Question about 1995 Ford Bronco

3 Answers

Radiator support mounts for 95 Bronco

Is that even the correct name? Cause I can't find them anywhere? What is the name and where can I find them? thx

Posted by on


3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

Radiator core support can be bought after market go to the local paint shop for automotive paint and ask for the local aftermarket body parts shop or your local junk yard I could give you some names but you would have to pay shipping. the radiator core support goes across te front of the car and holds the radiator in place it will have cut outs for the headlights and must be drilled out at the spot rivets and re-weld into place.

Posted on Nov 28, 2009

  • Bruce Hathcock Nov 28, 2009

    Ford has them in stock on the west coast and midwest so you can order it from ford and they wil ship it for free. also fords parts will line up better than after market parts less fittng streaching and lineup better but is $100. 00 more but better quality.


  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 29 Answers

Go to

Posted on Nov 28, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 532 Answers

A salvage yard is about the only place i can think of,the parts are probably discontinued at Ford

Posted on Apr 25, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My bronco is over heating

could be rad.thermostat stuck close,

Feb 21, 2013 | 1990 Ford Bronco

1 Answer

I need the fireing order for my ford bronco its got a 351 its a 95 i need a the gap for the spark plugs *** well

The firing order on the 351 that came in the 1995 Bronco is: 1-3-7-2-6-5-4-8
The spark plug gap should be on the emissions sticker under your hood, usually on the radiator support. It may also be on the underside of the hood.
If you cannot find the sticker, try a .044 gap, if that doesn't work go a little higher to a .052.

Jul 30, 2011 | 1995 Ford Bronco

2 Answers

Locate the ICM on a 95 bronco 5.8L (ignition control module)

On 1995 Ford Truck Bronco 5.8L EFI 8cyl the Control Module-Ignition is located under hood, center, upper engine area, front of intake manifold, mounted on front side of distributor.


Fig. 1: A TFI-IV ignition module

Hope this helps (remember to rate and comment this free answer).

Jul 26, 2011 | 1993 Ford Bronco

2 Answers

Do i have to remove the fan in my 95 ford bronco to replace my radiator?

No but I would to prevent damaging the new radiator and ease of replacement

Oct 18, 2010 | 1995 Ford Bronco

1 Answer

Oil pan leak on 1994 bronco with a 5.0 liter

Oil Pan Removal
  1. Remove the bolts attaching the fan shroud (8146) to the radiator (8005) and position the fan shroud over the fan assembly.
  2. Raise vehicle.
  3. Remove exhaust manifold-to-exhaust pipe.
  4. Disconnect the oil cooler line at the left side of the radiator if equipped with an automatic transmission (7003).
  5. Remove the nuts and lockwashers attaching the engine support insulators to the chassis bracket.
  6. Drain the crankcase.
  7. Loosen transmission mounting nuts.
  8. Raise the engine (6007) and place wood blocks securely under the engine supports.
  9. Remove the oil pan attaching bolts and lower the oil pan (6675) onto the crossmember.
  10. Remove the oil pan from the vehicle.

Apr 07, 2010 | 1994 Ford Bronco

1 Answer

Bronco is running rough and fan is hitting shroud. Motor mounts look OKay? What gives

needs a tuneup depending on year there are egr valve and several other valves that could cause it to run bad/. As for the fan hitting the fan shroud try wiggling the fan back and forth to see it its loose, if it is watch to see what is wiggling, the water pump shaft or the fan blade device that spins free so that it's not making so much noise i forget the name at the moment but most cars have them and it fits on the water pump and the, oh yes fan clutch. If that is ok then the rear transmission mount may be bad or it is common that the fan shrouds come loose on the bottom.

Nov 10, 2009 | 1995 Ford Bronco

1 Answer

Oil sending unit leaks

"Motor" mount...shouldn't be anywhere near a motor mount! Should be near the distributor...or atop the intake manifold in the back of the engine near the firewall. This is a PAIN to replace, make sure the engine is cool...cause you HAVE TO climb inside the engine-bay to get to it. Make sure you teflon tape the threads of the new sending unit...
Good Luck
This is FULL SIZE Bronco description.

Jun 23, 2009 | 1988 Ford Bronco

1 Answer

Have a 95 Bronco--LOUD thud noise when I use the brakes

how long has it been since the breaks themselves were replaced?
what it seems like is there is either a break locking problem, or possibly the axle could be damaged.
not much but my suggestion would be to take it to get a diagnostics check on the full brono and see if an auto shop themselves can figure it out.

Mar 26, 2009 | 1990 Ford Bronco

1 Answer

1995 Ford Bronco. Fan killed radiator. second

You either have a problem with the rad moving or the engine moving. I would check the motor mounts. . also is this a stock fan? if not maybe the blocks are 2 big and the fan is 2 close ...

Mar 17, 2009 | 1984 Volkswagen Quantum

Not finding what you are looking for?
1995 Ford Bronco Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5648 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides