Question about 1995 Jeep Grand Cherokee

1 Answer

My jeep will not switch back out of 4 wheel drive and is load while in 4 wheel drive. I am switching while driving down the road is this right??

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 239 Answers

Yes but sometimes you have to pump the gas while driving to get it out of four wheel. you might even have to stop and put the reverse.

hope this helps
please rate good.

Posted on Mar 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jeep will not go back int 2-w drive


my guess... is car is 4wd not AWD, like my wrangler
and non go back to 2wd from 4wd if car is sitting on dry pavement.
you never stated road conditions ,so i guess at dry road and not offroad.
Partime 4wd is only for ICE or offroad, if you read the lost operators guide it tell you that.
the solution (TSB subject) is to drive to dirt and switch to 2wd.
if no dirt, jog car in a straight line, and try , forward the back the try.
or jackup one wheel. and try.
its locked in to 4wd due to WINDUP, (bad driving)

post on 1000s of forums and here 100 times.
http://www.fixkick.com/part-time-test.html

Mar 31, 2014 | 1995 Jeep Wrangler

2 Answers

What is the four wheel drive switch for??


The switch is to put the vehicle into four wheel drive for off-road and increased traction on snow and ice.

Mar 07, 2011 | 1993 Jeep Grand Cherokee

1 Answer

2003 gmc sierra 1500 4 wheel drive truck kicks in to 4 wheel drive on its own while driving down the road


look out the code.. and check the speed sensors and the harness......check also the switch maybe you use the auto 4 wheel...thars why it engage its self automatically depending on the road,

Jun 27, 2010 | 2003 GMC Sierra 2500HD

1 Answer

When attempting to switch from 2-wheel drive to 4-wheel drive on my 94 Jeep, there was an alarming rhythmic clunking sound, so I was forced to switch right back. What could this be?


Your transfer case could be bad, or your front lock hubs need to be locked. Did you switch over while moving or were you static? If switched while moving, you definitely damaged the t/c.

Feb 03, 2010 | 1994 Jeep Cherokee Country

4 Answers

I have a 93 jeep grand cherokee laredo it has 4all time neutral and 4lo should i keep it in 4all time all the time or does that ruin it


Yes, Your Jeep is what is known as a Quadra-Trac. This type of cherokee is an all wheel drive model. 4 wheel all time is for everyday driving, Neutral completely dissconects the drive train from the transmission and will not move at all. 4 wheel low is more for off road conditions where traction is compromised. 4 wheel low should NEVER be used at speed above 15 miles an hour.

To the guy above: 4 wheel drive is designed for low end pulling power and safer handling on slippery road conditions. 4 wheel drive has NOTHING to do with how fast you go or how fast you stop. Don't post a comment if you clearly don't know the correct information.

Jan 10, 2010 | 1993 Jeep Grand Cherokee

1 Answer

2004 jeep grand cherokee overland, 2.7 CRD, half to full lock, left or right, front end juddering and scrubbing tyres off


Sounds like it is in 4 wheel drive mode.
If you have a switch to disconnect the 4 wheel drive it may not be working.
If the vehicle is full time 4 wheel drive or computer controlled 4 wheel drive you have most likely a locked in full 4 wheel drive mode situation.
Not good on dry pavement.

Sep 08, 2009 | 2004 Jeep Grand Cherokee

1 Answer

4 wheel drive problem


check your linkage bolt first. if it has came loose you will need to make sure it is set to be in 2 wheel drive.first make sure your shift lever is in the 2 wheel drive postion then crawl under the jeep loosen the nut move the lever all the way forward (front of the jeep) this is 4 low , move it back one notch and this is netural, move it back one more and this is 4 high, move it one more notch this is 2 wheel drive. tighten the bolt. this should get you back on the road.

May 16, 2009 | 1993 Jeep Cherokee Country

3 Answers

'93 Jeep Gr. Cherokee 4x4 switch warning


this switch does not switch the vehicle from 2 wheel to 4 wheel drive. Grand cherokee have a manual shifter for that. The 4x4 switch is on top of the transfer case and tells the driver information display what 4 wheel drive mode the Jeep is in. ex..if you have selectrac, in 2 wheel the rear wheels on the display will light up, in 4 wheel all 4 wheels will light up, in 4 wheel low it will have the word low lit up in yellow. This is the only purpose for this switch and a bad one will not affect the functioning of the 4 wheel drive. Check out Rockauto.com and a new one can be purchased for about 35 dollars. If you call the dealership and ask for a 4 wheel drive switch, they will have no clue what you are talking about. The actual name is " 4WD indicator light switch"

Feb 22, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Switching to 4 wheel drive


YOU WERE RIGHT. it does not have to be put in neutral. Just stop or slow down the rpms. Before switching to 4 wheel drive.

Dec 18, 2008 | 2003 Ford F150 Regular Cab

3 Answers

1998 Jeep Cherokee Sport 4 wheel drive


I also have a 1998 jeep cherokee sport, i was having the same issues so i asked my uncle who is a mechanic.. he told me since the jeep automatically locks the hubs when you put it in 4 wheel drive, sometimes the hub locks get stuck trying to unlock, to solve this when you switch back to 2 wheel drive, reverse like 10 - 15 feet, the wheels spinning the opposite way help unlock the hubs, since i started doing this as soon as i reverse i feel the 4 wheel drive unengage and have not had a problem with it since, give it a try and see if that fixes your problem

Dec 02, 2008 | 1989 Jeep Cherokee

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...