Question about 1989 Ford F 250

2 Answers

I was side tracked on replacing the order for the positionig of the wires and now when i start the vehicle it back fires. even if it was numbered from driver side to passenger side that would help.

Posted by on

  • Rob
    Rob May 11, 2010

    Engine?



    300 6?

    302 V8?



    etc.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

1,3,7,2,6,5,4,8 firring order if its 5.8

Posted on May 21, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Pass. side front to back 1234 driverside front to back 5678 should be a white emission label in the engine bay with the firing order or on top of the intake distributer turns counter clockwise should be #1 on the cap

Posted on Mar 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the number one firing order on the 1996 ford explore 5.0 it has twwo coil packs


Left and right on a vehicle are always referenced as if you where sitting in the drivers seat. Right is always the passenger side, left is always the drivers side.
3_13_2012_8_54_08_pm.gif

Mar 13, 2012 | Cars & Trucks

4 Answers

I need to know what the cylinder # are and what the fireing order is


In the 4 cylinder the firing order is 1,3,4,2 and the cylinders are numbered 1,2,3,4 from the Passenger side to the drivers side.

In a V6 the firing order is 1,6,5,4,3,2 and the cylinders are numbered 1,3,5 in the front from the passenger side to the drivers side and 2,4,6 in the back from the passengers side to the drivers side.

Aug 21, 2011 | 1993 Buick Skylark

1 Answer

Need photos of 1994 suburban firing order


This should be the 350 5.7 V-8...as long as it is a V-8 the firing order is the same for Chevy's...18436572...#1 being drivers side front...use to confirm #1 on distributor cap...recommend you change one wire at a time...:) passenger side starts with #2 in front...even #s on passenger side...odd numbers front to back on drivers side...1,3,5,7...passenger side ...2,4,6,8...:)

Dec 13, 2010 | 1994 Chevrolet Suburban

2 Answers

89 dodge pick up.. 318 firing order. # 1 not shown on cap. pic of firing order helpful. thanks


number one piston it the first cylinder at the frount of the engine block,,,,,allways! on any engine,,,

Aug 21, 2010 | 1980 Chrysler Cordoba

2 Answers

I took of*** my spark plug wires working on my small block 350 pickup and I don't remember the the firing order to put the new wires back on. Is there a diagram anywhere or is it even that difficult to...


Next time number each lead before you remove it and no. the dissy cap as well

The firing order, which should be cast into the intake manifold, for the chevy small block V8 is 1-8-4-3-6-5-7-2. The firing order is the numerical sequence in which the spark plugs are fired. The insertion position of each spark plug wire around the circumference of the distributor cap can be found according to a clock face. The insertion sequence determines the firing order. The firing order is followed clockwise around the distributor cap starting from the 6:30 position with the 6:30 position being the number one cylinder spark plug wire.
On classic chevy small block engines that use ignition breaker points instead of electronic ignitions, the number one cylinder is the one immediately clockwise of the small metal sash cover on the distributor cap. The firing order starts here. There is no sash cover on the distributor cap for GM HEI electronic ignitions, and the firing order is the same, but starting at the 5:30 position.
The firing order makes sense if you know how the cylinders are numbered. The number one cylinder is the front most on the drivers side and 2 being the front most on the passenger side. From front to back, the cylinders are odd numbered on the drivers side, and even numbered on the passenger side.
See the diagram; Click to open a printable larger image in a new window. The firing order starts with the number one cylinder. We would connect the number one spark plug wire to the distributor cap terminal in the 6:30 position. distributor.pngSince the next cylinder in the firing order is 8 (passenger side rear), we connect the number 8 spark plug wire to the next distributor cap terminal (approximately 7:30 position) in the clockwise direction from number one. You need to be sure you continue the firing order in the clockwise direction around the chevy small block distributor cap from the last installed spark plug wire. Setting the rest of the firing order is just a matter of repetition. Be sure to count the spark plugs from front to back on each side of the motor to identify the correct cylinder number in the firing order.

Jun 21, 2010 | Cars & Trucks

1 Answer

I didnt understan the response regarding spark plug wiring arrangements in escort 98 for which i got this answer (Firing order 1-3-4-2 --- | 1 | front | | | 2 | of | | | 3 | vehicle | | | 4 | --- --- coil...


WELL I SEE TWO DIFFERENT 2.0 ENGINES ONE IS VIN P THE OTHER IS VIN 3. BUT THE FIRING ORDER IS THE SAME 1 3 4 2 .STANDING IN FRONT OF VECHICLE LEFT TO RIGHT. 1 2 3 4. THAT THE CYLINDERS ORDER.NOW I AM LOOKING AT 2 DIFFERENT SET UP FOR PLUGS WIRES ON COIL PACK.GET A SHEET OF PAPER. WRITE THESE FOUR NUMBER DOWN.THAT WILL BE PLUG NUMBER TO THAT CYLINDER.TAKE A PIECE OF PAPER WRITE NUMBER 3 UPPER LEFT 4 BOTTOM LEFT 2 UPPER RIGHT 1 LOWER LEFT.HOLDING PIECE PAPERSTANDING IN FRONT OF ENGINE THIS IS YOUR PLUG WIRES TO COILS THEN YOU MATCH THEM TO THE CYLINDER NUMBERS.THAT WAS THE 2.0 VIN P ENGINE.NOW FOR THE VIN 3 ENGINE.TAKE ANOTHER PIECE OF PAPER WRITE NUMBERS DOWN. NUMBER 1 UPPER LEFT 4 BOTTOM LEFT 3 UPPER RIGHT 2 BOTTOM RIGHT.STANDING IN FRONT OF VECHICLE MATCH NUMBERS FROM BOTH PAPERS TO COILS THEN TO THE CYLINDERS .THIS SHOULD GET YOU BACK ON TRACK.LET ME KNOW IF YOU HAVE TROUBLE.

