Question about 1989 Oldsmobile Cutlass Supreme

1 Answer

Broken front lug bolt 94 cutlass surpeme

Broken front lug bolt

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 239 Answers

You can replace the stud by hitting it out with a hammer and punch. by a new stud and nut. put the new stud through the hole to pull it through put the lug nut on backwords and tightening it down until it seats completely.

hope this helps.
please rate good.

Posted on Mar 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Do you know where the 2 bolts are on a starter for a 94 olds cutlass ciera s?


REMOVE THE STARTER FLY WHEEL COVER. STARTER BOLTS IS VERTICAL BOLTED INTO THE ENGINE.

Jul 08, 2011 | 1994 Oldsmobile Cutlass Ciera

1 Answer

What type come in a 1985 cutless surpeme


350 ENGINE IF THATS WHAT YOUR ASKING FINISH YOUR QUESTION OK TYPE OF WHAT

Mar 03, 2011 | 1985 Oldsmobile Cutlass Supreme

1 Answer

What is the bolt pattern for a 1992 cutlass ceira


Is it five lug or four lug...I believe its 4x100mm or 5x115 mm

Nov 14, 2010 | 1992 Oldsmobile Cutlass Ciera

3 Answers

Broken lug nut on right front wheel. Can you buy just one lug bolt and nut. the threads are stripped and they both need to be replaced. what is the procedure to replace the bolt?


hi,
remove the rotor with the lugs in it - take it to NAPA - they will remove the old one and replace it with a new lug bolt/nut combo for the price of the parts. 28ab2be.jpg

Apr 08, 2010 | 1998 Ford Ranger SuperCab

1 Answer

My front driver side in the middle of my rim the bolt has snapped off an i need to know what its called an how to fix it


lug stud or lug bolt. you need to get the rotor off and lay it flat bolts up on a piece of wood tthen hit the broken one with a hammer should pop out back then push the new one in from the back when you put the tire back on the lug nut with set it in place

Oct 24, 2009 | 1996 Plymouth Breeze

1 Answer

I need to know how to put rear struts on a 96 olds cutlass supreme, ( instructions)


I just had to do this to my cutlass supreme. It is fairly easy. First, you need to jack the car up in the rear (but dont forget to put wheel chocks in front of the front wheels to prevent any chance of rolling, and break all of the lug nuts loose while the car is still on the ground, and put jack stands under it to keep the car raised safely) and remove the rear wheels. Then look at where the strut mounts to the wheel, there are two bolts holding it on the wheel assembly; remove those (you may need to jack ut the suspension to remove the bolts). Now locate the two smaller bolts to each side of the the strut itself on the strut mount, holding it to the car (this is located at the very top of the wheel well) and remove them. Now u can compress the strut by hand and wiggle it free from the car. Once u have the old strut out, remove the large nut that is securing the strut to the mount. In some cases this is impossible to do due to the rust that has binded them together. If this happens, you will need to purchase a new strut mount for your new strut. AutoZone seems to be the cheepest place for parts. To install the new struts just do everything backwards. When the new struts are installed, the wheels may be slanted down. If this is the case, do not worry, they just need time to "relax" or be broken in. I hope everything goes smoothly and i wish you luck.

Aug 19, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

2 Answers

Cant remove wheel hub


here is procedure

Section 04-01: Suspension and Wheel Hubs, Front 1996 Taurus, Sable Workshop Manual
REMOVAL AND INSTALLATION Wheel Hub Bolt Removal
  1. Raise vehicle on hoist.
  1. Remove wheel and tire assembly. Refer to Section 04-04 .
  1. Remove disc brake caliper (2B120), and front disc brake rotor (1125). Refer to Section 06-03 .
Brake Shoe and Lining Removal
  1. Remove brake master cylinder filler cap (2162). Check fluid level in brake master cylinder reservoir (2K478). Remove brake fluid until brake master cylinder reservoir is half full. Discard removed fluid.
  1. Raise vehicle on hoist. Refer to Section 00-02 .
  1. Remove wheel and tire assembly from front disc brake rotor mounting face. Use care to avoid damage or interference with disc brake caliper (2B120), front disc brake rotor shield (2K004) or front wheel knuckle (3K185).
  1. Remove rear brake pin retainers (2N386). ( I think it is a T 40 torx bit you need)
  1. NOTE: It is not necessary to disconnect hydraulic connections.

    Lift disc brake caliper from front disc brake caliper anchor plate (2B292) and front disc brake rotor (1125). Do not pry directly against metal caliper piston or damage will occur.
  1. Position disc brake caliper out of the way and support with wire to avoid damaging the disc brake caliper and front brake hose (2078).
  1. Remove outer brake shoe and lining (2001) assembly from front disc brake caliper anchor plate.
  1. Remove inner brake shoe and lining assembly.
  1. Position lug bolt (1107) to clear front wheel knuckle (3K185).
  1. Remove lug bolt from wheel hub (1104).



7548d8f.gif

Installation
  1. Install lug bolt into wheel hub.
  1. Using a lug nut (1012), seat wheel hub bolt into wheel hub.
  1. Install front disc brake rotor and disc brake caliper. Refer to Section 06-03 .
  1. Install wheel and tire assembly. Tighten lug nut to 115-142Nm (85-104 lb-ft).

May 25, 2009 | 1996 Mercury Sable

1 Answer

Need to replace broken lug bolt


If you have room behind the broken lug you can usually drive it out with a good smack of a sledge hammer. To re-install, use a stack of washers between the nut and flange and draw the lug into position. (plenty of oil on threads to avoid galling)

Apr 19, 2009 | Toyota Tacoma Cars & Trucks

1 Answer

1989 oldsmobile cutlass supreme front drivers side ball joint replacement


you can buy a new lower control arm but the cheaper way out is you can buy a new ball joint for about $15 and cut off the rivits holding the old one and bolt on the new one in place with the supplied hardware hope this helps also a airhammer make quick work of rivits please rate -jeff

Aug 05, 2008 | 1989 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...