Question about 2005 Jeep Liberty
Put the back of car on jack stands and secure the front tires so it does not roll and then remove the bolts off the back of the caliper there is normally two one at top and one at bottom and spray it with some kind of oil for rust and make sure you have the right size socket before you try to loosen them and once caliper is off and the old pads removed take one of the old pads and squeeze the piston on the caliper back in by using a "C" clamp and also remove some of the brake fluid from the master cylinder before you do this put the new ones back on and check the brake fluid and make sure it is full and then pump the brakes to make sure you have a good pedal also put some "No Squeak" brake stop on the back of the pads so they don't squeak they will have that where you buy the pads from
Posted on Mar 01, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 02, 2010 | 2002 Jeep Liberty
Aug 24, 2010 | 2005 Jeep Liberty
Jun 12, 2010 | 2005 Jeep Liberty
May 20, 2010 | 2003 Jeep Liberty
Feb 04, 2010 | 2002 Jeep Liberty
Dec 30, 2009 | 2005 Jeep Liberty
Aug 15, 2009 | 2005 Jeep Liberty
Jun 09, 2009 | 2005 Jeep Liberty
Apr 12, 2009 | 2004 Jeep Liberty
3,650 people viewed this question
Usually answered in minutes!