Question about 1997 GMC Jimmy

1 Answer

Wiper arm on 2001 chevy blazer on driver side does not move. what is the reason why?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 366 Answers

Check bolt at base of wiper arm under little plastic,try wipers if bolt is moving,screw it in tight,if pivot bolt is not moving,check linckage under cowl

Posted on Mar 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 chevy impala,drivers side windshield works great,the passenger side doesn't work at all,help!


You mean wiper arm ? Probably broken wiper arm linkage bushing you can't see , under the cowling . Can you move the passenger wiper arm up an down without much effort ? An not the drivers side ? To see it or get at it you would need to pull wiper arms off an take cowling off to get at it . How To Install Replace Wiper Motor 2000 05 Chevy Monte Carlo Impala How To Fix Broken Wipers EricTheCarGuy

Feb 12, 2017 | Cars & Trucks

1 Answer

The drivers side wiper will not sweep, when I turn on the wipers the passenger side works fine. The driver side attempts but doesnt sweep. So I doubt its the wiper motor. any ideas are welcome.


check the nut at the base of the wiper arm . There is a splined taper on the end of the wiper arm shaft and if this is loose then the arm shaft moves but it turns inside the base of the wiper arm.

Oct 22, 2014 | 2001 Chevrolet Chevrolet Blazer

1 Answer

How do I change wiper blades 2001 Chevy blazer


Open the cap at the end of the windshield wiper arm at the cowl of the Blazer. This will reveal the bolt that secures the wiper arm to the wiper linkage.
Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4pQJ39h
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4pJlPaV
  • 2 Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4p1UYyB

  • 2 Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4p1UYyB

    Jan 15, 2011 | 2001 Chevrolet Blazer

    1 Answer

    1994 chevy 1500 windshield wiper. One works fine, but the other only move 3 inches in the up position and it slides toward the side mirror


    your wiper transmission has dislodged itself from the wiper arm on the passanger side...
    Take hold of the passanger side wiper arm and see if it moves independantly ( not in sequence with the drivers side wiper arm).

    You may be required to remove the fresh air intake valance and install a new ( used?) wiper transmission assembly...
    What happens is the plastic cups on the wiper transmission wear out and pop off...
    easy fix ya !

    Sep 28, 2010 | 1994 Chevrolet Silverado 2500

    1 Answer

    Driver side windshield wiper, does not work, after a long cold night, it first moved slow, then stop moving altoghter. I can move it by self, will not move with the other wiper.


    The wiper arm stripped out. pop the cover off the base of the wiper then take the nut off. You should use a small 2 jaw puller or even a well placed prybar to force it off. Take a look at the base and the arm to see if one or both of these stripped the splines out.

    Jan 11, 2010 | 2001 Chevrolet Blazer

    1 Answer

    Wiperarm disconnected


    The arm presses into the transmission wiper link which is attatched to the wiper motor. If that part broke off and its in the wiper arm socket you need a new wiper transmission assembly. If the tud is still attached to the wiper transmission and the arm just plain came off there is a tab that pushes inward to lock it in place to the wiper transmission when fully pressed into place

    May 25, 2009 | 2001 Chevrolet Blazer

    2 Answers

    Driver side wiper arm moves only a little


    take the cap off the end of the wiper arm and tighten the nut

    Dec 18, 2008 | 2001 Dodge Caravan

    1 Answer

    Wiper arm


    well its easy lift up on the wiper blade arm, then put a rag under and around the other end so you dont scratch the paint. .use a screwdriver to pry up on the end that is connecteed to the vehicle one side then the other if you have problems let me know.
    fixincars@yahoo.com
    there is a tool available from snap-on just for this job and al body shops will have one maybe you can borrow one. if this information is helpful please give me a good rating

    Aug 01, 2008 | 1996 Chevrolet Blazer

    Not finding what you are looking for?
    1997 GMC Jimmy Logo

    Related Topics:

    341 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top GMC Experts

    yadayada
    yadayada

    Level 3 Expert

    70387 Answers

    Freddy

    Level 3 Expert

    1311 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22041 Answers

    Are you a GMC Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...