Question about 1986 Chevrolet S-10 Blazer
A good friend of mine has a Chevy Blazer 86 and he was replacing his wheel barrings and after taking it off he is having trouble getting it back on due to the gears for the 4-wheel drive. Have any suggestions
Hi there. If by gears you mean the splines on the end of the half shaft, you need to seperate the lower ball joint, if not done already, put the splines in the hub first and then hook the new bearing hub up to the lower control(ball joint) with the shaft already in place.
Posted on Mar 15, 2009
Tips for a great answer:
Oct 24, 2012 | 2001 Chevrolet Chevrolet Blazer
Jun 02, 2012 | 1999 Chevrolet Blazer
Aug 11, 2011 | 2003 Chevrolet Blazer
Oct 30, 2010 | 1994 Chevrolet S-10 Blazer
Oct 07, 2009 | 2000 Chevrolet Blazer
Jun 02, 2009 | 1986 Chevrolet S-10 Blazer
Mar 22, 2009 | 1986 Chevrolet S-10 Blazer
Mar 10, 2009 | 1996 Chevrolet Blazer
233 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: