Question about 2002 Chevrolet Tracker

2 Answers

I have a 02 chevy tracker and have replaced both belts and the vechile still squeals when i turn on the ac.

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

Check the fan belt for tightness.It's a small belt and to tighten it you need to looesen two bolts. Actually the complete fan unit will move . It tales about 10 min to do this and you need a long bar to get leverage on it, then tighten the bolts.Mine squeels when loose or high humidity.
The dealer charged me $40.00 to do this and while at another garage it took a few nim. and no charge and the mechanic told me what to do.

Posted on Jul 02, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 137 Answers

If belt is tensioned to spec.
and the belt is new.
then the pump is seized.

Posted on May 01, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 1999 Chevy Tracker I have had to replace my belt on my car 3 times within a week why does it keep breaking I had my alternator checked and it's good

How To Install Replace Serpentine Belt Chevy Malibu 97-03 ...

? 9:28
Sep 23, 2011 - Uploaded by 1A Auto Parts This video is applicable to 97, 98, 99, 00, 01, 02, and 03 Chevy Malibu belt broke and quoted by a friend that works at a shop said it would ...

Sep 19, 2015 | Cars & Trucks

1 Answer

How do you get tension off ac belt on a 2001 Chevy tracker

How-To Replace The Serpentine Belt On A Chevy Tracker ...

? 1:22
Oct 28, 2014 - Uploaded by Deo Ole
How-To Replace The Serpentine Belt On A Chevy Tracker ...2001 Chevy Tracker V6 2.5L Head Instal and Timing Chain Instal - Duration: ... XL 7 2.7L Air conditioning compressor removal and smaller belt installed - Duration:

Aug 23, 2015 | AC Cars & Trucks

1 Answer

Chevy tracker serpentine belt

you need to check to make sure its on the grooves on all the pulleys that have them. possible you missed a washer behind one of the pulleys maybe??

Jul 12, 2017 | Cars & Trucks

1 Answer

If my ac compressor or ac belt is going out in my chevy tahoe (2003) will the engine make a rumbling sound when you only turn the ac on and will there be a squeal when you turn the ac on and accelerate the...

sounds like the belt needs tightening or replacing so yes you are indeed correct about the squeal, as for the rumble depends on how bad the rumble is but it shouldnt be caused by either you mentioned.

Jun 20, 2010 | 2003 Chevrolet Tahoe

1 Answer

I need a serpentine belt/routing diagram 2000 chevy tracker.

For the 2000 Chevrolet Tracker:

Most modern vehicles have the Belt Routing Diagrams on the undeside of the Hood. But the sometimes disappear.

I do not know if you have the 1.6L In-Line 4-Cylinder, or the 2.0L DOHC In-Line 4-Cylinder. Nor what Engine Options you have (AC/No AC, etc.).

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at!

Mar 27, 2010 | 2000 Chevrolet Tracker

3 Answers

Can't get A/C belt around pulleys on my 01 Chevy Tracker 2.5 V6

The belt typically won't squeal when too tight, it will just put more wear and tear on the components. I would recommend removing the belt, and cleaning the pulley with brake parts cleaner and a tooth brush. There is probably some sort of residue on the pulley, which is allowing the belt to slip when the a/c clutch engages. If this doesn't help, make sure all of your pulleys are aligned. Use a long straight edge to check their alignment with each other. If they aren't close to perfectly straight, it will cause the belt to ride funny and squeal when the a/c clutch engages.

May 28, 2009 | 2001 Chevrolet Tracker

Not finding what you are looking for?
2002 Chevrolet Tracker Logo

446 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides