Question about 1995 Chrysler LeBaron

1 Answer

Need to change plugs on chrysler1995 la baron

Are they easy to change, I can see 3 of them are the other three hidden?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert that has over 500 points.

  • Expert
  • 149 Answers

  1. As you have indicated the front side, toward the grill are easily accessable, however the three on the backside or firewall are difficult to reach. They can only be felt not seen. Be sure that you have plenty of time as it will take a while to change them, you will need a
  2. 3/8" ratchet and a universal joint. Take your time and remove them one at a time. I recomend that you also get a set of plug wires as some of them are going to break whenever you remove them. Be sure to check the vacuum hoses when you are finished as it is easy to break or pull them loose.

Posted on Mar 02, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fuel pump located

the pump is located in the gas tank and will have be dropped to gain access to it.

Mar 06, 2014 | Cars & Trucks

1 Answer

Have a 2006 nissan quest that loses power going up a steep hill. by the time i am half way up i'm going from 60mph to 40mph.

You have to remove the upper intake. The back three cylinders probably are not firing under load. You need to get those hidden plugs/wires replaced.

Jan 13, 2012 | 2006 Nissan Quest

1 Answer

I need location of the freeze plugs on a 95 chevey astro van 4..3

There are three on each side of the block and three on the back, between the engine and transmission. The ones you can't see on the sides are hidden by the engine mounts.

Aug 14, 2011 | 1995 Chevrolet Astro

2 Answers

How do I change the spark plugs 95 buick regal w/3.8

the front three are easy, you will have to disconect the engine strut mount and tilt the engine forward to get at the rear three, this is all done by feel at this point

Feb 12, 2011 | 1995 Buick Regal

1 Answer

Where can i find the spark plugs on a 2004 mazda mpv?

Changing the plugs on the 04 MPV is a pain.

The front three plugs are easy to get to - just remove the black plastic cover over the engin block(3 screws) and they're right there (but deeply recessed in the block).

But you have to remove the manifold to get to the back three plugs. and this kinda sucks. you will need a new manifold gasket set also....... I hope this helps

Nov 28, 2010 | 2004 Mazda MPV

1 Answer

Removing a BMW door panel

easy, if it takes you longer than 7 minutes somethings wrong, and most of that time should be looking for tools.
hidden screw behind handle. 3 wires to unhook, courtesy light down below, master control switch plug, and speaker. step 1 unscrew hidden screw, 2) pop all the plastic keepers. 3) twist the handle through the opening without breaking the connection, 4 unhook 3 wires. bingo it's off.

Jul 03, 2010 | 1988 BMW 5 Series

2 Answers

1994 chrysler lee baron fuel pump whining

You might try changing the fuel filter, most likely the fuel pump is going out and will need to be replaced.

May 13, 2010 | 1994 Chrysler LeBaron

1 Answer

How to change 2008 avenger spark plugs?

The plenum needs to be removed from the top of the engine to remove the rear three plugs, it can be a bunch of work if you dont know what you're doing. The front three plugs are easy, i would suggest buying some good plugs so you dont need to change them very often.

Apr 04, 2010 | 2008 Dodge Avenger

Not finding what you are looking for?
1995 Chrysler LeBaron Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers


Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides