Question about Daewoo Lanos

1 Answer

Everytime I step on the brakes the passenger side rear tail light goes off and the light are dim.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Thiers a bad erth some were in rear light

Posted on Mar 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 Mercury Milan LED tail light out


Yes, I have a 2011 Milan as well and both sides of mine went out. One last year (2013) and the other side recently. My car is no longer under warranty and the dealer said they it would be $417 to repair. Ford needs to fix this issue because from what I have been reading it is a common problem and it is a safety issue!

Nov 05, 2012 | 2010 Mercury Milan

1 Answer

No turn signals, 1 driver brake light bad, ABS light on. 2002/2003 CVPI


Sounds like you have 'ground' issues. Apply the brakes using a broom stick or more apropriate tool so that the brake lights are activated. Then go to the brake light that is not bright enough. using a test-light with a sharp pointed probe, poke the ground wire close to the bulb (usually a black wire) make sure the test light is attached to a grounded bolt. if the brake light gets brighter with ground added, you need a new ground wire. Splice it in to the existing wire & attach it to a bolt. Lights should work better with proper ground. (each bulb has a positive post & neg. post, don't add ground to the side with power coming through it from Battery (+)(red light on test light) - probe wires FIRST with test light to find (+) POS. Hot wire, and leave that one alone.

Aug 09, 2012 | 2003 Ford Crown Victoria

1 Answer

Headlight switch on makes tail light dim


there must be a short circuit which powers tail lights and brake lights. probably you have a dual filament bulbs which have both brake and tail light together. check for bulb, socket/or bulb housing and harness of that light.

Nov 19, 2011 | Cars & Trucks

1 Answer

I would like a diagram of the 740 gle 1990 tail light wiring, I cannot seem to get them working correctly


You don't really need a diagram, it's simple. If you open both tail light boxes in the trunk you will see at the connector on the bottom a yellow wire in the first position. That goes to the brake bulb. If both tail lights do not work, make sure you are getting power to the driver side light first, if it is not getting power, the passenger side will not work either, they are in line with each other. If it is only the passenger side not working, the bridging wire could be bad.. try jumping it. Also, make sure you are getting power inside the tail light bulb holder. The metal connections can come loose. If there is no power to the driver side tail light it could be the bulb failure relay, that is the round red relay in the rear left side of the fuse box behind the ash tray/ cigarette lighter below the radio in front of the shifter. You should be getting power to the third brake light in the rear window...that is a different circuit and will not be affected. Try changing out the bulb failure relay, it supplies the power to the tail lights.

Jun 22, 2011 | 1990 Volvo 740

1 Answer

Bulb has been replaced...tail light and brake lights work on driver's side but only tail lights work on passenger side. when the brake is pushed that light goes completely out.


It sounds like a ground wire problem. Try to trace the ground wire from the passenger side. Look for a broken wire or a corroded ground connection.

Jun 01, 2011 | Toyota Celica Cars & Trucks

2 Answers

My criveer side tail light is dim and when i press


prolly the tail light circuit its a a flat small circuit made into the rear taillight looks almost like a computer board, that is prolly burned out but b4 you do that pull the tail light out and look and see if the ground wire is broken or coroded

Nov 01, 2009 | 2000 GMC Sonoma Extended Cab

1 Answer

2006 Ford Ranger. Rear passenger side tail light


Bad earth connection.Clean or replce wire.

Jun 18, 2009 | 2004 Ford Ranger

1 Answer

Head light and tail light wont work


the headlight switch may have a short in it. replace switch and try again.

Feb 27, 2009 | 2003 Ford Windstar

1 Answer

Passenger side tail lamp


could be the socket where you put the bulb or the wire that goes to the socket. there could be no power going to the wire.

tnx 4 using fixya,

drcool

Oct 14, 2008 | 1999 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...