Question about 2003 Land Rover Discovery

1 Answer

Cant start dont take ekc what now

My disco wont start have the emergency key code does not wor or i am puting it in wrong . i think my code is off

Posted by on

  • Alex Threlfall May 11, 2010

    Is it a TD5 or a V8? Do you hear a click?

  • yadayada
    yadayada May 11, 2010

    not sure what you're talking about here?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 149 Answers

Have you followed the instructions with regards the EKA code?
You have to enter the code, then you should hear a noise, two chirps is correct code, one is incorrect. You then have to wait 5 minutes till the dash light stops flashing. You then have a 30 second window to open the door and start the vehicle before the engine is immobilised. Do not open the car during the 5 minute window. It's detailed in the manual btw.

Posted on Feb 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Something wrong with my ignition what could be wrong


sounds like the ignition key switch is worn and needs replacing.

Sep 07, 2014 | 1997 Mitsubishi Galant

1 Answer

Turn off factory alarm


Not sure on this one, unless the switch is not connected to the drivers door handle. On a Dodge you disable the alarm by unlocking the drivers door with the key.

Apr 24, 2013 | Dodge Ram 2500 Cars & Trucks

1 Answer

Just got the spark plugs changed and it started idling low and puting?


sounds like a wire is crossed, not making good contact, or plugs are gapped wrong...check all your wire connections..did this help?

Feb 14, 2012 | 2000 Oldsmobile Alero

1 Answer

Fail message when I try to use the emergency code


you will have to take the vehicle to someone with the capabilities to reprogram the keys to the vehicle either a vw dealer or someone who has vagcom it is the only way there is no shortcut or bypass to program the keys you need a scantool for vw

Aug 29, 2009 | 2003 Volkswagen Jetta TDI

2 Answers

1998 Disco-Unable to remove key from ignition.


If disco is automatic move the transfer lever from high to low box and back again firmly then the key will come out there is a safety feature on the autos to prevent the key being removed if the transfer box is not in either high or low correctly with most dicso;s the transfer shift lever is stiff. through lack of use .once it is pushed in properly the key will release it works every time and I have had four v8 autos
basically you cant remove the key because even though the gearbox is in park if the transfer gears are not fully home the park sensor on the gearbox thinks it is out of gear eg not in park so wont let you remove the key and leave the car out of gear in case it rolls away .Dan

Jun 30, 2009 | 1998 Land Rover Discovery

2 Answers

Theift light is on and wont start for 10 min


just unhook your battery cables for about 2 minutes......this should reset it....

Jun 13, 2009 | 1997 Chevrolet Cavalier

1 Answer

Wont start after changing the alternator, battery, and MAF sensor


Sometimes the alarm thinks the pos. battery cable has been cut so it kills the ighition. You will have to look in the manual to see how to reset the alarm. You may need a code. If its not the alarm, you may have blown a fuse or worse, fried the computer when you put the alt. in. start at the begining. Check the battery cable connections, battery voltage, alt. wires and connections. if the headlighys work but the car won't start, it's prob. not a "connection" problem.

May 19, 2009 | 2003 Toyota Matrix

1 Answer

Parking brake light keeps blinking, 4 blink code?


make sure emergency brake pedal is pulled all the way up

May 06, 2009 | 1992 GMC Sonoma

1 Answer

Ekc on land rover disco 2 v8


Well, you may not need to take it to a dealer if you have the EKA code.
Firstly, pop a new battery in the fob. Get the vehicles battery charged up or changed.
Now we can enter the EKA.
Close all the doors.
Turn the key in the driver door lock to the unlock position and hold there for at least 5 seconds until the alarm sounds once. Then return to centre - always ensure you return to centre and do not delay more than 10 seconds between turns, or hold in the position for more than 5 seconds or you will reset to the start. Turn to full extent of travel.
1st Digit turn to unlock the number of times specified.
2nd Digit turn to lock the number of times specified.
3rd Digit turn to unlock the number of times specified.
4th Digit turn to lock the number of times specified.
Finally turn to unlock once more. If it is correct a double bleep will sound (single bleep is incorrect code)
You now have a 5 minute delay - don't open any doors. The anti-theft indicator will continue flashing once every 2 seconds for the five minute period. When this goes out, open the door and start within 30secs.
After 3 failed attempts, the security system invokes a delay period of 10 mins during which the system will not accept any further attempts to enter a code.

Mar 02, 2009 | 2003 Land Rover Discovery

Not finding what you are looking for?
2003 Land Rover Discovery Logo

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...