If it is a v6 /3.4l the filter is justbelow manifold behind the left coolingfan you get at it from the bottom jack up leftside of car PUT
A JACK STAND UNDER CAR TO SUPORT CAR WHILE YOU REMOVE OLD AND REPLACE NEW OIL FILTER#85040 car quest hope this helps
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if the engine is a 2.4 litre the oil filter will be in front of the engine on the left side at the bottom the filter number will be a 3506 usally a fram number but pretty much the same number for several oil filter brands if it is a v6 here's a photo
While under the car on your back position yourself under the oil pan. The oil filter is located about a foot up and 6" to the right. It's above and behind the passenger side axle. It's parallel to the ground.
For the 2.2 L, working from top the engine (yep - I crawled around under looking), on the oil filler cap side, look down beside the power steering pump and you'll see a black plastic cap with a fairly large hex head (1 and 1/4") for removal.The filter is a paper element unit that comes up as an assembly when you remove the back cap. I removed the air filter duct and sensor wire for ease of access. But you use a bar extension (like 10 ") connect to an adjustable wrench to loosen gently and up it all came without the usual mess and disassembly of air filter duct and sensor wire. Just different. To close, the torque is 25 Nn.
The oil filter on a 2.2 liter...if it is an ecotec engine is right there toward the front of the engine on the right hand side. It is a cartridge filter. Just unscrew the cap, pull out old filter with the cap. Make sure the gaskets that come with the filter are replaced and snap new filter inside the cap and replace.