Question about 2001 Isuzu Trooper

1 Answer

Isuzu Trooper V6 2001 multi rib belt replacement

How do I replace the multi rib belt (a/c, alternator etc.) on the above vehicle. What keeps the correct tension in the belt. Do you have a diagram.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 104 Answers

They have an automatic tensioner, like a spring loaded pulley. They are usually quite easy to pull back using a power bar or spanner. For the routing diagram, click here

Posted on Mar 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1998 Isuzu trooper 3.5 alternator replace


step one remove battery neg lug .
the above video (of book?) is wrong.
the belt tension-ing step was skipped.

remove belt steps remove alt. wiring. remove alternator (bolts) it falls free. replace it , reverse steps above belt back tension belt. battery cable back. test run. charge/BAT lamp off?
see wrench below, turn it CW.
this releases the spring tension and belt comes off
to put back, do same and put on belt and release wrench.

25186758-dk3xh54xw1fmpqbxyhqoyzal-4-0.jpg3.5L only. USA only.

Oct 05, 2014 | Isuzu Trooper Cars & Trucks

2 Answers

I replaced the battery in January for my Isuzu


In today vehicle there are many electronic device that still draw power from the battery.

Example:
Car radio memory on station pre-set
Car radio clock
Computer/ECU to save driving parameters
Car alarm + sensors
Power seat menory

To prevent problem,I will start the engine for 5 minutes once a week.

If are in an enclose area and has access to a power outlet then it's a good idea to connect a float battery charger to keep the battery is optimal condition.

Here is a sample of float charger / battery tender.

c6655a5.jpg
It's on sale for $7.99 now or you can but better quality one at your local auto part store for $30+

Link to Harbor Freight page HERE

====
It's a good idea to check for worn belt and weak alternator.

A belt with 60,000 or 5 years should be replace.

Check the voltage at the battery terminal after the engine is warm up for 5 minutes. The voltage should be above 13.8V

Auto supply store may provide more in-depth battery and alternator testing for free.

Please email me if you have any question.

Jul 12, 2010 | 2002 Isuzu Trooper

1 Answer

What is the size of the trooper fan belt


Which belt? I believe there are 3.
Alt. is a Valucraft 377K4 (4 ribs.X 37.75")
Power Steering is a Valucraft 15405 (15/32" X 40.5")
A/C is a Valucraft 315K4 (4 ribs.X 31.5")

All are availalbe from Autozone for under $10 each.

Jul 10, 2010 | 1996 Isuzu Trooper

1 Answer

1999 Trooper: steps in replacing timing belt on 1999 isuzu troop...


I also did a small write-up but this is much better.
http://www.2carpros.com/car_repair_information/year/1999/make/isuzu/model/trooper/1999_isuzu_trooper_timing_belt_diagram_marks.htm

May 17, 2010 | 1999 Isuzu Trooper

1 Answer

Isuzu Trooper 3.1 TDi Fan belt keeps stretching


Have you tried after market belts? sometimes you get this problem and i haved not encountered a solution for this but to replace the belt and tighten to specification. sometimes the heat causes this abnormality. My email rexsorliberato@yahoo.com Keep me posted.

Nov 29, 2009 | 1992 Isuzu Trooper

1 Answer

1998 Jeep Grand Cherokee - Multi-rib belt Removal & Replacement


Check on upper rad shroud or under hood for routing diagram. Depending on what engine, procedure may vary a little. I wouldn't panic on replacing anything other than belt unless you noticed something noisy under hood in last while.
If not up to it, a mechanic should be able to do it for you in a few minutes usually, but won't hurt to ask before, just in case.

Jun 27, 2009 | 1998 Jeep Grand Cherokee

2 Answers

How can i fix a 1999 isuzu trooper alternator


Get the old one repaired at a place that does this.

Jun 23, 2009 | 1998 Isuzu Trooper

2 Answers

Isuzu Trooper V6 2001 multi rib belt adjustment


First, if you're serious about car repair, get the shop manual (helminc.com). Not cheap, but cheaper than ruining your engine.

Second, unless you are confident in your mechanical abilities and / or are willing to use your vehicle as training, leave major work to the pros. A good mechanic is like gold, and just as hard to find.

Third, you don't really adjust the tension. There is a spring-loaded idler that puts just the right amount of tension on the belt. Using the proper tool, you lever the idler to take the tension out and slip the belt off the other pullies. Then take the new belt and rout it just like the old one, lever the idler again, then slowly release it back against the belt to take out the slack.

Piece of cake...

Mar 01, 2009 | 2001 Isuzu Trooper

1 Answer

Alternator belt diagram 1992 Isuzu trooper


1. Remove battery terminals and secure them away from the battery posts using nylon wire ties.

1a. Fine some comfortable eye glasses (clear or yellow) and keep them on. There are plenty of opportunities to get debris in your eyes during this procedure.

2. Spray "PB Blaster" (loosens bolts) on two bolts that secures alternator.

3. Jack-up vehicle on side to access alternator. Use a jackstand to support.

4. Using a 10mm open-ended wrench, loosen the bolt that swings the alternator. Screwing the bolt "in" or toward the engine will allow play to increase in the alternator belt. Loosen the 12mm bolt slightly next to the 10mm bolt (approximately 1.5" toward engine).

5. Continue to loosen 10mm bolt until there is enough slack in the belt to remove the belt from the alternator pulley.

6. Remove belt. It may be possible to remove belt without removing fan faring. Maybe not. If not, you will need to remove plastic fairing. If you must remove fair, go below fan fairing and disassemble connectors that hold together pieces of fan fairing. Carefully remove.

7. Install alternator fan from above.

8. Check that alternator belt is on all tracks (from below with a flashlight), and slowly tighten.

9. Secure 10mm and 12mm bolts. Recheck tightness.

10. Reassemble battery connection and run vehicle at idle for about 5 minutes. Check belt for proper tension.

11. CAREFULLY check tension of belt. Or disassemble battery connections and re-check belt tension.

12. Reassemble fan fairing (if not already assembled), re-connect battery terminals, and have a nice day. :-)

Nov 04, 2008 | 1992 Isuzu Trooper

Not finding what you are looking for?
2001 Isuzu Trooper Logo

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...