Question about 1988 Mazda B2600 Cab Plus

1 Answer

96 brazo oil and mtal in over head cam engin stopped on highway

Hi i have a 96 model Mazda bravo b2600 manual on petrol the problem is that the engine stopped down the highway as i pulled over it was making rattling noises in the engine. and it is not the timing chain and i found oil and metal fragments in the over head cam behind the throttle body???? does any body know what thee problem is?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 507 Answers

I have seen some mazda motors having busted cam shafts, so that's the only thing i can think of. if you didn't say behind the throtle body, i would say you have a busted piston but i doubt that's the case here.

Posted on Mar 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford Couirier/Mazda Bravo 1994 2.6 petrol 4x4 B2600 I need to buy new/used ECU (G618) replacement or upgrade for my 4x4 ute I want to know the compatible units i can use and best place to get one.


the ecu has to come out of the
same year and number as the engine and drive line
Ford Courier/Mazda Bravo 1994 2.6 petrol 4x4 B2600
source from
ebay
a 4x4 wrecker
an good auto electrican can referb your original
this is usa but might be a seller some where in australia

edit I added image of a G695
http://www.ebay.com/itm/OEM-91-92-93-MAZDA-B2600i-TRUCK-ENGINE-COMPUTER-CONTROL-MODULE-ECU-G618-18-881A-/1916530508691a07fc2d-2613-4d2f-a996-9a4d38ad626f.jpgford-couirier-mazda-bravo-1994-2-6#sln-36462275-ynwsor2g41t5qaon3uf1gyaf-5-2_2.jpgford-couirier-mazda-bravo-1994-2-6-ynwsor2g41t5qaon3uf1gyaf-5-3.jpg

Sep 11, 2016 | Ford Cars & Trucks

1 Answer

Does anyone know we're the idle speed/ throttle


if there were one it would be on the throttle body also you can read the data sticker in the engine compartment and it will tell you if there is adjustments

Jun 03, 2013 | Cars & Trucks

1 Answer

1998 mazda bravo ute b2600 petrol- Cannot locate the oil filter to change. Can find the sump and bung. Is it possible this model has no oil filter?


No!!!! The motor has oil filter.Look from the top of the motor.It is right there.Under the manifold.Hope this helps

May 25, 2011 | 1998 Mazda B-Series

1 Answer

I need to set up the camshaft timing marks on a 1994 mazda b2600


its not just the camshaft timing marks you set up, you also have to have the crankshaft timing mark set right to or you may damage your engine
check the internet for the right timing procedure for you model car ok

Jun 11, 2010 | 1988 Mazda B2600 Cab Plus

1 Answer

Engine compression low on three cylinders, what should the compression psi or bar be please? It has a slight miss but leads and plugs seem to be sparking fine, any ideas. This vehicle is actually a 93...


yes a head gasket failure cancause this. spary oil, wd-40 into those 3 cyc;lindersand see if cmpression increases. if it does you need rings. if it does not you need a head gasket.

Jan 02, 2010 | 1988 Mazda B2600 Cab Plus

2 Answers

Changing gearbox oil ?


i accidently drained some of the gearbox oil from my bravo b2600 1997. where is the hole to put more fluid back in there? how much should i put? and what fluid should i use?

Dec 26, 2009 | 1999 Mazda B-Series

1 Answer

Have Mazda bravo B2600 4WD ,has white smoke & oil from exhaust. Running rough as if on 3 cylinder


You dont say weather its a petrol or diesel engine as there a slight differance in the answer and if a turbo on a diesel thats even more of a differance, but taking it a petrol .
Well to start with the white smoke Isent smoke its water and after going through the engine it turns into Steam and thats what you see..
Running on 3 clyinders is caused through 1 cylinder isent working as a engine should and has a bad valve or a broken piston ring or more and even a cracked head and gasket letting the water through,,,also the broken ring works like a oil pump as if not firing given you power then it works like a oil pump and pumps it into the cylinder that dosent work only pumping oil into the hot exhaust system while running.CAUSING SMOKE
And if a turbo then could be the turbo bearings worn and pushing oil into the engine and still doing the same as before.
Let me know how you get on. RON

Nov 17, 2009 | 2007 Mazda B Series

Not finding what you are looking for?
Cars & Trucks Logo

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...