Question about 1999 Ford Windstar

1 Answer

I need the location of anti-theft module on 1999 ford windstar please HELP ME.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 783 Answers

It is behind the glove box. It is also a programable module so if you are replacing it it has to be programed.

Posted on Mar 02, 2009

2 Suggested Answers

emissionwiz
  • 64034 Answers

SOURCE: EXACT LOCATION AND DESCRIPTION OF THE ANTI THEFT

there is no separate anti theft module, it is part of the PCM which is the main computer in the van that runs the engine and emission system as well as the PATS (Passive Anti Theft)

Tell me your problem and perhaps I can give u and answer, I am a Ford Factory Technician.

Posted on Mar 02, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot get the Pats system on a 1999 Ford Taurus to reset to learn a new remote fob. What could be the problem.


Ford Passive Anti-theft System (PATS) - KCSS ...

https://kcss-transportation-technology.wikispaces.com/share/.../61579706
The passive anti-theft system (PATS) uses radio frequency identification .... This hasreset instructions when you get to the point where she turns over but won't ... Took the truck to a Ford dealer and they recommended replacing the ... http://www.f150forum.com/f6/1999-f150-4-6-wont-start-anti-theft-light-flashing-129601/Missing: learn

Reference: - Ford Anti-Theft (PATS) ' FordForumsOnline.com

www.fordforumsonline.com > Ford Tech Forums > Sound & Security

Oct 26, 2010 - 16 posts - ‎3 authors
Ford SecuriLock Overview PATS is a vehicle security feature ... be noted that PATS is not your Remote Keyless Entry (Key Fob). ... The PATS Control Modules flashes the "Theft" lamp to show system ... keys are currently qualified for the 2000/1Taurus/Sable, 2001 Windstar, ..... 1999 Taurus DOHC 145,000.Missing: learn

Reprogramming procedure for Mercury, Ford and Lincoln ...

www.autorepairinstructions.com/?p=171

Jan 14, 2016 | Ford Cars & Trucks

1 Answer

Anti theft light blinkink with key off and when key is turned, engine rotes but will not start


try locking and unlocking the pass side door with the key suppose to deactivate it

Feb 26, 2013 | 1999 Ford Windstar

1 Answer

1999 ford windstar won't start due to anti theft malfunction stranded with kids HELP


sometimes just by turning the key in driver side door will disable the sysytem.

Oct 02, 2010 | 1999 Ford Windstar

1 Answer

How do I reset the anti- theft computer in a 1999 Ford Windstar, 3.0 L.? Cranks but no start. Scanner says vehicle anti-theft engine disabled.


did you try to remove both battery cables for about 10 min or so ?? that may reset the comp and clear the problem

Aug 05, 2010 | 1999 Ford Windstar

1 Answer

I would like to disarm anti-theft system


On my 1998 Exlorer Sport there is a set of 5 wires in a yellow sheath running from the ignition module to a brown connection point/harness in a very uncomfortable position directly under the steering column above the pedals.

I unplugged the connection at this point. This stopped the key-in-ignition chiming (part of the anti-theft feature) but I still get the chime alerts for headlights left on, initial chime when the key is turned. The pinging, or ringing chime comes from the multifunction computer located under the dash behind the radio.

Hope this help.

Apr 06, 2010 | 2000 Ford Windstar

1 Answer

VEHICLE WONT START


Section 13-11: Anti-Theft System, Active 1998 Windstar Workshop Manual DESCRIPTION AND OPERATION Anti-Theft Alarm System NOTE: The system immediately monitors the ignition key lock cylinder upon removal of the key from the ignition. It is not necessary to arm the system for ignition key lock monitoring.

The anti-theft alarm system:
  • protects the vehicle from unauthorized entry into the passenger compartment, engine compartment and cargo area.
  • monitors the status of the ignition key lock cylinder.
  • is controlled by a remote anti-theft personality (RAP) module. The remote anti-theft personality module also controls the electronic door lock functions. Refer to Section 01-14B for more details.
  • when armed, detects unauthorized entry into the passenger compartment by using an input from the GEM module regarding the state of the door or liftgate (open or closed).
  • protects the engine compartment with a hood switch which is located on the LH cowl vent panel and is part of windshield wiper motor wiring (17A477) .
  • triggers an alarm if the ignition lock cylinder is forcibly removed from the steering column.
Once triggered, the system responds by:
  • flashing the low beam headlamps, the parklamps, rear lamps and the alarm indicator warning light emitting diode (LED).
  • sounding the horn (13832).
  • disabling the starter circuit until the system is disarmed.
---------------------------------------------------------------------------------------------
Remote Anti-Theft Personality Module
  • The remote anti-theft personality module is located behind the instrument panel (04320).
  • It contains a radio receiver that receives the RF signal from the keyless entry remote transmitter (15K601) through the alarm and lock system antenna (15603) and sends the appropriate command to the power door locks, the horn relay, or the generic electronic module.
  • The remote anti-theft personality module is equipped with an internal backup power supply which holds the programmed code in memory in the event the vehicle battery is disconnected.
-------------------------------------------------------------------------------
Remote Anti-Theft Personality Module Removal
  1. Disconnect battery ground cable (14301). Refer to Section 14-01 .
  1. Remove radio. Refer to Section 15-01 .
  1. Remove lower instrument panel center finish panel. Refer to Section 01-12 .
  1. Lower glove box.
  1. Remove two remote anti-theft personality module bracket retaining screws.
  1. Disconnect electrical connectors and alarm and lock system antenna (15603).
  1. Remove remote anti-theft personality module and bracket.
  1. Remove remote anti-theft personality module from mounting bracket.
Installation
  1. To install, follow removal procedure in reverse order.
  1. Tighten remote anti-theft personality module bracket retaining screws to 6-8 Nm (54-70 lb-in).

