Question about 2005 Toyota Tacoma

1 Answer

Need to know how to remove condensor - 2005 Toyota Tacoma

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

It is not that hard to do make sure you have safety glasses on and get an A/C disconnect tool to fit your lines and you may have to take out the front grill to give you more room if you have a library near you this is a place you can get pictures and diagrams for your truck

Posted on Mar 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove air con condensor


Hi Denis, Im AL the owner of Big As Auto Repair

Denis, I can't tell you the proper way to remove your A/C Condensor without knowing what kind of vehicle you have the year, make, model and engine size, because every vehicle is removed differently. Please go to my auto-repair website and click on "Contact Us" and leave your information along with the vehicle Info and I'll be glad to help. Here's my website: http://www.bigasautorepair.com/

Jul 04, 2015 | Cars & Trucks

2 Answers

Need to remove radiator


YOU NEED TO DRAIN RADIATOR AND ENGINE BLOCK.NEED TO DRAIN THE BOTTOM WATER PIPE.DISCONNECT THE TOP AND BOTTOM WATER HOSES.SEPERATE THE UPPER FROM THE LOWER RADIATOR SHROUD AND REMOVE THE UPPER SHROUD FROM THE CAR.REMOVE THE CROSSMEMBER AND HEADER TANK.REMOVE THE CONTROL ROD FROM THE DRAIN TAP.REMOVE THE LOWER MOUNTING SCREWS AND RUBBER MOUNTING CUSHIONS.THEN LIFT OUT THE RADIATOR.IF CAR HAS AIR CONDITIONER YOU NEED TO DETACH THE CONDENSOR FROM ITS MOUNTING BRACKETS DONT DISCONNECT ANY CONDENSOR REFRIGERANT LINES. YOU NEED TO SUPPORT CONDENSOR WITH SOME WIRE TO KEEP IT FROM FALLING BEING DAMAGED.

Sep 11, 2011 | 1993 Jaguar XJ6

1 Answer

How do I remove the ac condenser and what tools are necessary?


YOU NEED TAKE VECHICLE TO DEALERSHIP OR GARAGE THAT DOES AC REPAIR.THEY NEED TO DISCHARGE AC SYSTEM BEFORE YOU CAN REMOVE AC CONDENSOR.YOU NEED SPECIAL AC SPRING LOCK TOOL TO RELEASE THE COUPLER ON THE REFRIGERANT LINE TO CONDENSOR. THE COOLING FAN AND CONDENSOR REMOVE AS ASSEMBLY.

Aug 13, 2011 | 1998 Dodge Dakota

1 Answer

I need to know how to unhook the condenser to put another one on


you will need to remove the radiator and upper and lower radiator hoses. get it out of the way, then unhook the a/c lines on each side of the condensor, then remove the retaining bolts that hold it to the body. it should come out then.you'll lose the coolant unless you drain the coolant[antifreeze] into a holding fan for reuse. remember if you have pets to store that antifreeze up and away from pets and children. you will also lose you a/c refrigerant. unless you have an a/c vacum pump.you'll lose it when you loosen the condensor lines.but if you're replacing the condensor i suppose you've lost it already. good luck! and thank you for choosing fixya.com

Dec 30, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

Need to remove ac condensor


you will have to evacuate the system first. The condensor is located just in front of the radiator. You will have to disconnect the lines going to it and un bolt it. it's easer to do with the radiator removed.

Nov 16, 2010 | 1996 Lincoln Town Car

1 Answer

Need to remove and replace a radiator


You will need to remove the headlamps, bumper skin, radiator support, and unbolt the a/c condensor from the radiator. With some time, a metric socket rail and patience you can take it out, it's pretty easy. Just make sure you don't damage the condensor or new radiator during repair.

Aug 10, 2010 | 2002 Hyundai Santa Fe

1 Answer

How do you remove a radiator from 2006 ford explorer


You need to evacuate a/c system, drain radiator, remove fan and fan shrout, disconnect both a/c line's going to a/c condensor, remove upper and lower coolant hoses, you'll well need a oil cooler line disconnect tool ( napa has it part # 775-9086 ) remove both upper bolt's that screw on to radiator support, remove radiator and condensor as one, remove both 10mm bolt's that screw into radiator, remove both side radiator bracket's install both bracket's on new radiator, and reinstall new radiator, you will need to evacuate a/c system and recharge. Hope this was helpful.

Dec 02, 2009 | 2006 Ford Explorer

1 Answer

I need to know how to get to the airconditioner condensor from up


You can get to it from the inside but it is a lot of work remove the kick pannel to get to the scres to drop the drain pan. Also try removing the glove box you may be able to get to it from there. You may have dropped something in the drain pan threw the vent holes.

Aug 26, 2009 | 1997 Chevrolet Venture

1 Answer

How to replace ac condensor on 1995 dodge neon


un hook the lines, remove the radiator, remove the ac lines, remove the condenser supports, then it is out. i would not recommend this to a novice mechanic. you need a vaccume pump to refill the r134a.

Mar 26, 2009 | 1995 Dodge Neon

Not finding what you are looking for?
2005 Toyota Tacoma Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...