 11: Emission control system vacuum diagram-1984 Z24 (49 States High Altitude)


19be256.jpg

Fig. 12: Emission control system vacuum diagram-1984 (Calif. w/MT)


d15ad0e.jpg

Fig. 13: Emission control system vacuum diagram-1984 (Calif. w/MT)


Hope helps (remember rated this).

ZJLimited

ZJ Limited

  • 17989 Answers
  • Posted on Aug 02, 2011

SOURCE: I need diagram of

Check this diagram about (click over image for zoom)...

zjlimited_1666.jpg

Fig. 2: Emissions system and engine control vacuum hose routing - Altima

Hope helps.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

A/C air control is stuck on defrost mode

recheck install either incorrectly done or something got disconnected
0helpful
3answers

Vacuum line diagram for a 2000 nissan Quest 3.3l engine

William, Vacuum line hoses diagram, This is what I found, check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Repair Guides Vacuum Diagrams Vacuum Diagrams AutoZone com
2000 nissan Quest 3 3l engine Vacuum line diagram Google Search
0helpful
2answers

Nissan Diagram

Diagram? I don't understand your request. Are you replacing a drive axle or a driveshaft? One is easy, one is very difficult. Both are tough if you've never done one. Be careful.
0helpful
1answer

Diagram 2004 Nissan exterra belts

My 03 Xterra is different on the back of the intake by the fuel pressure regulator that far left hose fitting is not on my intake no nipple it vacuum hose connector nothing just the other two hose connectors One is going under the intake and the far right one goes over to the FPR. So only one hose connectors you the double metal tubing things goes over to the solenoid valve.
0helpful
1answer

Hi i need a vacuum hose diagram for nissan pathfinder 89 model thanks

http://www.autozone.com/autozone/repairguides/Nissan-Pick-ups-and-Pathfinder-1989-1995/ELECTRONIC-ENGINE-CONTROLS/Engine-Co
0helpful
2answers

Can not find the back spark plug hole

if you go down right beside the intake manifold you will be able to get to it
3helpful
2answers

HOW TO REPLACE A FUEL PUMP FOR A NISSAN XTERRA


Removal & Installation

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Relieve the fuel system pressure.
  3. Drain the fuel tank.
  4. Remove or disconnect the following:

    Negative battery cable Fuel pump module harness connectors Filler hose shield Fuel pressure and return lines Filler hose Vent hose Evaporative Emissions (EVAP) hose Fuel tank skid plate Fuel tank Fuel level sender Fuel pump

To install:
  1. Install or connect the following:

    Fuel pump Fuel level sender. Tighten the screws to 17-23 inch lbs. (2.0-2.5 Nm). Fuel tank. Tighten the bolts to 27-36 ft. lbs. (37-49 Nm). Fuel tank skid plate. Tighten the bolts to 27-36 ft. lbs. (37-49 Nm). EVAP hose Vent hose Filler hose Fuel pressure and return lines Filler hose shield Fuel pump module harness connectors Negative battery cable
  2. Fill the fuel tank.
  3. Start the engine and check for leaks.

4helpful
2answers

Vaccum hoses are missing. 1986 Nissan 720 4X4

truck normally has a vacuum hose routing diagram on under side of hood on drivers side.also look for metal tag on center of engine compartment fire wall which gives you a motor id @ and trk model # you can then know what engine vacuum diagram you need.i have a diagram for an 86 720 series Z24 carb engine that can be copied off of truck..chris
Not finding what you are looking for?

936 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...