Question about 1998 Buick LeSabre

Open Question

98 lesabre code P1676 what to do. - 1998 Buick LeSabre

Posted by on

  • yadayada
    yadayada May 11, 2010

    P1676 - Driver 4 Line 6 I have never seen this paticuliar EVAP system code, recommend you go to the dealer for proper diagnosis.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is TSB 71-65-66 and how to fix it?


DTC 1676 [Archive] - FirebirdV6.com/CamaroV6.com Message Board

forum.camarov6.com > ... > Technical > Advanced Engine

Mar 6, 2003 - 9 posts - ‎4 authors
71-65-66 NOV 97 Engine Controls - EVAP DTC's P1665 & P1676 Added " that is from alldata as a TSB i dont know what "EVAP" is though.

Find Technical Service Bulletins for your 1998 Buick ...

tsb.govwebs.com/k-vin-v638l-lesabre-buick-1998-10199.html
Free Technical Service Bulletin and Recall Titles for 1998 Buick LeSabre V6-3.8L VIN K ..... 71-65-66, NOVEMBER 1997, Engine Controls - EVAP DTC`s P1665 ...

Trouble Code - AutoZone

www.autozone.com/.../Buick.../_/P-0996b43f8036fc4e

AutoZone... power circuit is open (check ENG EMISS fuse). Purge solenoid is damaged, or the PCM has failed. TSB 71-65-66 contains a repair procedure for this code ..

Nov 24, 2015 | 1998 Buick Century

1 Answer

Please help my ssangyong rexton2.7 D gazoil Stuart only with Stuart pilot .because code error P11 48 C1623 P1676. P0343 Think you


C1623 is with in the chassis sensors P1148, P1623, P1676 is in the ECM not on my list of codes not sure what it is. call parts house and they can tell you what it is. PO343 is camshaft position sensor circuit high input. P1148 not sure not on my list of codes they may be in the newer codes list but I don't have an updated list

Jun 18, 2014 | Cars & Trucks

1 Answer

1999 honda oddesy van with trouble code p1676


not sure what it means but here is what the code says
P1676
FPTDR Signal Line Failure

Sep 17, 2013 | Honda Odyssey Cars & Trucks

1 Answer

Oem code p1676


http://www.gmforum.com/obd-ii-trouble-shooting-153/p1676-284196/

Feb 24, 2013 | 1999 Chevrolet Malibu

2 Answers

P1676 audi


VAG OBD Error Code Details for P1676 Drive by Wire-MIL Circ. Electrical Malfunction

Aug 31, 2012 | Cars & Trucks

1 Answer

Check engine light on, code # p1676 and PO 113


I don't show a code 113 for a Buick, but the code means the signal from the air temp sensor is high, which means the air temp is below zero or the sensor is faulty, or a problem with the wiring to the sensor.
Code 1676 is a problem with the canister purge solenoid which is how the computer vents the fuel tank. Could also be a problem with the vent for the tank.

Jun 30, 2012 | 1999 Buick LeSabre

1 Answer

Code P1676


P1976 is Driver 4 Line 6 EVAP Canister Purge Solenoid Control CKT Step Action Value

Sep 29, 2011 | 1998 Buick LeSabre

1 Answer

What does the P1676 code mean, and what is most likely the problem? My code reader says Driver 4 Line 6 but that means nothing to me. I have a 98 grand prix GT with the 3800 V6.


i don't know about your reader? but a P1676 is a evap vent solenoid control circuit problem. the solenoid could be stuck or the wires/connections could be corroded, open or shorted

Sep 29, 2010 | Pontiac Grand Prix Cars & Trucks

1 Answer

Check engine code p1676


P1676 99-00 FPTDR signal line failure. Check connections between PCM and ABS/TCS control unit. If wires are good replace ABS/TCS Control unit. If it doesn't fix replace PCM.

Reset the code and see if it comes back.

CLICK HERE for a GREAT breakdown and troubleshooting.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Sep 19, 2010 | 1998 Chevrolet Lumina

2 Answers

Check engine light code p1676 Chevy lumina Ltz


Trouble Code: P1676 (3.8L V6 VIN K Auto)
Evaporative Emission (EVAP) Purge Solenoid

Number of Trips to Set Code: 1
OBD II Monitor Type: CCM Details
Indicators: MIL Details
Trouble Code Conditions:
Conditions for Setting the DTC.
  • The ignition is on.
  • An improper voltage level has been detected on the output circuit which controls the EVAP purge solenoid.
  • The above conditions are present for at least 30 seconds.

Possible Causes:
  • Poor connection at the PCM. Inspect harness connectors for backed out terminals, improper mating, broken locks, improperly formed or damaged terminals, and poor terminal to wire connection.
  • Damaged harness.
  • Inspect the wiring harness for damage. If the harness appears to be OK, disconnect the PCM, turn the ignition on and observe a voltmeter connected between the EVAP purge solenoid control circuit and ground at the PCM harness connector while moving connectors and wiring harnesses related to the EVAP purge solenoid. A change in voltage will indicate the location of the malfunction.

1998 Chevrolet Lumina - Powertrain - Engine Controls - 3.8L - DTC P1676 Evaporative Emission (EVAP) Purge Solenoid Control Circuit

Aug 13, 2010 | 1998 Chevrolet Lumina

Not finding what you are looking for?
1998 Buick LeSabre Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...