Question about 1999 Audi A6

1 Answer

I have a 1999 Audi A6.

I have the radio code but I can't get the radio out of safe mode.

Posted by on

  • Kenenth B May 11, 2010

    I've been looking all over for the code for my 1999 audi A6, could you please email me yours so i can give it a try. thanks... kenbridgeforth@gmail.com

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Entering anti-theft code The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.

  1. Turn on radio. The radio display shows "SAFE".
  2. Press the P.Scan and RBDS buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
  3. Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
  4. Once the code shown on the display is correct, press the P.Scan and RBDS buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
  5. The radio should unlock and be usable shortly afterwards.
  6. If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
  7. If you lose your radio code, contact your Audi dealer.

Posted on Mar 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 98 a6 audi has the radio locked what is the code and how can I unlock it.


IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!

The sequence of programming for 2000 Audi A4 radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Jan 18, 2011 | 1999 Audi A6

2 Answers

JUST BOUGHT 1999 AUDI A6 QUATTRO WITH CONCERT RADIO IT'S IN SAFE MODE DEALER WANTS 100 TO RESET CAN ANYONE HELP ME?


IMPORTANT NOTE: You must have the security anti-theft code for yours Audi Concert radio from the car manufacturer! For Audi Concert the sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Oct 09, 2010 | 1999 Audi A6

1 Answer

Re radio Code Audi A6 1999, I have the radio code, how do I get it off safe mode?


you just have to wait anything up to 48 hrs and then it will flash 1000 ,then enter code

Sep 17, 2010 | 1999 Audi A6

1 Answer

Radio says SAFE on 1999 Audi A6 wagon


That indicates you need to enter the radio reset code which came with the car. Or see you dealer.

Jul 24, 2010 | 1999 Audi A6

1 Answer

My audi a6 car stero


IMPORTANT NOTE: You must have the security anti-theft code for yours Audi Concert radio from the car manufacturer! For Audi Concert the sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Please rate my response. Thanks !

Apr 08, 2010 | 1999 Audi A6

1 Answer

My radio is on safe mode in my 1999 audi a6. i dont have my code wondering how to get it off safe mode.


Call a BMW Audi, or Jaguar dealer, and give them your vin number they will give you the code, if they want you to bring it in ask them how much they will charge it may be cheaper to get an after market radio and have it installed

Feb 05, 2010 | 1999 Audi A6

1 Answer

Radio safe code needed


You should have been given the radio code for the vehicle when purchased, if not you will have to visit your local audi dealer for them to obtain the code from germany, check your audio handbook to see if the code is in there

Feb 24, 2009 | 1998 Audi A6

2 Answers

1999 audi A6 need radio code please


DO YOU HAVE THE ORIGINAL RADIO MANUAL THAT CAME WITH THE VEHICLE? THE CODE IS PRINTED ON THE CARD IN THE RADIO MANUAL. THAT PAGE ALSO GIVES THE INSTRUCTIONS TO GET RADIO OUT OF "SAFE" MODE.

YOU NEED TO HOLD DOWN THE BUTTONS DESCRIBED IN MANUAL TO GET THE RADIO DISPLAY IN THE CODE ENTRY MODE.

Jan 01, 2009 | 1999 Audi A6

1 Answer

Code radio


THE CODE IS IN THE RADIO MANUAL THAT CAME WITH THE VEHICLE. IT GIVES INSTRUCTIONS HOW TO ENTER THE CODE AND GET RADIO OUT OF "SAFE" MODE

Dec 27, 2008 | 1999 Audi A6

5 Answers

Safe mode in Audi Symphony radio


hold rbds and pscan till you see numbers then use the radio memory buttons to control the number you want to put in after the numbers are put in hold rbds pscan again till u see it says safe and radio works.

Sep 18, 2008 | 2000 Audi A6

Not finding what you are looking for?
1999 Audi A6 Logo

459 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13152 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...