I have trouble with my 1992 Honda Prelude's car power. Help!
I've changed the spark plug wire and the spark plug rotter and cap. But it still has no fire in the car. There is no fire, or power, to the spark plug. I've changed the Main Riley but the car does NOT want to start. Please, if there is someone reading this, I would be very thankful of you to help me with my problem.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if you have changed the distributor cap,rotor button,spark plug wires and plugs and you still dont have fire then its most likely your distributor.first check the fuses or relays if you have replaced those items.
Try replacing your spark plug wires. It is probably just misfiring, which will cause the engine to "surge" and then back off. This will repeat until the misfire is fixed. I would start with replacing the spark plug wires, and if you have any more problems, let me know. The radiator cap coming off would have eventually caused the engine to overheat, but it sounds like you didn't let it get that far. The spark plug wires may have gotten wet due to the radiator cap coming off, and now the spark plug wires are shorting out worse than they probably already were.
THEN THE CAM TIMING MUST BE WRONG OR THE INJECTOS ARE NOT DELIVERING FUEL, HAVE YOU TESTED THE INJECTORS TO SEE IF THEY ARE PULSING AND DELIVERING FUEL? U CAN TEST THIS WITH A TOOL CALLED A "NOID" VER Y EASY TO USE, PLUGS INTO THE INJECOTR HARNESS AND FLASHES IF THEY WORK. ALSO VERIFY THE CAM IS SET RIGHT
I suspect that your spark plug wires or your distributor is going out. Check your spark wires and distributor. To do that take out #1 spark plug wire from the spark plug. Next take out your spark plug then put it in the spark plug wire. Then turn on car and take a look at the spark plug to see if it's getting a spark. Do this with all the spark plug. If it is your spark plug wire I would replace all of them.