Question about 2003 Jeep Liberty
The handle broke off and I cannot find a way to open the glove compartment
Hello. I can assist you. Most likely, your door latch is broken and will need to be replaced. Historically these were metal and rusted due to exposure, soooooo now they are plastic and after a few hundred uses, they break. You can purchase the tailgate handle and replace it yourself but my recommendation is to let the shop do it as it can be a little tricky and often the linkage rods also need to be cleaned and lubricated. The total cost of this repair is generally about $75. Thanks for choosing Fixya!
Posted on Nov 13, 2009
SOURCE: tailgate will not open
There is a cutout on the inner tailgate cover that can be removed with a screwdriver. This will give you access to the latch assembly. There is a small lever mounted on the latch assembly. When you move it toward the driver side it will release the tailgate.
This works on my 03 Liberty but not on my 05 Liberty. They both use the same type of latch. Does anyone know where to get a latch other than a Jeep dealer? Jeep wants $235.00 for the latch.
Posted on May 07, 2009
If you raise the handle and look under it,you will see a metal loop sticking out,If you grab that with a pair of needle nose pliers Or other small pointed object and pull,It will open.
Posted on May 19, 2009
Check the blower motor speed dropping resistor pack and it's connections. It is located in the ducting airflow of the blower motor.
Posted on Jul 17, 2009
take a small precesion screwdriver and push the lever inside the housing ,that should do it.hope this helps
Posted on Jul 22, 2009
Tips for a great answer:
Feb 16, 2015 | 2006 Jeep Liberty Sport
May 14, 2014 | 2002 Jeep Liberty
Apr 02, 2014 | 2005 Jeep Liberty
Oct 22, 2012 | Volkswagen Cars & Trucks
May 21, 2010 | 2005 Jeep Liberty
Mar 09, 2010 | 2001 Mitsubishi Galant
Sep 19, 2009 | 2002 Jeep Liberty
Jul 18, 2009 | Saturn SL1 Cars & Trucks
May 19, 2009 | 1993 Dodge Intrepid
373 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: