Question about 1999 Ford Ranger SuperCab

1 Answer

How do i change air filter in 99 ford ranger, 4.0?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Ford Master
  • 783 Answers

Remove the air tube from the MAF sensor,then disengage the 2 snap claps by pulling up on them.Lift the cover off of the bax and replace the filter.

Posted on Mar 02, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Solonoid location on a 1999 ford ranger 4x4, 3.0 engine

    images for Solenoid location on a 1999 ford ranger 4x4 ...

    More images for Solenoid location on a 1999 ford ranger 4x4, 3.0 engine

    5R55E shift solenoids. - Ford Explorer and Ranger Forums "Serious ...

    Feb 19, 2011 - 19 posts - ‎6 authors
    I need to change shift solenoid 3, but don't know which one it is. O/D light ... 2001Ford Explorer Sport 4.0 sohc engine. ... The sticky thread called the 5R55E valve body rebuild diary has a diagram of the valve body with the solenoids. ... I have a 98 Ranger with the 3.0L. .... I have a 99 xlt 4x4 4.0l VIN X. Finally changed EPC solenoid...results
    19 posts
    Jul 6, 2008
    4R55E (or 4R44E) Solenoid Location?
    12 posts
    Nov 2, 2007
    How to: IAC valve cleaning thread (w/pics)
    19 posts
    Oct 29, 2007
    Fuse and relay locations--2nd generation power ...
    19 posts
    Mar 2, 2007
    More results from

Jan 01, 2016 | 1999 Ford Ranger SuperCab

1 Answer

How do I change the cabin filter in my Ford Ranger xlt 2011

Check with your Ford dealer. As far as I know Ranger was normally not equipped/supplied with a Cabin Air Filter.

Dec 21, 2014 | 2011 Ford Ranger XLT

1 Answer

We changed the fuel pump in our 98 Ranger and can't get it to run

disconnect the line to the fuel filter inlet an bleed the air out. have 4 gallons at least in the tank as well so it primes correctly

Feb 06, 2010 | 1998 Ford Ranger SuperCab

1 Answer

2002 6 cylinder 3.o engine Ford Ranger. Cold start problem. Bank 1 code PO172 and Bank 2 code PO175. System to rich. Where to start checking.

Changed the air filter lately? Possibly defective O2 sensors, but I doubt it. If air filter and intake are clear, I'd check barometric pressure sensor and mass air flow sensors. Get a Haynes or Chilton's for $25 at Pep Boys for instructions on testing these componenets

Oct 14, 2009 | 2002 Ford Ranger Regular Cab

1 Answer

Misfire on 4, 5 & 6

Take your time, if its been awhile do a complete tune-up. and preliminary check a misfire can come from a defective cap and rotor, fuel and air filter. a leak in the fuel system or defective regulator.

Apr 28, 2009 | 1998 Ford Ranger SuperCab

1 Answer

99 Ford Ranger xlt 4x4 The 4 wheel drive won't always kick in Looks like the electrics are working but the hubs just won't always kick in.

I had the same problem w/ my 99. If you have auto hubs, they work off a vacuum pump which is located under your air filter box..check to make sure it is that is working it's on to the hubs..the locking hubs are the black caps in the center of each from wheel..they snap on and off..hard to take off without breaking a few tabs..the seal one or both may not be holding the vacuum created by the motor under the airfilter box. if one of the hubs has a vacuum leak neither side will work, it's all or nothing..aside from the electric parts on the dash and side of transmition that's about everything there is to know about 1999 ranger four wheel system.

Mar 18, 2009 | 1999 Ford Ranger SuperCab

1 Answer

Recommended service at 60,000 miles??

Hello at 60,000 miles you should have all of the following done.
1) Have you transmission flushed completely
2) change your fuel filter
3) oil and filter change
4) inspect your brakes and rotate your tires
5) replace air filter if needed
6) clean your injectors by pressure
7) have your suspension check
8) have your belts inspected
9) if your differential is not leaking. leave it alone due to age.
10 have your coolant flushed out.

If you had any of the following done recently then subtract from the list.
this may be costly so you may want to do little by little unless you can have it done all at once.

Dec 06, 2008 | 2000 Ford Ranger SuperCab

Not finding what you are looking for?
1999 Ford Ranger SuperCab Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers


Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides