Question about 2002 Ford Mustang

1 Answer

I am having trouble getting my check light to go off after I had it checked and the EGR valve was replaced. The light comes back on after about 15 miles of driving and the code reads EGR poor flow. I can not find the problem.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 362 Answers

Insufficient EGR Flow Detected

Possible Causes:
DPFE sensor signal circuit is shorted to ground
DPFE sensor VREF circuit is open between sensor and PCM
DPFE sensor downstream hose off or plugged
DPFE sensor hoses both off, loose or damaged
DPFE sensor hoses connected wrong (reversed)
EGR orifice tube is damaged or restricted
PCM has failed
And what sets the code is…….Engine started, engine running in closed loop under steady cruise conditions, and the PCM detected the DPFE sensor input indicated insufficient EGR gas flow. Run the KOER Self-Test, and if DTC P1408 is present, the fault is currently present. This code sets in 2 Trip(s). The light will stay on until the cause is repaired. A bad EGR valve is only on possible cause.

Hope this helps,

Dave

Posted on Feb 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i stop my security light from coming on when i start my 2004 3.4 liter chevy impala ?


Hi Glenn, did you by chance replace your PCM with a used computer? If so you will need to have it reflashed, If not sounds to me like the Passkey security needs to be relearned. Also wondering why you replaced PCM after replacing EGR valve, Please if you can give me some more info on your veh. Body control module controls security so something is not right. Please get back to me, Thanks Randy.

Mar 14, 2015 | 2004 Chevrolet Impala

1 Answer

2005 magnum p0406 egr valve sensor code error


P0406 indicates high voltage on the EGR sensor circuit. this is recommended for every 30,000 miles be inspected. although EGR system do not requires periodic inspection. instead, check only if engine trouble's develop. most EGR's requires replacing EGR valve, cleaning passages and installing new vacuum hose. misrouted vacuum hose causes engine poor operation. so. not just to unplug it.

Aug 20, 2012 | 2005 Dodge Magnum

1 Answer

I changed the EGR valve on my '02 PT Cruiser about a year ago when I got the code, not the check engine light is coming on again but the car is running fine! I have taken it back to my mechanic twice to...


Its either a faulty EGR valve or it has carbon build up inside.Take valve off and clean carbon out using a non-chrlonated brake cleaner and wire brush.

Apr 21, 2011 | 2002 Chrysler PT Cruiser

2 Answers

97 oldsmobile sihouette error code p0400. Was told by Advance auto it was a bad egr canister solenoid. Replaced it but still have check engine light on. How do I get it off?


After you have made the repairs go back to Advance Auto and have them remove this stored trouble code .Most places will remove them from your computer for free.

Dec 06, 2010 | 1997 Oldsmobile Silhouette

2 Answers

EGR Valve pintle intermittently sticking or not opening


possible but the code refers to the valve and or the solenoid to operate the valve
could be a loose / broken wire or bad ground connection
if it is that bad , replace the egr unit complete

Apr 19, 2017 | 1997 GMC Sierra

3 Answers

Check engine light on 401


Should be the same as the Contour. Try these items, let me know.

go to www.contour.org a web site for contours, i got alot of info on
the old P0401 trouble code over there.. will cover your taurus as well
as the contours..... one is to clean the manifold by pulling off the
throttle valve body and pulling all the carbon deposits out of the
openings.. i had the P0401 on my 96 contur and changed out the EGR, the
EGR vacuum modulator and still have the problem code and will get to the
cleaning behind the throttle body when i get a chance to get to it....
been like this for about 2 yrs. now... no problems running the car, just
the light stays on... i can get it to go out by disconnecting the
battery but it comes back after two cycles in the car start up.....

Feb 24, 2010 | 2001 Ford Taurus

1 Answer

Check engine light came on and the error code is 040.4 what is it and can i drive it?


this is an egr valve trouble code..you need a new egr valve..make sure you disconnect battery when you replace it..sometimes fault will come back even though replaced valve

May 09, 2009 | 2005 Chrysler Town & Country

1 Answer

The check engine light stays on. When I connect the computer it says it is the gas cap or the EGR. I put a new gas cap on. Check engin light stays on. How difficult is it to replace the EGR valve?


its easy too replace but you need too reset your cmputer first too see if the light stays out before you go and buy the egr valve
disconnect the pos side of the battery for 5 min that will reset the computer,if the light comes back on then get the egr valve then you will have too reset it again

Apr 20, 2009 | GMC Suburban Cars & Trucks

1 Answer

1994 Buick Lesabre, Traction Control Light


U will have to run the tests for the trouble codes from both lights, they are unrelated, but chances are the CEL is the same problem, the EGR valve, in any event without the trouble codes there are far to many things to turn either light on to venture a guess, that kind of diagnosis costs allot of your money.

Dec 15, 2008 | 1994 Buick Park Avenue

Not finding what you are looking for?
2002 Ford Mustang Logo

685 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...