Question about 2007 GMC Yukon Denali

Open Question

Need to hook up new ceiling mount screen. 2007 Denali

I had the ceiling mount screen stolen and they took both sides of its wiring harness. I bought a replacement screen (Panasonic 15294214) which comes with the female side of the screen. I am trying to match up wire for wire but the colors are not the same. I would just replace the entire harness to the dvd player but it was quoted as >$400. I also do not want to try to take the entire headliner down myself.

The DVD player side has has the following color wires: red w/ white, green, white w/black, black, white, green w/black, orange w/black, and one w/out shielding.

The screen side's wiring harness has: white, 2 x black, green, yellow, red, blue, and orange

Does anybody have a diagram or knowledge of which color goes where?

Posted by on

6 Suggested Answers

jamesmac
  • 71 Answers

SOURCE: car stereo wiring

MOST GM Vehicles P o w e r Memory (+12v Constant) - Orange or Red Ignition (+12v Switched) -  Yellow Ground (-) - Black Illumination - Gray Dimmer - Brown Power Antenna  - Pink or blue
S p e a k e r s Right Front (+) Light Green Right Front (-) Dark Green Left Front (+) Tan Left Front (-) Gray Right Rear (+) Dark Blue Right Rear (-) Light Blue Left Rear (+) Brown Left Rear (-) Yellow

Posted on Sep 09, 2008

farroutideas
  • 78 Answers

SOURCE: wiring diagram or fuse box diagram-2007 GMC Envoy Denali

Hi there;

Here is the wiring diagram for the trailer wiring for your truck.
22593cd.jpg
Hope this helps
Farrout!

Posted on Mar 18, 2009

  • 40 Answers

SOURCE: Electrical problem with fuel pump 97 Yukon

Go to autozones web sight and look up under self repair. they have a wire diagram.

Posted on Mar 23, 2009

MNfisherman
  • 11896 Answers

SOURCE: right side front light harness plug

That is exactly what it is. Most foglights connect to one connector

Posted on May 06, 2009

  • 62 Answers

SOURCE: Wire harness for trailer

Hello

i am also having a same issue i get the help from


http://www.rvmechanic.com/current_category.2177/Forum.40676/offset.30/forum_thread_full.html

i think so it is going to helpful for you also

Thanks & Regards

Posted on May 23, 2009

  • 103 Answers

SOURCE: bought halo projector headlights.how install?

i think those require an ignighter box

Posted on Mar 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Took to dealer for a left motor mount and new transmission my steering wheel locked and now it doesn't lock when I turn off the key and the heater on the steering wheel stopped working.


You can have the codes read for the BCM. This is just coincidental. Changing the mount and transmission wouldn't cause problems in the steering column.

Oct 08, 2016 | 2007 GMC Yukon Denali

1 Answer

Took the auto transmission out of a 1991 Toyota Cressida put a manual transmission in how do I hook up the clutch safety switch.


you need wiring schematics for the auto and manual transmissions and go from there. and now you need to purchase a bracket for the clutch pedal for proper mounting

Jul 28, 2014 | 1991 Toyota Cressida

2 Answers

WHY PASSENGER SIDE HEADLIGHT BULB ON 2007 YUKON DENALI WILL NOT WORK


Remove plug from light bulb, using 12 volt test light hook up ground to negative side of battery,then touch probe on positive terminal to make sure test light is functional.next- turn lights on and then probe the plug at each terminal- there should be one wire that has power and the test light should light up. If the test light lights up then you need to test the circuit ground for the wiring harness. So remove the test light clamp and put it on the positive post of the battery. Now retest the test light by touching the probe on the negative post on the battery and the test light should light up. Next with the headlights off-probe the other terminals and if there is a good ground in the harness the light will light up- if not then there is an open condition in the headlight harness- a broken wire or a bad system ground.If both tests are performed and either condition does not happen then a wiring schematic will be needed to perform the repair. This is after all fuses are presumed good.

Feb 04, 2013 | 2007 GMC Yukon Denali

1 Answer

I need to conect both electric fans on my chevy 2006 silverado 8 cilinder


This is just a social web site,no experts & data
base of info to E- mail you

If your missing or have cut off & destroyed wiring,
you will obviously need a wiring diagram to repair
that part & restore things as the vehicle was built,
so you just mount the new fans & plug in

Jan 26, 2013 | 2007 Chevrolet Silverado 1500 2WD

1 Answer

Charging system, alternator


some friend...... have a repair shop check it out and fix the wiring like its supposed to be. it going to be costly, more than just replacing the alt in the first place.

Jun 03, 2010 | 1997 Pontiac Sunfire

1 Answer

Side mirror stolen. Looking for specs to repair.


A local auto glass shop should be able to cut a piece of mirror for you, and may help install it.

Jul 20, 2009 | 2007 Suzuki Forenza Sedan

2 Answers

Trailor lights not working


The trailer wiring is dud. If you getting good signal at the car it must be the trailer. steve.. uk

May 13, 2009 | 1996 Ford Explorer

3 Answers

I dont know how to wire it to my car stereo wires


Do yourself a favor and run to audio store or even autoparts store & get an adapter plug/harness, cost is a few bucks but well worth it. It plugs into factory harness & you wire your new stereo to it according to diagram with new system.

May 02, 2009 | 2001 Dodge Stratus

1 Answer

Were to access tail light wiring harness 2008 Denali Envot


look goto autozone they have a all in connector for towing so much me easer about 40 dollars you go back to driver side rear harnes when you unplug it the pig tail joins all connectors to geather along with your traller pig tail no mus no fus

Mar 21, 2009 | 2008 GMC Envoy Denali

1 Answer

Installing hid headlights in my 2003 denali


You can not bypass you drls. I just put a hid kit in my 97 yukon. You have to buy a wireing harness that hooks into your harness currently on your truck. The only way to shut you dlrs off is you e brake

Nov 30, 2008 | 2003 GMC Yukon Denali

Not finding what you are looking for?
2007 GMC Yukon Denali Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...