Question about 1994 Oldsmobile Cutlass Supreme

1 Answer

No brake lights only inside high brake light working fuses ok

Checked fuses there goodtail lights and reverse lights working have replaced the bulbs but still no luck please help need to pass inspection in two days and need vehicle for work need a diagram or find out where to start

Posted by on

  • sjackson0115 Apr 06, 2009

    I have almost the exact same problem. My car brake lights wont come on with my 94 oldsmobile. I have a drivers license test in 2 days and had to rent a driving school car. fuses are fine and had bulbs tested. their ok...took to shop.. mechanic just said may be a short and will cost 600 bucks to fix.. i only paid 1000 for the car i cant afford that


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Rather than me explain how to do this in this post. Click on the link below and I think this will give you the answers you are looking for and fix your problem. Just to let you know I have just had the same problem and fixed this myself . All is good now.

This gives you great pictures and steps to solve and fix your problem.

Let me know if this works for you. I will be willing to explain and help in any way that I can.

Posted on Mar 18, 2009

Testimonial: "everything worked great excellent pics with step by step instructions was thrilled 2 get a answer and only took a week or so thanx again jwhitedrums"

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Turn signal problem.Fixed all bulbs and made sure flasher relay was working.all running lights brake lights reverse lights work and hazards work.but I get nothing on dash or lights when trying.

Double and triple check the fuse for your rurn signals both visually and with ammeter to check for fuse continuity, or just replace with new one of same amperage. The fuse can look good but have a hairline crack that is not visible.

Oct 19, 2015 | Cars & Trucks

1 Answer

Reverse light not working what to do

If bulbs are good then you need to check the switch that powers them when you put the car into reverse.

FYI - Neutral safety switch prevents car from starting unless it is in neutral transmission position only.

Oct 05, 2015 | Cars & Trucks

2 Answers

Reverse light dont work

No they should only come on when you put in reverse or else everyone would think you were backing up! its your bulb if just one, the fuse if both or the reverse switch indicator... Good Luck

Jan 21, 2013 | 2003 Chevrolet Tracker

1 Answer

Fuse panel

If the other brake lights work it is not a fuse, They are all control buy one fuse,The bulb is burn,t out,

Nov 28, 2012 | 1993 Chevrolet G30

1 Answer

I just recently purchased a 2000 Ford Windstar. The headlight on the passenger side will not work. I have replace the headlamp and the fuse to that part....still to no light. Could you help me...

If you bought your truck at a licensed dealership or used car lot, most states require that if the vehicle will not pass inspection, the seller must repair the vehicle at their expense. First check for corrosion in the headlamp bulb socket. Also check the headlight relay and for damaged wiring between the bulb, relay and fuse box.

Mar 11, 2011 | 2000 Ford Windstar

2 Answers

1994 ford f150 no reverse lights.wont pass inspection, where is reverse switch located so i can test and what other steps can be taking. thank you

The reverse switch is on the left side of the transmission. Exact location depends on which engine/trans you have.

Sep 29, 2010 | Ford F-150 Cars & Trucks

1 Answer

2006 chevy impala rear tail light...

there is a connector that plugs into the light that should be looked at. is there any water leaks anywhere. there were problems with water leaks on some malibu models around the tail lights. pell open the inside covers and get to the tail light to inspect for this. also check those bulbs just in case they did go bad. any condensation in the light? not sure if the Impala has a single fuse for both tail light or one for each but you should check fuse box under dash and under the hood. good luck

May 14, 2010 | 2006 Chevrolet Impala

2 Answers


believe it or not, a 4 way flasher can cause this even if it itself is working properly, otherwise flasher, bulbs, or switch is bad .

Oct 06, 2009 | 1993 Isuzu Trooper

Not finding what you are looking for?
1994 Oldsmobile Cutlass Supreme Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides