Question about 2003 Ford Windstar

1 Answer

One of the contacts is broken off the passenger

One of the contacts is broken off (the bottom one when looking towards the ground) the passenger side door. It locks and unlocks, but makes a "machine gun sound when you lock it.

Posted by on

  • 2 more comments 
  • FRDFAN Mar 02, 2009

    I am referring to the contacts on the side of the sliding door passenger side



  • FRDFAN Mar 02, 2009

    Would this make the lock sound abnormal when you lock the door?

  • yadayada
    yadayada May 11, 2010

    these can be easily replaced, they make a kit, but u will need a pop rivet gun

  • yadayada
    yadayada May 11, 2010

    contacts for what?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 63,801 Answers

No, that is most likely the lock actuator is defective.

Posted on Mar 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Driver side rear wheel turned toward the passenger side


You need to put the car up on a car lift and inspect for damaged or broken/worn parts.

Jun 20, 2016 | Cars & Trucks

1 Answer

MY DRIVERSIDE HEADLIGHT IS DIMMER THEN THE PASSENGER SIDE


You have a bad GROUND going to the dim light. Either the ground wire is broken, not connected or not making contact at the bulb.

Mar 29, 2014 | Pontiac Grand Am Cars & Trucks

1 Answer

Keeps trying to die when you push the brake or turn on the ac or heat?


sounds like you have a broken ground wire, check passenger side og engine towards back of eng. Should have a groung wire from eng to firewall and ground from firewall to frame, if one of these is broken (rusted through) it will cause the problem you are having because when you apply brakes or turn on heat/ac it takes away ground for eng.

Dec 20, 2012 | 2005 Chevrolet TrailBlazer LS

1 Answer

Bulb has been replaced...tail light and brake lights work on driver's side but only tail lights work on passenger side. when the brake is pushed that light goes completely out.


It sounds like a ground wire problem. Try to trace the ground wire from the passenger side. Look for a broken wire or a corroded ground connection.

Jun 01, 2011 | Toyota Celica Cars & Trucks

1 Answer

How do open the hood when the cable has broken on my 1999 audi a6 quattro?


Under the car:
You will be able to open the hood if you pull off your splash guard and use a long long flat head screwdriver or something like that. You'll see the hood latch in front of the radiator with the cable attached to it at the top near the hood, put it on the drivers side edge of the bottom of the latch and pry to the passenger side, the lever moves from the drivers side to the passengers side, the cable basically pulls the top of it to achieve this. so your doing the same thing on the bottom with the screwdriver.


tdisline_353.jpg
Release the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and replace the safety release mechanism broken cable.

Mar 22, 2011 | 1999 Audi A6

1 Answer

Bonnet cable broke of a4 audi


You will be able to open the hood if you pull off your splash guard and use a long long flat head screwdriver or something like that. You'll see the hood latch in front of the radiator with the cable attached to it at the top near the hood, put it on the drivers side edge of the bottom of the latch and pry to the passenger side, the lever moves from the drivers side to the passengers side, the cable basically pulls the top of it to achieve this. so your doing the same thing on the bottom with the screwdriver.

tdisline_113.jpg
Release the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and replace the safety release mechanism broken cable.

Please do rate my response. Thanks!

Dec 17, 2010 | 2005 Audi A4

1 Answer

The condensation from the AC on my 2003 chrysler town and country van comes back into the passenger side on the floor in the form of water. How can I eliminate this problem?


You need to clear the Drain. It is located on the passenger side firewall toward the bottom. It is normally a piece of tubing bent to face the ground and crimped slightly at the end. Make sure this tube is clear and it should drain to the outside of the vehicle.

Aug 10, 2010 | 2003 Chrysler Town & Country

2 Answers

I need to know where the a/c condensation tube is located. A diagram or picture would be great. Leak coming in on passenger side.


i have one in the yard but its late here and its a raging thunderstorm outside so have a look in front of the firewall at the bottom passenger side first

Aug 10, 2010 | 1998 Honda CR-V

1 Answer

When a/c is on passenger side floor gets wet in my 2003 dodge durango


Check the condensation drain and make sure it is clear and allowing the condensation to drain outside the vehicle. This is normally located on the passenger side Engine compartment firewall area at the bottom. It most often looks like a copper tube that has been bent over at 90 degree angle toward the ground.

Aug 03, 2010 | 2002 Dodge Durango

Not finding what you are looking for?
2003 Ford Windstar Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...