Question about 2003 Lincoln Navigator

1 Answer

I have a 2003 lincoln navigator 4x4 and would like to know how to remove both front rotor

Posted by on

  • jessegomez Mar 02, 2009

    thanks a lot this great help thanks agin

  • David Shaub May 11, 2010

    You might want to take the nut off the spindle before you start hitting it.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

Remove the brake calipers and the caliper brackets. Then the rotors should slide off, (should) Some times you need to beat the hell out of them with a big hammer. But don't hit the wheel studs.

Posted on Mar 02, 2009

  • Clint Smock
    Clint Smock Mar 02, 2009

    your welcome, good luck

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove a brake studd on a 1999 lincoln navigator


If it is a front rotor, it may be cheaper to replace the rotor, because you will need to pay to press the stud out and then pay to press a new one in or draw the new one in with extra nuts.

If it is a rear stud, there may be a tool to press the stud out while on the vehicle. If the vehicle is a 4x4 you would have more work to remove a front hub. Some autoparts stores loan tools.

Drilling out the stud takes a lot of work, grinding off the stud head from the backside may work if the stud is not too tapered. But you could grind the stud head off and still not be able to pull it through the outside because of a taper.

Aug 05, 2015 | Lincoln Cars & Trucks

1 Answer

2003 Lincoln NAVIGATOR


Take the 4x4 route and call it the day,more fun...TIME TO LET HER RIP cHUCK,MAKE IT A DIRT DAWBER....

Sep 11, 2014 | 2003 Lincoln Navigator

1 Answer

Transfer case


Check transfer case sensors.

Feb 23, 2014 | 2003 Lincoln Navigator

1 Answer

How to replace front brake rotor on 1998 Navigator 4WD


You replace them, just like any other vehicle.
Remove the caliper,then the rotor
Some fords ,you remove the caliper mounting bracket also
You need all metric tools,as has been the case for the last 30 years.

Nov 23, 2010 | 1998 Lincoln Navigator

2 Answers

How to remove the rotor on a navigator?


front or rear brake rotor? b sure to shut off the air ride system! the switch is located in the rear kick panel! lift and support front remove tires !the caliper has two mounting bolts remove those and hang caliper to the side using a metal coat hanger! now look at the bracket that was connected to the caliper remove those two bolts !the rotor should come off

Mar 16, 2010 | 2001 Lincoln Navigator

2 Answers

Can't get rotors off of the front of my Navigator


this is a very common problem, the rotors seize to the hub. You will need PB Blaster and a large hammer. Spray the blaster around the lugs studs and let it sit for about 1/2 an hour. Then start to beat on the rotor hat and be careful of the studs, if you are fortunate the rotors will come off. If not just purchase new ones and take out you prior frustration.

Nov 06, 2009 | 2003 Lincoln Navigator

1 Answer

How do i remove the front rotors on a 2003 4x4 navigator. iremoved the calipars but the rotors will not come off. I there anything else holding them on the vehicle?


Proabably a large nut that goes through the center of the rotor to attach it to the axle. Are the studs for mounting the rims part of the rotor? If so, this is probably your best bet (you'll probably have to specially purchase this socket because it's going to be a 22+mm).

Jul 04, 2009 | Lincoln Navigator Cars & Trucks

1 Answer

How can I remove gear shift knob on a 2003 Navigator?


it looks like you disconnect the shift cable and remove the center console finish panel with the shifter.


SECTION 501-12: Instrument Panel and Console 2003 Expedition/Navigator Workshop Manual
REMOVAL AND INSTALLATION Floor Console —Front, Navigator Removal and Installation
  1. Apply the parking brake.
  1. Position the front seat forward.
  1. Remove the two front floor console rear bolts.
  1. Position the front seats rearward.
  1. Disconnect the battery. For additional information, refer to Section 414-01 .
  1. Remove the pin-typ retainer and the window control switch panel.
    • Disconnect the electrical connectors.
  1. Move the shift lever to NEUTRAL and position the shift indicator bezel aside.
  1. Remove the screws and the center console finish panel.
    • Disconnect the electrical connectors.
  1. Disconnect the shift cable.
  1. Disconnect the front floor console electrical connectors.
    1. Loosen the electrical connector bolt.
    1. Disconnect the connector.
    1. Disconnect the electrical connector.
  1. Remove the front floor console side finish panel.
    • If equipped, disconnect the electrical connector.
  1. Remove the front floor console front bolts.
  1. Remove the floor console.

Apr 17, 2009 | 2003 Lincoln Navigator

1 Answer

Codes 308 and 401


cylinder 8 misfire , possible coil or plug, 401 egr code , possible dpfe sensor

Mar 15, 2009 | 2003 Lincoln Navigator

Not finding what you are looking for?
2003 Lincoln Navigator Logo

Related Topics:

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...