Question about 1996 Ford Crown Victoria

1 Answer

1996 ford crown vic police model hard shifting

Shifts hard up and down. I can feel it.

Posted by on

  • Anonymous Mar 02, 2009

    I don't have a check engine light on. It is more noticeable as the car heats up. When its cold it does it not so much and is not as pronounced as when hot.Will a code reader show the trouble code for a mass airflow sensor?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

Do you have a check engine light on? The line pressure is too high in the transmission. This is either from a bad epc solenoid in the transmission or the computer commanding the pressure high from a bad MAF. If you have a bad MAF you should have other MAF (Mass Airflow Sensor) codes in the computer.

Posted on Mar 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have p1747 code will that lite up the red light top right corner of my dash on a 2000 crown viv police intercepter


That is a transmission code...

P1747 (EPC Shift Solenoid). Not uncommon for police interceptors...

Here is a discussion of other possible causes:

http://towtalk.net/forum/topic/2000-Crown-Vic-Police-Interceptor-.htm

May 13, 2015 | Cars & Trucks

1 Answer

Why my 2007 police crown Vic won't shift out of


All 2000 and up vehicles utilize a Solenoid which is powered by depressing the Brake Pedal to allow the Shift Lever to be move from Park to any other position. Is the Shift Lever located on the Steering Column or the Floor? In either case typically the Solenoids used by Ford do occasionally go bad. I highly recommend having a certified technician replace the solenoid.

Nov 18, 2011 | 2007 Ford Crown Victoria LX Sedan

1 Answer

Why my 2007 crown Vic won't shift in gear


this can be due to out of adjutment of shifter cable which releases the shifter when brake is pressed.

Nov 18, 2011 | 2007 Ford Crown Victoria LX Sedan

2 Answers

I have a 1999 Ford Crown Victoria Police Interceptor with a bad transmission. Will any transmission from a 1999 or 2000 Crown Vic. or Grand Marquis work as a replacement?


MOST INTERCEPTER CARS, MEAN THEY HAVE AN ADDED GEAR IN THE TRANSMISSION! WHAT YOU'LL BE DOING IS GOING TO A TRANSMISSION WITHOUT THAT EXTRA GEAR! TO ANSWER YOUR QUESTION: YES YOU CAN REPLACE IT WITH A REGULAR TRANSMISSION! YOU JUST WON'T BE ABLE TO CHASE BURGLARS! HAHA

Mar 04, 2011 | 1999 Ford Crown Victoria

1 Answer

I have a 1998 ford crown vic police intercepter and the transmission is sticking in first gear and when i let off the gas it shifts. what could be the problem? and oh i already did a trans flush.


thereis a transmission module i believe, and that tells it when to shift. if they didn't have them in that year model, then a vacuum line will also cause that

Nov 12, 2010 | 1998 Ford Crown Victoria

2 Answers

1985 Ford Crown Vic won't shift sometimes. Seems


Have he transmission drained and the screens cleaned

Jun 05, 2009 | 1995 Ford Crown Victoria

1 Answer

1995 crown vic gear problems/gear shift wont lock


most likely the shift tube bushings are bad- you may have also lost a few screws in the shift tube or they could just be loose. you have to pull the steernig column down to inspect/repair it.

May 30, 2009 | 1995 Ford Crown Victoria

1 Answer

Pulsing feel to right in steering wheel on hard left-hand turns.


What rims are on the car the steel police ones and what tires are on it could be hitting the stops on the frame and where the proper bolts put back in on the rack mounts and did you go with the heavy rack for the police car .Cause when I built them there was an issue with the proper bolts and there was a different rack for the cop cars the to the basic crown vic do to the suspension upgrade on it and the diffrent pump

Mar 12, 2009 | 2003 Ford Crown Victoria

1 Answer

2003 ford crown vic hard steering


i would have to say to check for a relay in your fuse boxes for power steering pressre switch or it may have its own police pkgs have a lot of relays due to all the extras

Sep 10, 2008 | 2003 Ford Crown Victoria

Not finding what you are looking for?
1996 Ford Crown Victoria Logo

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...