Question about 1989 Chevrolet K1500

1 Answer

Chev 1998 pickup brakes and springs diagram

Chev 1998 rear brakes and springs diagram

Posted by on

  • 2 more comments 
  • j_zawaly Mar 02, 2009

    Not me, didn't take them apart for a friend, just clearification on the spring diagram is what he is looking for

  • j_zawaly Mar 02, 2009

    That would be good thanks for the suggestion but both sides were done at the same time, they are mechanics just want to be sure the way the spring system is put back togethre the right way

  • Richard Scordino May 11, 2010

    Diagrams can be found in haynes manuals found at most big parts outlets. Is there a problem or are you just double checking their work?

  • Richard Scordino May 11, 2010

    If you have not taken apart the opposite side you have the best diagram possible right there!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

Looked in the book and confirmed with an online diagram, for the spring positions and proper spring to bracket plate assembly. Thanks for all your help and sugesstions

Posted on Mar 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Chev.S10 brakes making a grinding, roaring noise


THIS SOUNDS TO ME LIKE YOU HAVE BEARINGS THAT ARE BAD. WHEN IT ACTS LIKES BRAKES ARE APPLY ON THERE OWN AND GRINDING,THAT IS THE BEARING LOCKING UP.HAVE CHECKED ASAP

Dec 23, 2014 | 1998 Chevrolet S-10 Pickup

1 Answer

1978 chev motorhome brakes are hard to push down to stop


If they are standard power brakes, check the vacuum booster. The diaphragm may be broken. If it holds a vacuum it's OK. If the brakes run through the power steering pump, make sure the belt is tight and the steering is smooth.

Jun 29, 2014 | 1998 Chevrolet S-10 Pickup

1 Answer

Diagram of 1946 ford rear brake drum how to remove


How to remove front spring pin on rear of 1947 ford pickup .

Nov 21, 2012 | 1984 Ford Tempo

1 Answer

Rear brake diagram for 1996 pontiac sunfire


take both drums off the do one whilst looking at the other in case you forget where that little spring went

Apr 03, 2010 | 1998 Pontiac Sunfire

1 Answer

I need a diagram of the rear brake drum assembly for a 96 dodge ram 1500


i need a diagram drum brake assembly for a 1998 dodge ram 1500 pickup

Sep 26, 2009 | 1996 Dodge Ram

1 Answer

Where doe's that spring go on rear brake drums 1996 chevy truck every thing is at top not at bottom, star wheel adjuster?


there should be several springs. first there are (2) real short springs that hold the shoes to the dust cover/back plate. they go in the center of each shoe. then there is a short spring that goes at the bottom where the adjuster is located. there should be a hole in each shoe. finally there is a long spring that goes at the top where your brake cylinder is and this is what gets attched last after your emergancy brake levers are placed between the shoes .

Apr 17, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

1998 buick skylark rear brake repair diagram


Compare the setup with the way they are arranged on the opposite wheel. I always recommend doing one wheel at a time with drum brakes, that way you can always walk to the other side and see how the springs are arranged.

Mar 23, 2009 | 1998 Buick Skylark

1 Answer

Rear brakes scrubbing on 1998 chevy venture van


Removal Procedure Tools RequiredJ 38400
Caution: Keep fingers away from rear brake shoe springs to prevent fingers from being pinched between spring and shoe web or spring and backing plate.
  1. Remove the brake drum. Refer to Brake Drum Replacement

  2. 142285.gif
    tif.gif
    Notice: Do not over stretch the adjuster spring. Damage can occur if the spring is over stretched.
  3. Use the J 38400 in order remove the adjuster spring (1). Disengage the adjuster spring loop from the tab on the adjuster actuator.
  4. 2.1. Remove the loop end of the adjuster spring from the adjuster actuator. 2.2. Remove the straight end of the adjuster spring from the secondary brake shoe.
    142293.gif
    tif.gif
  5. Use the J 38400 in order to spread the brake shoes apart.
  6. Remove the adjuster.
Installation Procedure

    142293.gif
    tif.gif
  1. Use the J 38400 in order to spread the brake shoes apart.

  2. 178990.gif
    tif.gif
    Important: Ensure that the adjuster (2) engages the brake shoes (4 and 5), the park brake actuator (3), and the adjuster actuator (1) properly.
  3. Install the adjuster.

  4. 142285.gif
    tif.gif
    Notice: Do not over stretch the adjuster spring. Damage can occur if the spring is over stretched.
  5. Install the adjuster spring (1).
  6. 3.1. Install the straight end of the adjuster spring into the secondary brake shoe. 3.2. Install the loop end of the adjuster spring to the adjuster actuator.
  7. Install the brake drum.

Dec 06, 2008 | 1999 Chevrolet Venture

1 Answer

Rear brakes


i need a diagram for drum brake assembly 1998 ford taurus se

Sep 08, 2008 | 1996 Ford Ranger SuperCab

1 Answer

Rear brake diagram


Can I get a diagram of the rear brakes that shows the spring locations for a corsa b

Jul 08, 2008 | 1998 Ford Ranger SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

615 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...