Question about 1994 Jeep Grand Cherokee

1 Answer

My '94 Grand Cherokee Limited has no power in reverse.

My '94 Grand Cherokee Limited engages into reverse fine no grinding no slipping ,but it has no power. Any ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

It sounds like the reverse band is out of adjustment. Three things can cause this, reverse band, front clutch and the overdrive direct clutch. To test the band, drive the truck in manual low up to 25 mph. Then let off, if the transmission doesn't pull the engine down, the band needs adjusted. If the front clutch is the problem, 3rd gear will be act weird too. The only test I know of for the overdrive direct is to inspect it, so process of elimination will have to work. Hopefully the problem is the band, because you can pull the pan, service the trans, adjust the band, and be done. Any of the other problems and you are looking at a rebuild. Good luck.

Posted on Mar 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my 1997 Grand Cherokee Laredo slipping gears when starting up from a stop


slips in reverse too? (other shoe falls off......)
same answer for all a/t slush boxes.
linkage from shifter to box ok?>
check levels first.
check fuses, if TCM acts dead, (wont autoshift)
change the filter,
get it serviced.
if frisky, read the FSM and do the stall tests and the line pressure tests. otherwise get it fixed.

Jun 06, 2016 | 1997 Jeep Grand Cherokee

1 Answer

2004 jeep grand Cherokee limited 4.0 squeak from transmission when first engaged in reverse. I have verified this with a mechanics stethoscope, the warmer it gets the quieter it gets, sound is louder


great but no transmission stated.
a/t
42RE? or 45RFE?
check bolts on flex plate? (TC flex plate to fly juncture)
seem like a torque reaction , caused squeak, ( i cant hear it so...)
the mounts, spray them all with silicon spray, try that first before
a new $2-3000 trans..
U-joints? spray them next, if now gone ,bingo>
keep in mind noise can telegraph. that means
noise can travel far , from origin. fooling any one with a stethoscope.

Nov 03, 2014 | 2004 Jeep Grand Cherokee

1 Answer

94 jeep grand cherokee limited wont drive


sounds like a bad transmission. did you check the transmission fluid level,and if you need to add any transmission fluid use only chrysler plus 4. this is my link to my garagehttps://www.facebook.com/TedsRepairs

Nov 20, 2012 | 1994 Jeep Grand Cherokee

1 Answer

2004 Jeep Grand Cherokee Limited makes rear noise when turning left?


Could be low on oil, or need a shot of additive if it is a limited slip differential.
The noise may be the clutches in the diff or one of the axle bearings.

Jul 26, 2012 | 2004 Jeep Grand Cherokee

1 Answer

I was driving my 99 Grand Cherokee limited in 4Lo then it just popped out of 4Lo into neutral and will not re engage! When i put it into 4Lo it just revs and grinds when i step on the gas and truck wont...


Try putting the truck into reverse before going into neutral, then put it into 4-lo. Sounds like the transfer case linkage might need to be adjusted, nothing major. I've owned NUMEROUS Jeeps, and every one with an auto tranny was a PITA to get into 4-lo. And if it isn't engaged completely, it will pop out every time.

Nov 20, 2010 | 1999 Jeep Grand Cherokee

1 Answer

We bought a 1995 jeep grand cherokee orvis edition...the truck will not go into reverse...it makes a wierd grinding noise


Be sure that the truck is fully engaged in two wheel drive. It may have slipped out of gear on the transfer-case. Move the lever for 2 and 4 wheel drive back and forth a few times before shifting transmission.Good luck

Apr 25, 2009 | 1995 Jeep Grand Cherokee

1 Answer

94 jeep grand cherokee limited


Could be the neutral safety switch. You can test it fairly easily by following the instructions on testing the continuity of the pins in the switch socket at this site http://cherokee-jeep.com/1-2swremov.htm
The switch is on the passenger side of the transmission, cable is about 2 feet long and can be unplugged under the hood near the passenger side of the firewall where it comes up from underneath the car. If any of the gears aren't reading continuity it may need to be replaced.

Oct 07, 2008 | 1994 Jeep Grand Cherokee

1 Answer

Tranny failed '96 Grand Cherokee Orvis Edition


I just had to replace the gov solenoid and sensor in trans.Would do same thing ,feel like someone shifted to neutral.

Jul 19, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1994 Jeep Grand Cherokee Logo

405 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...