Question about 1999 Dodge Avenger

2 Answers

Does the upper intake manifold have to be torqued

Dodge avenger v6

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 653 Answers

If you don't torque the bolts, you run the risk of warping the mating surfaces, leading to vacuum leaks and rough running. I don't have the torque spec for the 1999 Avenger 2.0 liter 4 cylinder or the 2.7liter six cylinder, but the torque setting for my 2.4 liter PT Cruiser is 105 INCH/pounds or 12 newton/meters. I highly recommend the Haynes manuals if you are going to be a Do-It-Yourselfer.

Posted on Mar 01, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

No, but it is a real good idea. I would,it keeps you from breaking stuff.

Posted on Mar 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

03 Dodge Intrepid intake manifold torque specs top & bottom is for 3.5 V6


Lower Intake:
  1. Use a skin coat of RTV silicone on both sides of the water passage ports (outer most holes) and put the new lower intake gaskets into place
  2. Hand tighten the 13mm head intake bolts and Torque the bolts , starting from the center and working your way out in a circular pattern
  3. Torque these bolts in a few small increments until they have reached 250 inch pounds of torque.
  4. Upper Intake Plenum:
  5. When installing the intake air plenum , be sure to catch the four center bolts and the two side bolts (stiffener brackets) before tightening , The center bolts should be torqued to 250 inch pounds .The fuel rail bolts should be torqued to 100 inch pounds

Jun 24, 2016 | 2003 Dodge Intrepid

2 Answers

2008 dodge avenger code p2004


Intake Manifold runner control stuck open - bank one:
- Intake Manifold Runner Binding Or Sticking
- Faulty Manifold flow valve
- Manifold flow valve harness is open or shorted
- Manifold flow valve circuit poor electrical connection

There is a factory service bulletin for this problem for 2007-2008 Dodge Avengers. (JS)

Sep 22, 2015 | Dodge Cars & Trucks

2 Answers

2008 intake manifold diagram


There is no such code for the vehicle identified.

Dec 30, 2014 | 2008 Dodge Avenger

1 Answer

Can you tell me torque requirement for intake manifold bolts on a 1999 Alero V6?


upper intake bolts torque is 18 ft lbs - lower intake bolts torque is 115 inch lbs.

Sep 21, 2011 | 1999 Oldsmobile Alero

1 Answer

Need torgue specs & sequence for upper & lower


Lower: Torque to 28 N·m (250 in. lbs.)

Upper: Torque to 12 N·m (105 in. lbs.)

Sequences below:

mf_grimm_1.jpg

mf_grimm_2.jpg

Good luck.

Jul 23, 2011 | 2004 Dodge Intrepid

1 Answer

WHAT IS THE TORQUE ON A 94 BUICK CENTURY 3.1 V6 ON THE INTAKE AND EXHAUST PUSH RODS?


Tightening sequence would be to tighten from the center most bolts to the outer most bolts.
Intake Upper Bolts = 18 lb.ft.
Intake Lower Bolts = 10 lb.ft.
Exhaust Manifold Nut = 12 lb.ft
Exhaust Manifold pipe = 22 lb.ft.
Exhaust Manifold Heat Shield = 18 lb.in.
Rocker Arm Torque Nuts = 18 lb.ft.

Hope this helped you ?? if you need more info, get back to me.....

Jun 16, 2011 | 1994 Buick Century

1 Answer

I need torque specs got ptatnum anmd intake for 1995 olds 88 with 3.8 v6





Lower Intake Manifold
dak408_86.gif

15 Nm (11 ft. lbs
########################################################

Upper Intake Manifold

dak408_87.gif
10 Nm (89 in. lbs)
##########################################################

Nov 25, 2010 | 1995 Oldsmobile 88

1 Answer

What is the torque specifications for the intake manifold for my Lincoln Ls V6 2002


Upper intake manifold bolts : 89 in.lb. Lower intake manifold bolts : 89 in.lb. Thottle body bolts :89 in.lb. Front intake manifold support nut:89 in.lb. Upper intake support bracket nuts :53 in.lb. Reference:Service manual if you need further assistance please let me know and i will be glad to assist you further. If this has assisted you please feel free to rate the solution thanks -Midwest-tek

Aug 27, 2010 | 2002 Lincoln LS

1 Answer

97 dodge avenger-the tube behind water pump is


the dealer should be able to get these. you may have to remove the intake manifold or see what you have to remove in order to do the job. its not something an amateur should try to do. They usually leak because of poor maint, and degraded coolant. If its leaking, more cooling problems are likely on the way.

Jul 22, 2009 | 1997 Dodge Avenger

2 Answers

Where is the back three spark plugs located?


If it is a v6 you need to take off the upper intake manifold to get to it.. Remove the bolts from middle out. I just had to replace mine and I hated it. Hope this helps

Feb 20, 2009 | 1999 Dodge Avenger

Not finding what you are looking for?
1999 Dodge Avenger Logo

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...