Question about 1999 Dodge Dakota

1 Answer

2000 dodge dakota door panel

Where can i find them.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There are five screws to be removed, two of which are Torx bit. One is in the center of the door panel towards the top. One is behind the door latch handle. One adjacent to the side view mirror, and two along the bottom. There is an access panel along side the door latch handle you need to pop off with a screw driver. It is triangular in shape and about 5 inches long. Once that is removed you will see the door latch linkage to latch handle. Disconnect the linkage by unsnapping the plastic retainer off of the linkag rod and swing it so the rod can be lifted out of the hole. The window crank handle is a *****, you will need a dentist's pick or similar to remove a retaining clip just behind the handle but in front of the panel. The it is just an upward and outward movement on the panel and it should come right out.

Posted on Mar 16, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2000 dodge dakota ext cab V8 & I need a filler neck. Was wondering what years are interchangeable and if Durango's would b the same??

any neck from 1997 to 2003 dakota will work as long as we are talking reg. cab and extended cab dakotas altho 4 door dakotas may work

Dec 02, 2015 | Dodge Cars & Trucks

1 Answer

How to replace driver's side window on a 1987 dodge dakota

you need to remove the inner door panel and unbolt the glass from the regulator

Aug 22, 2012 | 1987 Dodge Dakota

1 Answer

2000 2wd Dakota Quad cab, right rear door latch

Sounds like either a linkage rod came off or the interior handle is broken. either way you have to take the interrior door panal off to see which it is.

Oct 09, 2009 | 1991 Dodge Dakota

1 Answer

Glove compartment door on my 2000 Dodge Durango SLT won't open

What models of dodge are interchangeable with a 2000 Dakota glove door latch?

Sep 19, 2009 | Dodge Durango Cars & Trucks

1 Answer

Passenger side manual window 2000 dakota wont roll up or down.

The lift motors that I have done were straight forward. A few bolts, 1 or 2 connectors and put new motor on and tighten down. Good luck

Jul 03, 2009 | 2000 Dodge Dakota Quad Cab

1 Answer

Dodge 2002 dakota sport diver side power window will not roll up

Sounds like the stop for the window broke or the window traveled too far down and the gear no longer is engaged with the window rack gear you will know when you remove the door panel be careful with the panel clips the break easily

Jul 01, 2009 | 2000 Dodge Dakota Quad Cab

1 Answer

My drivers side window fell into the door on my 2000 dodge dakota 4 door. Can I fix it myself?

You should be able to fix it yourself by carefully taking the inside of the door off. If you have power windows, your window actuator has gone bad which happens often in Chrysler vehicles, and will need to be replaced. Until you get your hands on the actuator, you can jam a piece of paper or cardboard in, to keep the window up. Good luck and thanks for using FixYa!

Jun 27, 2009 | 2000 Dodge Dakota Quad Cab

1 Answer

Removing window handle so i may reach the inside door panel

the window crank is held on by a c-clip. To get it off you take a medium sized flat tip screwdriver and slip it in between the back of the crank and the panel GENTLY or you will tear up the door panel.BAD. Pry the panel away from the crank and you should be able to see the c-clip, then use a small bladed screwdriver to pop off the clip. Some times,just take your time it aint easy but it will come off and your in buisness. to get it back on do the opposit and give it a smart pop and it will usually go right on. hope it helps.

May 18, 2009 | 2000 Dodge Dakota Quad Cab

Not finding what you are looking for?
1999 Dodge Dakota Logo

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides