Question about 2000 Chevrolet Blazer

2 Answers

Intalling distributor in 2001 chevy blazer

How do i install the distributor?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Remove the distributor cap mark the position of the rotor on the distributor mark the position of the distributor on the intake or fire wall remove the hold down bolt and slowly remove the old one make sure the gasket comes off too to install just reverse the steps lining up the marks you made

Posted on Mar 01, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

What happens if you lost your mark on the rotor

Posted on Jun 11, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Installed distib but its poping and sputtering in a 2001 blazer marks where lined up also and was on the number 6


Make sure the firing order is correct. I think this link will work:

http://www.carrestorationshop.com/2001_chevrolet_blazer/q2850542-firing_order_2001_blazer_lt

Aug 02, 2016 | 2001 Chevrolet Blazer

2 Answers

What would cause a 2001 chevy blazer to not start? we replaced sterring column and it acts like its not getting gas turns over to start but wont start what could be the problem? would the the brain ne


The ECM does not recognize the different key. A tool referred to as a Tech-2 plugs in to the scan port, the truck is put in learn mode and the prompts on the tool are followed, this "programs" the ECM recognize the new key.

Dec 02, 2014 | 2001 Chevrolet Blazer

1 Answer

How do I time a 2001 Chevy Blazer ZR2 4.3L? Why is it throwing codes in my 01 Chevy Blazer ZR2 4.3L for crankshaft and camshaft sensors?


was the distributor move, sometimes the rotor in the distributor will move just a hair. turn the motor by hand to tdc and see where the rotor is pointing

Oct 29, 2012 | 2002 Chevrolet Blazer

1 Answer

How to set timing on a 1997 chevy blazer and get a diagram of it


sorry but the ignition timing is controlled by the electronic control module, (ecm) however if you have a scanner that can read datastream you can adjust the cam ******.. go to cam ****** on the datastream list , start engine rev to 1200-1500 rpm and check reading should be at 0 degrees plus or minus 2 degrees, if not you adjust at the distributor by rotating the distributor. the adjustment should be made with engine off then restart and rev again to 1200-1500 rpm and check the cam ****** again,by the way if unable to adjust the distributor gear of the distributor itself may be worn out and need replacement, hope this helps.

(this info is for the blazer)

May 04, 2011 | 2001 Chevrolet Cavalier

2 Answers

Trying to locate the ignition module for chevy blazer s10 1994


Ignition module sits in the ignition distributor, remove distributor cap, there will be two elec. harness plugs, the one with two wire's is for the pick up coil, the other one is for the ignition module, just unscrew module out of distributor and install new one.

Sep 23, 2010 | 1994 Chevrolet S-10 Blazer

1 Answer

I have a 2001 chevy blazer. after having a head gasket put on it will only run 180% out of time


Was the distributor put in backwards? (180 degrees out?)
Turn the crank to TDC, (drivers side front piston, or #1, should be going up, as it will push air on it's way. Then see if the distributor is pointing to the #1 wire.

Aug 12, 2010 | 2001 Chevrolet Tahoe

1 Answer

How to install cap and rotor on a 2000 chevy blazer 4.3ltre v-6


Disconnect the wires and take pictures with cell phone for reference to ensure you don't cross them when reinstalling the new distributor cap. Remove the two torque screws in the distributor cap and remove the distributor cap to access the rotor. Remove the rotor by lifting straight up and inspect the distributor for any condensation and corrosion. Clean the breather screen at the bottom of the distributor before installing the new rotor which just slides back in place. Install the new distributor cap and tighten the new torque screws, make sure you do not over torque the screws since the distributor housing is plastic and prone to stripping. Reattach the spark plug wires and start the engine and idle for 5 min and go for a test drive. Good luck and you may want to also buy spark plug boot lubricant to ensure the spark plug wires are fully installed when placed back on the new distributor cap and recheck connections after test drive. Keep me posted, be glad to know your blazer is running 100% and please rate.

Jan 10, 2010 | 2000 Chevrolet Blazer

1 Answer

Where is the camshaft position sensor located on a 2001 chevy blazer


Also know as Distributor pick up assembly sit inside your distributor.

Jan 07, 2010 | Chevrolet Chevy Cars & Trucks

2 Answers

2002 chevy blazer won't start when it is cold/damp outside. Fuel pump repaced 3 times in a year. What could causing this?Starts fine when weather is nice.


could be a defective distributor cap(crack in it allows moisture in...moisture displaces the spark from where it needs to go).
You could try to replace the distributor cap and rotor.

Aug 30, 2009 | Chevrolet Blazer Cars & Trucks

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

1,570 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...