Question about 1999 Chevrolet Suburban

1 Answer

1991 Dodge Ram250 wipers do not work on intermittent , you can hear a buzz when in the intermittent position whats up

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 260 Answers

Try replcaing the relay for the wipers first. Then the wiper motor then try the switch. I believe you will get a result before getting that techincal.

Posted on Apr 30, 2009

6 Suggested Answers

  • 1 Answer

SOURCE: 2005 Dodge Ram 1500 4x4 - Intermittent wiper problem

There is a fault with Wiper stalk have got same prob with my 2006 ram 1500 5.7l hemi they should change under warrenty are with mine

Posted on Nov 19, 2008

  • 30 Answers

SOURCE: 1994 dodge spirit wiper problem

bad wiring or just old wiring between everything

Posted on Mar 15, 2009

  • 202 Answers

SOURCE: wipers do not work in intermittent position. They do work in low and high speeds but do not automatically return to the park position. They stop wherever you turn the switch off.

i belive that your wiper switch has gone out on the intermittent side. this is a very common problem.
I hope this helps you
Thanks
Please leave rating

Posted on Apr 21, 2009

  • 19 Answers

SOURCE: Windshield wiper does not work on INTERMITTENT or

replace the motor.it will stop being goofy after that i promise

Posted on Sep 02, 2009

bolinlamar
  • 157 Answers

SOURCE: Will Not Start

Check the distributor for cracks and check the rotor inside the distributor, it may be worn out.

Posted on Sep 10, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 ford escape wiper and washer has no power. cant hear it engage when on but was working a week ago. how can i troubleshoot it and find the fuse


Hi Justin , Do you know what a SJB - smart junction box is and where it is located on you escape ?
Windshield Wiper Operation
The smart junction box (SJB) supplies power to the multifunction switch from the SJB fuse 25 (20A) when the ignition switch is in the ON or ACC position. The multifunction switch supplies power to the windshield wiper motor for the HIGH or LOW/INTERMITTENT input, depending on the multifunction switch position selected. The SJB also supplies power directly to the windshield wiper motor from fuse 25 (20A) when the ignition switch is in the ON or ACC position for RUN/PARK operation. When the multifunction switch is in the LOW, HIGH, or INTERMITTENT position, power is supplied to the windshield wiper motor, which moves the wipers off the park position. Once the wipers are off the park position, an internal switch in the windshield wiper motor switches to the run/park position which directs power to the wiper switch then back to the wiper motor. This maintains power to the windshield wiper motor to complete the wipe cycle. When the cycle is complete, the internal switch in the windshield wiper motor switches back to the park position. If the multifunction switch is in the LOW or HIGH position, power is supplied from the multifunction switch and another wipe cycle starts. If the multifunction switch is in the INTERMITTENT position, the windshield wipers remain parked until the internal relay in the multifunction switch supplies power to the windshield wiper motor. The internal relay supplies power after a time delay that is determined by the 1 of 9 intermittent switch settings.

Jan 08, 2017 | 2005 Ford Escape

1 Answer

Wiper control problem.


Lift up once: results in one swipe

Pull down to position 1: results in intermittent wiping

Pull down to position 2: results in constant slow wiping

Pull down to position 3: results in constant fast wiping

Jul 22, 2012 | 2002 Dodge Dakota Club Cab

1 Answer

I have 1998 dodge caravan. When you turn on the wipers, it keeps running and never shut off. Eventhough the wipers switch is working on slow and fast speed but when you turn the switch to off position, it...


There is a device made into the wiper motor itself, known as the wiper park switch. Its designed to turn off the wipers at a pre-determined position once you switch them off. The mfr recommends replacing the motor along with the intermittent timer (if equipped) at the same time when experiencing these problems.

Sep 06, 2011 | 1997 Dodge Caravan

1 Answer

I replaced the wiper motor on my 1997 dodge caravan and cant get the timing of the wiper arms right..... info on how to do this??


pull the wiper arms off. turn the wipers on intermittent so they work once. then put the wiper arms back on in the down position and tighten bolts on wiper arm. They should then be timed correctly. Please rate my post.

Jul 07, 2010 | 1997 Dodge Caravan

2 Answers

Dodge caravan 1996 During cold weather wiper malfunction


Hi

Sounds to me like the "parking" contacts inside the wiper motor have broken off / worn.
Needs to remove wiper moter / dismantle to inspect. (On some models you can purchase these contacts.)

Dec 10, 2009 | 1996 Dodge Caravan

1 Answer

Windshield wipers work intermittent


Typical problem is the pulse board on the wiper motor fails on this year of truck. I have had both a 97 and 98 K1500 and had to replace on both. Sometimes the wipers would work, sometimes they would quit when I was driving. Part is less than $50 at auto parts stores. Follow the instructions included. Requires removing 4-5 torx (star) head screws. Takes less than 10 minutes.

Nov 24, 2009 | 1998 Chevrolet K1500

1 Answer

2001 dodge caravan, intermittent part of the wipers do not work


As the intermittent wipers are based on resistance, try the easiest fixes first:1. Disconnect the negative terminal on the battery. Pull the relays for the blower motor and both wiper relays and the 30 amp fuse for the wipers. These are located under the hood in the fuse/relay box. The best way is to be careful and use a set of pliers. The reason you pull the blower relay is so that it is easier to pull the intermittent relay. Clean these off the blades of the relay with a burnishing tool (in a pinch you can use your wife's nail polisher that is like very fine sandpaper. Once the are a pretty silver color, wipe them off with some rubbing alcohol. Put them in and pull them out about 5 times into the relay socket and leave them in. Clean the blades for the fuse with a cue tip and rubbing alcohol and then put the fuse in and pull it out about 5 times then leave it in. Hook up the negative terminal and take the key to the on position and turn the wiper to the lowest position. If it works if should take about 36 seconds between strokes. 2. The next easiest is taking the cover off the top of the steering column and pulling off the wiper switch and replacing it. There are three screws that hold the cover and two that hold the switch plus the electrical connector. You can buy a used one at a "junk yard" for about $20. 3. Replace the wiper motor (takes about a couple of hours start to finish). It involves removing the wipers, the cowl (plastic cover over the wiper motor right below the windshield), loosening and lifting the scissor arms for the wiper arms and removing the motor (this involves disconnecting the power connector and feeding it back to the motor).Hopefully your issue is like 95% of the wiper issues and it is just a little bit of corrosion on the wiper relays and fuse!

Oct 01, 2009 | 2001 Dodge Grand Caravan

1 Answer

Need schematic for 1985 dodge ram250 4x4 main wire


Put a request, along with your vehicle specs (eng, trans, etc) on the vehicle help board at Ramchargercentral.com. There is a member over there that can email them to you and a many others who can help you troubleshoot as necessary.

Sep 09, 2009 | 1985 Dodge Pickup 4WD

2 Answers

Wipers do not work in intermittent position. They do work in low and high speeds but do not automatically return to the park position. They stop wherever you turn the switch off.


i belive that your wiper switch has gone out on the intermittent side. this is a very common problem.
I hope this helps you
Thanks
Please leave rating

Apr 21, 2009 | 2000 Isuzu Amigo

1 Answer

2005 Dodge Ram 1500 4x4 - Intermittent wiper problem


There is a fault with Wiper stalk have got same prob with my 2006 ram 1500 5.7l hemi they should change under warrenty are with mine

Oct 12, 2008 | 2002 Dodge Ram Maxi

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...