- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
written and video instructions here plus where to buy.
how to change rear struts on 300m - JustAnswerwww.justanswer.com/chrysler/3p878-change-rear-struts-300m.html
... how to change rear struts on 300m ... I am trying to change the rear struts on my Chrysler 300m. I started by trying to remove ... Traffic on JustAnswer ...
Shocks are simple to remove and reinstall. One bolt on top and one on the bottom. You can easily do this at your home garage. However struts are a different matter. I suggest you have them replace by a professional.
The hydraulic oil that is inside the strut is coming out externally meaning that the seal that contains the fluid to the inside of the strut is bad.This leads to struts not doing there job properly and will cause premature tire wear as well a decrease in vehicle handling and stability performance .The only correction is have the struts replaced.
Hello, and welcome to FixYa. I'll be glad to help you out.
When you had the struts replaced, one of two things happened.
one - the rear strut retention bolts were not tightened up properly at the tops of the struts
two- the top supports on the struts were not replaced. Whenever we change the struts, we always replace the top supports. More than likely, this is your problem. The rear strut supports are notorious for wearing out, and, when they do, they make loud banging noises.
2004 Camry rear support part numbers:
I would suggest replacing the top supports to cure your problem.
the first thing i would check is the sway bar bushings they usualy go first. you have a bushing out somwhere. ive replace many struts because people have requested new struts and when we install them they come back and complain that the clunk is still there and all it needed was a bushing kit for $20
hope this helps