    34bdf35.gif
Components The system is composed of the following components:
  • remote anti-theft personality (RAP) module with integral antenna
  • alarm indicator LED
  • door lock cylinder switch RH, door lock cylinder switch LH
  • liftgate door lock cylinder switch (220A40)
  • hood switch (part of windshield wiper motor wiring (17A477))
  • ignition lock anti-theft switch (19A438)
The following vehicle components are also used by the anti-theft alarm system:
  • generic electronic module
  • power door lock switch (14028)
  • door open warning lamp switch (14018)
  • autolamp relay (14N089)
  • horn relay and bracket (13853) and horn (13832)
  • low beam headlamps
  • rear lamps (13404) and parking lamps (13200)
  • starter relay
  • door lock relays
  • keyless entry remote transmitter (15K601)
--------------------------------
Disarming an Untriggered System NOTE: A perimeter alarm will "shut off" after 165 seconds, but the system is still triggered and is not disarmed.

An armed but untriggered perimeter anti-theft system can be disarmed by one of the following four events:
  1. Unlock the doors by pressing the keyless entry remote transmitter (15K601) UNLOCK button once.
  2. Unlock any door with a key.
  3. Turn ignition switch to RUN or ACC.
  4. The remote entry PANIC button will disarm the anti-theft system only when the perimeter alarm is triggered and sounding.
------------------------------------------------
System Triggering NOTE: Although the remote entry PANIC alarm is not associated with the monitoring of the vehicle, the user will frequently say that the theft system was triggered when actually the keyless entry remote transmitter PANIC button was inadvertently pressed. A panic alarm will not flash the THEFT indicator.

The alarm can be triggered by the following events if the system has been armed and has not been disarmed first:
  • Open any door or liftgate.
  • Open the hood (16612) (if the hood was open when the system was armed, it must be closed before it can trigger the alarm).
  • Dislodge the ignition key lock cylinder.
  • The anti-theft system may be triggered inadvertently when the module is disconnected and then reconnected. To avoid inadvertent alarm triggering, disconnect the smaller 22-way connector first.
When the system is triggered the perimeter alarm will operate as follows: The remote anti-theft personality module will pulse the following outputs at approximately 1.3 Hz, 50 percent duty cycle for two minutes 45 seconds for North America. NOTE: Other perimeter alarms can be programmed for the system.

  • low beam headlamps
  • parking lamps
  • horn
  • THEFT indicator
The perimeter alarm can be retriggered, after a perimeter alarm has sounded for 165 seconds. After a perimeter alarm has timed out, if any trigger input is first seen as normal and is then seen in its trigger state, the perimeter alarm will be retriggered. The perimeter alarm can be triggered a total of three times between an arming sequence and a disarm event. An active panic alarm will be deactivated when a perimeter alarm is triggered (a perimeter alarm overrides a panic alarm).

Mar 02, 2009 | 1998 Ford Windstar

1 Answer

EXACT LOCATION AND DESCRIPTION OF THE ANTI THEFT MODULE ON A 1998/1999 FORD WINDSTAR


there is no separate anti theft module, it is part of the PCM which is the main computer in the van that runs the engine and emission system as well as the PATS (Passive Anti Theft)

Tell me your problem and perhaps I can give u and answer, I am a Ford Factory Technician.

Mar 02, 2009 | 1998 Ford Windstar

1 Answer

Antitheft problem


Something in your anti theft system has failed. The key,transceiver, or module. The only way to find out is to run a diag on that circuit. You will need special tester.

Feb 01, 2009 | 2000 Ford Windstar

1 Answer

Can t locate anti theft module 2002 ford taurus


Passive Anti-Theft System (PATS) Module:
  • located behind the integrated control panel.
  • works in conjunction with PCM to enable or disable engine start function.
  • failure of the PATS or communication to the module may result in a no start condition.
  • if communication to the PATS module fails during diagnostics, refer to Section 13-11B .
04de616.gif

Dec 12, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
1999 Ford Windstar Logo

494 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...