Question about 2003 Toyota Corolla

1 Answer

Looking for the starter in a 2003 toyota corolla

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

Some of these engines have the starter sitting on the top of the transmision.

Posted on Mar 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 Toyota corolla and my car won't


Same thing happened to me. Turned out to be a blown Alt fuse (under the hood behind the battery, you'll have to unbolt the whole fuse box though. That fuse is bolted in from underneath) and a blown am2 fuse (look underneath the dash of the driver side from inside the car). I switched those out and the car started right up

Mar 24, 2012 | 2003 Toyota Corolla

2 Answers

Where is the starter for a 2003 toyota corolla located? Thanks!


Hi,
Standing in front of your Corolla with the hood open ,the starter is located right below the intake manifold(curvy tube like looking ) This is in the center of the engine.
A plastic water guard underneath the car prevents you from seeing the starter from below.
That water shield will need to be removed to access the starter.
Wayne

Nov 21, 2010 | 2003 Toyota Corolla

1 Answer

Where is the starter located at on an 03 toyota corolla


the starter is directly connected to the transmission of the car. its easier to see from under the car.

Apr 27, 2010 | 2003 Toyota Corolla

1 Answer

Where is starter on 2003 toyota corolla


the starter motor is attached to the end of your engine next to the bell housing of your transmission..

Apr 06, 2010 | 2003 Toyota Corolla

1 Answer

I have a 2003 toyota corolla with a bad starter how do i remove?


    1. Remove or disconnect the following:
    2. Battery and tray. On models equipped with an air bag, work must NOT be started until at least 90 seconds have passed from the time that both the ignition switch is turned to the LOCK position and the negative cable is disconnected from the battery.
    • Coolant reservoir
    • Reservoir hose from the radiator
    • Right side under cover
    • Wiring clamp
    • Wiring from the starter
    • Starter
  • To install:
    1. Install or connect the following:
      • Starter
      • Starter wiring and nut
      • Starter connector and wire clamp
      • Right side engine cover
      • Radiator reservoir and hose
      • Battery and tray
    2. Check the cooling system and top off if necessary

    Oct 26, 2009 | 2003 Toyota Corolla

    1 Answer

    '03 Toyoya


    I'll presume it's a US 1ZZ:

    1. REMOVE ENGINE UNDER COVER RH
    979dc2f.gif
    1. REMOVE STARTER ASSY
      1. Disconnect the starter connector.
      2. Remove the nut and disconnect the starter wire.
      3. Remove the 2 bolts and starter.
    1. INSTALL STARTER ASSY Torque: Bolt 37 Nm (378 kgf.cm, 27 ft.lbf) Nut 9.8 Nm (100 kgf.cm, 7 ft.lbf)

    Sep 12, 2009 | 2003 Toyota Corolla

    1 Answer

    Relay fuse 2003 Toyota corolla S


    iam trying remove a starter from a 2003 toyota corolla type s?

    Sep 19, 2008 | 2003 Toyota Corolla

    Not finding what you are looking for?
    2003 Toyota Corolla Logo

    Related Topics:

    194 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    60960 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6812 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...