Question about 1995 Mitsubishi Montero

Open Question

I have a 2.8td pajero and pwr light has come on the dash what

DOES IT MEAN ?

Posted by on

3 Suggested Answers

  • 1 Answer

SOURCE: PWR WARNING LIGHT ON PAJERO 2.8 TURBO DIESEL. WHAT

There's a switch on the dash I believe that controls the transmition settings there's normal, hold and power. You are obviously on the power setting, adjust the switch to the middle and the light will go out.

Posted on Feb 11, 2010

hairy32
  • 51 Answers

SOURCE: PWR light is on dash, what does this mean ?

This light usually indicates that you have selected the power option for your transmission shift pattern(normal or pwr)

There is a button on the center console or the shifter that selects pwr or normal trany shifting, if pressing the button again does not change the light than the button or wiring may be defective and require further diagnosing

Posted on Mar 22, 2010

  • 1861 Answers

SOURCE: what does ECT PWR green light on dash mean? It

Hello. Welcome to FixYa. Please allow us to assist you.

The ECT PWR light is on because someone has inadvertantly bumped the switch. Look on the console, by the shifter, or on the dash for a switch labeled ECT. Turn it off, and the light will go out.

The ECT PWR mode, when activated, increases the time that the transmission shifts up thru the gears. Without the mode selected, the first shift would be at 18-20 mph. With the mode selected, the first shift would be 20-22 mph. This mode basically allows the shift to occur later, and is normally used when you are towing something, or if you have a large load of cargo in the car.

Thanks for choosing FixYa for assistance. Have a great day.

Posted on Nov 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A red light on the dash comes on and starts flashing quickly when I lock the vehicle using the remote key. Is it normal?


Well a flashing red light usually means the alarm system has been activated. Flashing quickly could mean it is faulty and the alarm is not set.

Dec 19, 2015 | 2001 Mitsubishi Pajero Pininfarina

1 Answer

What does PWR mean as a light on a automatic gearbox


as I understand from a glove box book explaination
its is part of the engine management system
on most mitsubishis its for towing or hills
economy is for highway at constant speeds
how it works electronically is a mystery to me

Oct 24, 2014 | 1997 Mitsubishi Pajero

1 Answer

Orange warning light mean


which orange light
engine
brake
gearbox
or any other light??

May 17, 2014 | 2005 Mitsubishi Pajero 2000i

1 Answer

Use of a/t modegood day just to ask query regarding my mitsubishi pajero 2.8 intercooler 4wd 4m40 engine, regarding button at center this indicated with mode A/T what this mean it can help me in my dr


You can use thar switch to control transmission/gear box response, middle is for normal driving, power is for holding gears up to higher RPMs and the other ones should say some like Snow, basically starts driving the car from 2nd gear to avoid wheels slippage.

Mar 29, 2014 | 1996 Mitsubishi Delica

1 Answer

What does ECT PWR green light on dash mean? It just popped up at 160k


Hello. Welcome to FixYa. Please allow us to assist you.

The ECT PWR light is on because someone has inadvertantly bumped the switch. Look on the console, by the shifter, or on the dash for a switch labeled ECT. Turn it off, and the light will go out.

The ECT PWR mode, when activated, increases the time that the transmission shifts up thru the gears. Without the mode selected, the first shift would be at 18-20 mph. With the mode selected, the first shift would be 20-22 mph. This mode basically allows the shift to occur later, and is normally used when you are towing something, or if you have a large load of cargo in the car.

Thanks for choosing FixYa for assistance. Have a great day.

Nov 10, 2010 | 2000 Toyota Tacoma PreRunner

1 Answer

PWR light is on dash, what does this mean ?


This light usually indicates that you have selected the power option for your transmission shift pattern(normal or pwr)

There is a button on the center console or the shifter that selects pwr or normal trany shifting, if pressing the button again does not change the light than the button or wiring may be defective and require further diagnosing

Mar 22, 2010 | 1996 Toyota Camry

1 Answer

PWR WARNING LIGHT ON PAJERO 2.8 TURBO DIESEL. WHAT DOES IT MEAN


There's a switch on the dash I believe that controls the transmition settings there's normal, hold and power. You are obviously on the power setting, adjust the switch to the middle and the light will go out.

Nov 14, 2009 | 1997 Mitsubishi 3000GT

2 Answers

Mitsubushi


Hi,

To my knowledge, the indicator "PWR" signifies that your Pajero's transmission is set to "Power" mode meaning it will stay on to a gear longer before shifting. Technically, what this means is that transmission will not use the top ratio and there will be more power; that is faster acceleration.

Should you want to turn this off (normal setting), there would be a switch on your center console with something like "A/T Switch" that has to be set to the middle position.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jun 25, 2008 | Mitsubishi Outlander Cars & Trucks

Not finding what you are looking for?
1995 Mitsubishi Montero Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...