Question about 2007 Chevrolet Silverado 2500HD

1 Answer

Block Heater plug...

Can not locate the Block heater plug on my 2003 GM 2500 diesel.
We have searched everywhere.
Seems everyone I talk to can find theirs either.
HELP... !!

Posted by on

  • veramayn Mar 02, 2009

    Hubby just went out to look again after reading some of the solutions on here. The truck was sold in Chatham ON Canada so it should have a plug I would think. We have some cold weather here and my truck did not like the bitter cold this year.
    If there is no plug I guess I will just have to deal with the hard starts on the cold mornings.


  • yadayada
    yadayada May 11, 2010

    Are u sure that it has one? not all came with one, it depends on the climate jone the truck was sold new in.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 70,365 Answers

U can have a heater installed for around $150 US

Posted on Mar 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the connector located for my heat knock sensor


Confused on your question. If you are looking for the plug for your block heater, it should be on the drivers side of the block,towards the front of the engine. But keep in mind that a block heater is an option and not all trucks, especially non diesels, will have one. If you are looking for the knock sensor connectors, there are 2 of them and they are under the intake manifold. It will have to be removed to get to them.

Jan 24, 2017 | Cars & Trucks

1 Answer

Where is the engine block heater plug-in on 2008 Navigator


-Are you talking about diesel engine...? If so. Check with its manual.

Good luck

Mai

Mar 02, 2014 | 2008 Lincoln Navigator

1 Answer

Where are the glow plug relays located on a 2001 dodge 2500 diesel cummings motor


There arent any glow plugs, there is an intake heater in the manifold, there are 2 relays under driver side battery that warms the heater (when wait to start light is on) for starting.

Sep 08, 2010 | 2001 Dodge Ram 2500 Truck

1 Answer

Engine stalls while driving and you have to sit for a while then it will start, but only if the wait to start light comes on, if no light it will not start. only seems to happen in the winter months.


I assume this is a diesel? May be your glow plugs not all working,or temp senser that controls the cycling of the plugs,or you glow plug timer.I am not sure if this year has a fuel heater in the fuel heater block.

Jan 20, 2010 | 1996 Chevrolet C/K 2500

1 Answer

2003 Dodge Ram 2500 Diesel. October I noticed


Replace heater hoses, Sometimes the inner lining of hose forms pockets that plugs flow of fluid.

Jan 13, 2010 | 2004 Dodge Ram 2500

1 Answer

Where do you plug in a2003 chevy 2500 diesel when it is going to be cold


If you have a block heater, there will be an extension cord type plug somewhere near or under the front grille (sometimes you need to find the heater and follow the wire to find wherever it got tucked in) That gets plugged into an extension cord from the house power.

Jan 09, 2010 | 2003 Chevrolet Silverado 2500HD

1 Answer

2003 duramax 2500 i need to know the location of the cord for the block heater


If it has the block heater, the heater is located on the drivers side center of engine block. You should be able to crawl underneath, and see where the heater is put in place of a freeze plug, and just follow the wires up.. Usually tucked in along the fender somewhere..

Dec 10, 2009 | 2007 Chevrolet Silverado 2500HD

4 Answers

Wabasto quit cant find block heater on 2001 2500 cummins wont start too cold


small paraffin stove under the engine will help start it,but i have no idea where the heater is on the block ,i would imagine its fitted into a core plug hole about half way up the block but what side ??

Dec 07, 2009 | 2001 Dodge Ram 2500 Truck

4 Answers

Location of block heater cord on my 2003 chevy silverado


MIne was on the passenger side inside the wire loom next to the shock. You can get to it through the fender well. It just looked like a ball of tape and only the plug itself was exposed with the rest of it doubled back on itself inside the loom. It was actually long enough to stick out of the front of the truck.

Dec 15, 2008 | 2007 Chevrolet Silverado 2500HD

Not finding what you are looking for?
2007 Chevrolet Silverado 2500HD Logo

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...