Apr 15, 2010 | 1998 Ford Escort

2 Answers

Need firing order and, I need to know what side the number one piston is on?


To avoid confusion, remove and tag the spark plug wires one at a time, for replacement.

The 3.5L (VIN H) engine's unique ignition system has the ignition coils directly over each plug. No spark plug wires are used.
If a coil is replaced on any of the 3.1L, 3.4L or 3.8L engines, it may not be numbered, as is the factory coil. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your guide to reflect how your engine is wired.

f6067f3.jpg

Fig. 3.1L (VIN M) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System

0726c45.jpg

Fig. 3.4L (VIN X) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System

0476e1c.jpg

Fig. 3.4L (VIN E) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System

174502a.jpg

Fig. 3.5L (VIN H) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System

69d9a4f.jpg

Fig. 3.8L (VIN 1) engine Firing order: 1-6-5-4-3-2 Distributorless Ignition System

806db5e.jpg

Fig. 3.8L (VIN K) engine Firing order: 1-6-5-4-3-2 Distributorless Ignition System

The firing order for the 3.1L VIN M, 3.4L VIN E, 3.4L VIN X and 3.5L VIN H engines is 1-2-3-4-5-6. The right bank cylinders are on the cowl side (rear) of the engine compartment and are numbered 1,3,5, left bank cylinders on the front side of the vehicle, are numbered 2,4,6.
The firing order for the 3.8L VIN K and 3.8L VIN 1 engines is 1-6-5-4-3-2. Starting at the front of the engine, cylinders in the left bank are numbered 1,3,5 and cylinders in the right bank are numbered 2,4,6

Hope helped (remember rated this help) Good luck.


Oct 19, 2009 | Pontiac Grand Prix Cars & Trucks

1 Answer

I replaced my spark plug wires on my 1996 chevy truck. may have crossed one,need a diagram from the spark plugs to the distributer cap.


Since you didn't state whether it is a V6 or V8, I'll give you both.

V6 -4.3Liter
Firing Order is 1-6-5-4-3-2
Distributor rotor turns Clockwise
Number 1 spark plug tower on distributor cap, faces the front of the engine.

->Drivers side, spark plug order in engine, starting from the Front going back:
1-3-5
->Passenger side, spark plug order in engine,
starting from the Front going back:
2-4-6

If it's Electronic, the distributor cap has a Left side, (Drivers side), and a Right side, (Passenger side)
Starting from the Front, going back on the Left side,
3-1-5
Starting from the Front going back on the Right side,
2-4-6

V8-5.0, 5.7, and 7.4Liter
Firing Order is 1-8-4-3-6-5-7-2
Distributor rotor turns Clockwise
Number 1 spark plug tower on distributor cap,
faces Front, towards the Drivers side.

Electronic distributor cap has two sides. Drivers, (Left), side and Passenger, (Right), side.
Starting from Front going back on Drivers side,
1-7-3-5
Starting from Front going back on Passenger side,
8-2-4-6

Spark plug order in engine, starting from Front going back, Drivers side:
1-3-5-7
Spark plug order in engine, starting from Front going back, Passenger side:
2-4-6-8

Aug 28, 2009 | 1996 Chevrolet K1500

2 Answers

Pasenger side isnt firing with new plugs and wires


Recheck the rotor position and spark plug wiring for correct positions for starters. camshaft sensor?
-------------------
You need to bump the starter over till you get the timing mark up on the front of the harmonic balancer to line up with the - O degree, Top Dead Center mark (TDC) first. With the Distributor cap off the distributor so you can see the Rotor. The rotor will rotate almost to the front pointing at the back of the throttle body of the EFI. You need to mark the distributor cap , once you get it on ZERO, to mark it as number one, on the post bulge on the cap that the rotor points to. this is the post we start with in putting the wires back on in sequence. This puts the wires back on the cap according to the firing order you see on the intake manifold. The rotation of the rotor you see...as you bump the started over, tells you how the wires...in sequence go around the cap...the firing order from number 1 goes in that direction. Remember on the vehicle ..the odd numbered cylinders are on the drivers side...Number one at the front ..then 3, 5, 7 to the back. All the even cylinders are passanger side 2 at the front ..then 4, 6, 8 in order to the back. You really need to tab the wires at the Cap End... as to which one is which cylinder. Use a piece of masking tape make a flag tab folded around the wire so you can easily see its number. Then run your sequence of firing order puting the wires to the cap in that order. This assumes you still have the wires on the right sparkplug....if you pulled the wires off the Cap and the sparkplugs...its OK..just mark which ones fit to the cylinder...one at a time...and tab it the same number on each end first. Post back if you are lost...tell me what has been removed...and what you left hooked up the same as it was BEFORE you started. It will go back together...and run . If you pulled out the distributor base then we need to talk.
please do rate the solution.

Apr 03, 2009 | 2000 GMC Jimmy

3 Answers

4.3 L vortec firing orcer and wiring diagram


you need the firing order?? it is 1, 6, 5, 4, 3, 2 clockwise. Number one on cap is forward position, or 6 o'clock position, just left of the hold down bolt.

Jan 22, 2009 | 1995 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63572 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...