I have a flat tyre and cannot undo the last nut it looks like its round but has 3 small holes in it, I have never seen anything like it before. i need help very urgently. Thankyou very much. pete.
SOURCE: Wheel nut PCD
Most of the on-line purveyors of rubber have a search feature that will show you the selection of tires and aftermarket wheels available for your ride.
Judging from your spelling of 'tires' <grin> you must come from a more civilized part of the world, so this link is only for reference purposes, shipping costs would be a deal killer:
http://www.tirerack.com/
SOURCE: What are the proper lug nuts to use on my 97 rodeo with 16" wheel
the lugs should have a flat washer and a spring washer the lug should have a long cylinder shape on one end that is tapered to tighten up the wheel the washers hold the plastic hubs in place you might try a wrecking yard or a dealer for them
SOURCE: lost locking weel nut with a puncture how do i change it???
You could try using vice-grips, if the nut is not too tight.
This might do a bit of damage to the nut, but you can easily purchase a new nut once you have the tire changed.
SOURCE: cannot find tool to loosen front wheel bearing lock nut
I have a 1995 Geo Tracker 4WD with the same exact problem,However I did some research . You will need to go to the Kent Moore Website which makes specialty tools and look up Wheel bearing socket "J-37763" I saw the picture of it and it looks like there are 4 small rounded teeth/tabs. Unfortunately get ready to spend some money - cost is about $70.00 not including shipping/handling
I hope that this Info. helps - Jim H.
SOURCE: need to reset to run flat tyre warning light on
i have a bmw , 1 series, i have just put air in my tyres and there is now a warning light on the dashboard, have i over inflated my tyres?
89 views
Usually answered in minutes!
×