Question about 2005 Renault 181

1 Answer

Can not put service spanner sing off in laugna

Can you help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Press and hold mileometer button put keys in ignition keep holding button down turn on ignition keep holding button for 30 seconds it will go to 18000 then reset.

Posted on Mar 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 terios . Yellow spanner light comes on. What does that mean


The yellow spanner light indicates a service is due

Jul 09, 2015 | 2010 Daihatsu Terios 1.5

1 Answer

Esp light and spanner light on after a small wheel spin in the rain any ideas?


the spanner means you are due for a service based on mileage, esp light unknown but spanner just a coincident

Nov 27, 2013 | Renault Megane Cars & Trucks

2 Answers

How to reset service light on 307


Put you key in to the ignition turn so it turns the ignition on but don't start it on you dash board near the speedometer there is your trip button an a little spanner turn ignition on and off with this button being pressed this should solve it

Dec 17, 2012 | 2006 Peugeot 405

1 Answer

The wrench is going on in my 2008 ford focus


service light is on with this spanner sign and as its a late vehicle after 2005 then only dealer software can put it out so its a service at the dealer if you want it put out iam afraid

Sep 11, 2011 | 2008 Ford Focus

1 Answer

I have a spanner symbol on my 407. what does this mean??


You need to carry out the periodical car service due (e.g. engine oil & filter, air filter, fuel filter, cabin air filter). The "service" spanner symbol "reset" button is placed on the lower right corner of the dashboard. See picture below:

tdisline_303.jpg
Then you should reset the "service" spanner symbol by pressing on the "reset" button on dashboard, when ignition key is in OFF position. Hold the button pressed and turn ignition key in ON position. Hold the button pressed and see on the dashboard successive numbers will appear: "10", "9", "8", ... , "1", "0". Then release the button and switch OFF the ignition key. The "service" spanner symbol followed by "20000 km" (or "30000 km" depending of the engine type), will appear for few seconds after turning ignition key in ON position, and will dissapear after engine starting. The car service due was reseted.

Please do rate my response. Thanks!

Feb 21, 2011 | 2005 Peugeot 405

1 Answer

Need info on pergeot 206 instrument panel little dial at top gives milage but has a spanner as a sign why sorry couldnt find model 206 or year 1999 on yr site


Spanner means that it is due for a service, it should show for a period of time when you start the car and revert back to miles after a period of time, the length of time the spanner remain gets longer as you go more miles overdue for service. When you get it serviced the mechanic will reset the spanner/ Service interval

Sep 08, 2009 | 1991 Peugeot 405

1 Answer

How do i put the service spanner sing off in laugna 1.9dci


I don't know whether this will work but worth a try.
Keep the trip meter button pressed down, turn on the ignition hold the button down for 10/20 seconds and that may do it.
Please press the Blue Button to appraise my FREE! Effort.
I hope it worked?
Thank You!
Paul 'W'

Feb 28, 2009 | 2005 Renault 181

1 Answer

I am in the process of changinging a thermostat and need to know how to remove the fan. I removed the 4 screws to the pulley but the fan would not come off. please help


what year is it?
if it's an E36 it should have a viscous coupling.
you need a very large spanner or large cresent, [cant remember size] put the pulley & belt back on & tighten. the put the spanner or cresent on the large nut behind the viscous coupling & with a hammer give the spanner a quick hard wack clockwise to loosen. usually one or two decent hits free it enough to undo by hand. then put back together opposite directions. hope this helps.

Aug 13, 2008 | BMW 318 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...