- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You can pick up the handle from your local GMC dealer. I paid roughly $90 for both (a bit high...but money well spent!) As noted, yes; you do have to remove the interior door panel. From there it's just a matter of removing 4 nuts (metric #10 socket), and replacing them back once the new handle is slipped into place! The bars that operate the door latches simply snap into the plastic clips attached to the handle assembly.
The operation sounds worse then what it really is. It took me longer to write up this review than it did to actually do the work! 5 minutes max...done!! Hell, if you're local; buy the parts
look under the hood on the right side where your brake fluid is..There is a black box to the farest right of the brake fluid. take off the lid to this box were you will find fuses..Reach in and feel the fuses to see if any are loose.The largest fuses in the front, push down on those and then try to start it up..Take them out look at them make sure there ok if this dont work..they the one bad might need to be replaced..
could be a bad fuel pump, or fuel pump relay. they are having problems(a lot) with the ethanol in the gas on GM products.Fuel pumps sales are through the roof at parts house on GM's. Have a pressure check on your fuel system. That is probably it. Add a can of Seafoam to your fuel every 3000 miles to alleviate this problem.