Question about 1993 Ford Taurus

2 Answers

1993 Ford Taurus Diagnostic Plug - OBD2 Meter

Where is it under the hood?

Posted by on

  • 2 more comments 
  • bs_macneil Mar 01, 2009

    Okay we have the OBD1 as well so can you please tell where the plug is?

  • bs_macneil Mar 01, 2009

    We went and looked for the plug in that location and removed the cover at the top of the shock tower and still see nothing....is there anyway that you can clarify a little more? Anything would be appreciated

  • yadayada
    yadayada May 11, 2010

    U don't have OBD 2 so if that is the kind of scanner u have it won't work, the diagnostic plug is for OBD 1, it is a triangle shape and requires a Ford Stat test scanner to acces the ingo from the plug.

  • Anonymous Mar 13, 2014

    it will not start up my obd2 pocketscaner come up o codes the mil is off

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

Open up the hood it is on the drivers side inner fender well near the shock tower there are two connectors. hope this helps

Posted on Mar 01, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 61,203 Answers

Here are some helpful pictures and info, click the link.
http://zenseeker.net/4x4/eec/4hup96.gif

Posted on Mar 01, 2009

  • yadayada
    yadayada Mar 01, 2009

    these are your type of test connector. under hood.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I access the trouble codes on a 1995 Mercury Grand Marquis without a scan tool?


You can access them by going to the link, some late 1995 vehicles were OBD2, then you would have a diagnostic connector under the dash below the steering wheel, otherwise you do it under the hood (OBD1). FORD 1983 1995 OBD1 Decoder

Oct 07, 2016 | 1995 Mercury Grand Marquis

1 Answer

Where is the diagnostic connector located on a 1993 Ford E350 van


Under the hood, it is red or black triangle, but you need a special to took to scan at that connector. This is a OBD1 system (AKA EEC IV), Not OBD2

May 22, 2016 | Ford Cars & Trucks

1 Answer

Where is the vacuum hose located on a 1993 Ford Taurus 3.0 engine,& can/or will it cause a vehicle to fail smog


Which of the many hoses?

No diagram under the hood?

Price range to repair what?

A repair shop has no idea what they are going
to charge you, until you pay to find a problem first

No price or nothing to fix until you find something

Dec 01, 2014 | 1993 Ford Taurus

1 Answer

Where is the obd located on a 95 taurus sho


1995 was a change-over year for OBD systems.
If the OBD2 plug is not under the steering column, the OBD1 plugs are under the hood near one of the strut towers.

Jan 16, 2013 | 1995 Ford Taurus

1 Answer

What weight oil do I use 1993 Taurus sho 3.2


The best way to get oil weight is look under the hood for a white sticker...it will have the recommended weight ....good luck

Nov 18, 2012 | 1993 Ford Taurus

1 Answer

Where is the obd2 plug in on an 1993 mercury cougar ar7


Your 93 does not have an OBDII plug. Those didn't start until 1995 or 1996, depending on the vehicle. There is a diagnostic plug under the hood. They moved them around a bit but it is usually on one of the inner fenders.

Sep 04, 2011 | 1993 Mercury Cougar

1 Answer

Where is the engine computer connection to connect the code reader?


The OBD diagnostic link connector (where you plug it in) is located Under hood, passenger side, upper firewall, mounted beside A/C evaporator housing on firewall. I hope this helped and good luck.

Feb 25, 2011 | 1993 Ford Explorer Limited

2 Answers

1993 ford taurus 3.8l walgon: Engine is running very rough and seems like it may be getting too much gas. There is no smoke coming from the exaust. The plugs have just been replaced,


Run a diagnostic tool. It is a sensor (O2 or Map) that will cause this but need the scan tool to diagnose the specific problem. Your connections should be under the hood. Good luck

Jan 18, 2011 | Ford Taurus Cars & Trucks

2 Answers

1993 ford tarus 3.0 engine had weak spark after changed coil fired a couple of times know no spark? any ideas


Using a volt meter disconnect the electrical plug to coil and check with key on to be sure there is at least 12 volt to coils. if not or voltage is low the ignition switch may be bad, have an assistant jiggle the key in ignition while you are looking at the meter to note voltage fluctuations if any are noted ign. switch is bad also check all fuses under dash as wellas in engine compartment.

Oct 29, 2010 | 1993 Ford Taurus

1 Answer

Passenger side windows don't work on a 1993 ford taurus gl What would be the problem?


pull your panels off and check to make sure your harneses are hooked up correctly if they are than check the drivers side plugs. the check your relay box under the hood. ford likes to complicate things.

Aug 14, 2008 | 1996 Ford Taurus

Not finding what you are looking for?
1993 Ford Taurus Logo

Related Topics:

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...