Question about 1996 Mitsubishi Galant

1 Answer

No power to fuel pump every thing else is fine

Posted by on

  • airezz Apr 08, 2009

    I also have no power to the fuel pump in a 2002 Galant, I have had a mechanic assist and checked the relay under the hood as well as fuse, is the any other relays for the fuel pump or any ideas

  • Anonymous Apr 16, 2009

    NO POWER TO FUEL PUMP

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 4,369 Answers

Check fuel pump realy and fuse.

Posted on Mar 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Pontiac Grand Prix GTP not getting power to fuel pump


there may be some bad wireing in it that went bad or some thing i own a 2002 ponitac grand prix and it has power probums but i never see that one before but check the wireing

Mar 07, 2013 | Cars & Trucks

1 Answer

1993 Subaru Impreza engine problems


ok first question where did you buy the fuel pump tell me other try this when car is not starting go to fuel pump get a circuit tester have somebody else turn key to on position for ten seconds turn off then again if no noise from pump check for power at fuel pump there should be one wire that has power for obout ten seconds then cuts of. if power to pump and it does the ten second on and shuts of by it self then you got a faulty pump, now if no power at all on ten second teste then get a long wire thay can reach from battery to fuel pump hook up to your battery go to wire at fuel pump and hit it with wire from battery if you can hear pump going on them you have a bad contact ether at fuel pump conector or at relay conector or bad wire one thing when looking at conector at fuel pump you will find sevral wires two wires are for fuel level one power on ground other wires are for pump one ground and other for power to pump if any question ask me i will help i am a mechanic let me know

Nov 21, 2012 | 1993 Subaru Impreza

1 Answer

What's a Diode & How to Check it


Improve the FixYa experience for everyone by voting!
Hi Mark Wilkinson:
The first thing you should do is to check the fuel pump relay. If that check out to be operational, conduct a fuel pressure check at the injector rail. That's the way to determine if the pump is functional.
If there is still no fuel reaching the rail, you'll have to use a OBD-I scanner to accurately pinpoint the problem.
All the best,
Ben

Dec 04, 2011 | 1993 Ford Explorer Limited

2 Answers

1998 chev 1500 hard starting when cold but starts fine after warming up changed plugs and sensors


The first thing i would tey is changeing the fuel filter. Chevy has a problem with the design from the fuel pump to the fuel inlet on the intake manifold. What they did it is back up the power supply to the fuel pump from the fuel relay and split the curicut and ran the back up through the oil pressure sending unit . So even if the relay went bad while driveing the fuel pump would still get power and the truck wouldn't die on the road its a saftey thing .But if the relay is bad then the engine needs to build up enough oil pressure to trip the oil sending unit to send power to the pump from cranking thus a long cranking time when cold . Change the fuel filter first it should be replaced every 4 to 5 years anyway . A nd if that dosn't fix it try the relay it should be behind a panal inside the glove box on your truck and if that dosn't work replace the oil pressure sending unit. One of these 3 things should work if the fuel pump is working correctly

Sep 17, 2011 | 1998 Chevrolet C1500

1 Answer

Will turn over but not start-need help quick


One easy thing is to tap on the bottom of the fuel tank while trying to start it.If it starts then you know it`s the fuel pump.The only other thing is to check the fuel pressure but you need a pressure tester.The other thing is to check and make sure you have power to the pump.This is the gray wire at the pump connector.Also make sure your ground is good.The specified pressure is 55-60 psi.Hope this helps.Good luck.

Dec 17, 2009 | 1999 GMC Jimmy

2 Answers

Runs fine till warms up then losses power and dies


Does the fuel line still have 55 PSI when engine warmed up? Any other codes show up?

Aug 22, 2009 | 1998 Chevrolet Blazer

2 Answers

Cranks but won't start,new fuel pump,no power going to pump


look at inerata reset switch check for power at the switch

Jun 23, 2009 | 1993 Ford Ranger SuperCab

4 Answers

My fuel pump has no power on a 1998 lincoln continental.


check the power distribution center ,,, also check the key to make sure the chip is still in it

Nov 12, 2008 | 1999 Lincoln Town Car

3 Answers

Fuel system


fuel strauner inside tank

Jun 23, 2008 | 1992 Cadillac DeVille

Not finding what you are looking for?
1996 Mitsubishi Galant Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...