Question about 1992 Ford Explorer

1 Answer

Hi ! I have a 1992 Ford Explorer 4x4 auto.trans.Vehicle has high miles (unknown).When I put it in gear I have to speed the engine up about a thousand rpm's and it seems to work ok.Every time I stop I have to go through the same proceedure. It happens when it is hot or cold. Any suggestions ? Thank you.Henry Anderson.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

You need to check line pressure on the transmission. It sounds like a bad pump. Does it do the same thing in reverse?

Posted on Mar 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1999 ford ranger shifts hard from 2nd to 3rd gear what is the problem I recently changed fluid and filter but shifts hard !


Auto Trans not shifting correctly from 2nd to 3rd - Ford Explorer ...

www.explorerforum.com > ... > Under the Hood

May 8, 2004 - 19 posts - ‎9 authors
Auto Trans not shifting correctly from 2nd to 3rd Under the Hood. ... Become an EliteExplorer. Lithuania. 1999 5.0. Join Date: Jun 2003. Posts: 107 ... When this happens, the transmission will skip to the next gear like you said.

Transmission Harsh shifting - YouTube

? 3:59
https://www.youtube.com/watch?v=aAoiL4vR8Qw
Jan 13, 2013 - Uploaded by James Burns
... Doctor, explores the causes of harsh shifting in automatic transmissions. ... Early diagnosis is important to ...

Hard Tranny Shift between 2nd & 3rd - Ford Truck Enthusiasts Forums

www.ford-trucks.com > ... > Super Duty & Heavy Duty
Feb 24, 2012 - Hard Tranny Shift between 2nd & 3rd Super Duty & Heavy Duty. ... I just got a new to me 99 f250 5.4 V8 SD XLT 4x4 Auto Trans longbox 118k miles. ... it out and said it was solid except for a hard shift between 2nd and 3rd gears. ..... Hard shift between 2nd and 3rd, Brenda Lamka, Explorer, Sport Trac, ... hard shift 2nd to third gear only 4r100
Dec 26, 2012
hard shift into 3rd
Nov 4, 2009
4r55e 5r55e Ranger / Explorer Transmission Problems - CLICK ...
Mar 15, 2007
00 Expedition trans shifts late and hard

Jan 01, 2016 | Ford Cars & Trucks

1 Answer

My 1992 ford explorer 4x4 is slipping the third gear HOW MUCH DOES A GEARBOX COST? AND DOES PUTTING A TRANS SEAL OR TRANS FLUID IN HELP?


hi,
just about all the the navajos and explorers have succumbed to what you are explaining here. the engine is good for a many more miles, go to the junkyard and find one that doesent have a tow ball and never towed anything, get the tranny and take it to your mechanic and then you may have your crate back..
jm

Mar 25, 2011 | 1992 Ford Explorer

1 Answer

How to use the 4x4


well, if you are sitting still it is recommended you put vehicle in neutral and select 4x4 indicator to desired posistion..... 4 high...4 low...or 2high (auto) when you select 4 low the top speed is not to exceed 25 mph. It is a very low gear for crawling or pulling. At any time you need 4 low gear you must stop trk, shift to neutral and select 4 low. The same procedure is done to change from 4 low to 4 hi or 2 hi. if not done this way internal trans, transfer case or driveline failure will occure. At any time you may shift 4x4 selector from (auto) or 2 hi to 4 hi, and 4 hi to 2 hi or( auto).****** But note, do not make shifts while tires are spinning or under power (acceleration)******* While driving you can make shifts at any speed between 2 hi (auto) and 4 hi and back to 2 hi. release throttle a little and select. you do not have to take foot off throttle all the way! just enough that truck is not under a power, load acceleration. If tires are spinning or you are on the gas and you select gears from 2 & 4 high the posibilities of severe damage can result. Also note that 4x4 is not recommended on dry pavement. When 4x4 is being used also take care as to the handling and the steering characteristics change, On tight turns the front wheels will bind and possibly **** a little. If you have never had a 4x4 before, obey what i have told you untill you get the experiance and you will be fine. HAPPY TRAILS.... AND A LITTLE 4X4 FUN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Jan 12, 2011 | 1998 GMC Jimmy

1 Answer

How do i put my 1992 explorer in 4WD


You can put it in 4x4 when you are dring straight and have no tires spinning , if you want 4x4 you must stop put the vehicle in neutral hold the brake and go to low range and must do the same thing going back to high

Mar 31, 2010 | 1992 Ford Explorer

1 Answer

91 Explorer revs up but won't go


your clutch is burned out, replace clutch. will it pull in 4 low?

Feb 25, 2009 | 1991 Ford Explorer

1 Answer

4x4 low feature


The noise you heard was the 4x4 mode engaging. This noise is normal.

Under normal operations, if you were to have wheel spin, this noise would happen quickly and numerously within a couple of seconds.

Be sure that before going above 20mph, that you press either the 4x4 HIGH, or 4x4 AUTO buttons to avoid damage to the vehicle.

Jan 28, 2009 | 2003 Ford Explorer Sport

1 Answer

2006 Ford Explorer slipping when accelerated


Change the auto transmission fluid and filter. Pay attention to the smell of the fluid. If it smells burnt, there is likely burned or worn clutches. You can compare the smell of the old fluid with the new fluid if you're a newbie. it also doesn't hurt to save a sample to share with an expert if you know one. Also pay close attention in the bottom of the pan for metal filings, fragments etc. A fine layer of black silt is usually normal. If the trans is burned out, there will be evidence in the pan. NEVER rev the engine to get an auto to go into gear, and avoid letting the transmission slip at all costs. Overhaul is a major job and very expensive. I don't know why they'd change wheel bearing on a slipping auto. Or why they couldn't diagnose it for you. Hope this helps.

Jan 10, 2009 | 2006 Ford Explorer

1 Answer

Why won't the 4x4 kick in on the 1994 ford explorer


I have a 1992 4x4 eddiebauer edition and unless I was doing 25 miles an hour mine would not kick in either. For low range I had to put it in 1 on the gear shifter

Jan 08, 2009 | 1994 Ford Explorer Limited

3 Answers

I need a diagram for 1994 ford explorer transmission


I have a 1994 Ford 4x4 6 the trans has starting to act funny when cold won't go in drive for about 5 min, also takes a long time to change gears after gets warm. I'm changing fluid and filter to see if that will help.. Any help is much needed thank you
picker2-99@yahoo.com

Dec 20, 2008 | 1994 Ford Explorer Limited

Not finding what you are looking for?
1992 Ford Explorer Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...